Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 7-Day Trial for You or Your Team.

Learn More →

Guided and fluidic self-assembly of microstructures using railed microfluidicchannels

Guided and fluidic self-assembly of microstructures using railed microfluidicchannels Fluidic self-assembly is a promising pathway for parallel fabrication of devices made up of many small components. Here, we introduce ‘railed microfluidics’ as an agile method to guide and assemble microstructures inside fluidic channels. The guided movement of microstructures in microfluidic channels was achieved by fabricating grooves (‘rails’) on the top surface of the channels and also creating complementary polymeric microstructures that fit with the grooves. Using the rails as a guiding mechanism, we built complex one- and two-dimensional microsystems in which all the microstructures initially involved in the fabrication method were incorporated as components in the final product. Complex structures composed of more than 50 microstructures (each sized smaller than 50 μm) were fluidically self-assembled with zero error. Furthermore, we were able to use the rails to guide microstructures through different fluid solutions, successfully overcoming strong interfacial tension between solutions. On the basis of rail-guided self-assembly and cross-solution movement, we demonstrated heterogeneous fluidic self-assembly of polymeric microstructures and living cells. In addition to such assembly of in situ polymerized structures, we also guided and assembled externally fabricated silicon chips—demonstrating the feasible application of railed microfluidics to other materials systems. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Nature Materials Springer Journals

Guided and fluidic self-assembly of microstructures using railed microfluidicchannels

Download PDF
7 pages

Loading next page...
 
/lp/springer-journals/guided-and-fluidic-self-assembly-of-microstructures-using-railed-c6052JFt53

References (32)

Publisher
Springer Journals
Copyright
Copyright © 2008 by Nature Publishing Group
Subject
Materials Science; Materials Science, general; Optical and Electronic Materials; Biomaterials; Nanotechnology; Condensed Matter Physics
ISSN
1476-1122
eISSN
1476-4660
DOI
10.1038/nmat2208
Publisher site
See Article on Publisher Site

Abstract

Fluidic self-assembly is a promising pathway for parallel fabrication of devices made up of many small components. Here, we introduce ‘railed microfluidics’ as an agile method to guide and assemble microstructures inside fluidic channels. The guided movement of microstructures in microfluidic channels was achieved by fabricating grooves (‘rails’) on the top surface of the channels and also creating complementary polymeric microstructures that fit with the grooves. Using the rails as a guiding mechanism, we built complex one- and two-dimensional microsystems in which all the microstructures initially involved in the fabrication method were incorporated as components in the final product. Complex structures composed of more than 50 microstructures (each sized smaller than 50 μm) were fluidically self-assembled with zero error. Furthermore, we were able to use the rails to guide microstructures through different fluid solutions, successfully overcoming strong interfacial tension between solutions. On the basis of rail-guided self-assembly and cross-solution movement, we demonstrated heterogeneous fluidic self-assembly of polymeric microstructures and living cells. In addition to such assembly of in situ polymerized structures, we also guided and assembled externally fabricated silicon chips—demonstrating the feasible application of railed microfluidics to other materials systems.

Journal

Nature Materials – Springer Journals

Published: Jun 15, 2008

There are no references for this article.