Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 7-Day Trial for You or Your Team.

Learn More →

Effect of PEG additive on the morphology and performance of polysulfone ultrafiltration membranes

Effect of PEG additive on the morphology and performance of polysulfone ultrafiltration membranes http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Desalination CrossRef

Effect of PEG additive on the morphology and performance of polysulfone ultrafiltration membranes

Ma, Yuxin; Shi, Fengmei; Ma, Jun; Wu, Miaonan; Zhang, Jun; Gao, Congjie
Desalination , Volume 272 (1-3): 51-58 – May 1, 2011
Download PDF
Loading next page...
 
/lp/crossref/effect-of-peg-additive-on-the-morphology-and-performance-of-TDNSWtdck8

References

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

Publisher
CrossRef
ISSN
0011-9164
DOI
10.1016/j.desal.2010.12.054
Publisher site
See Article on Publisher Site

Abstract

Journal

Desalination – CrossRef

Published: May 1, 2011

References

  • Polysulfones and their derivatives: materials for membranes for different separation operations
    Staude
  • Development of polysulfone membranes for bacteria immobilization to remove phenol
    Chung
  • Fractionation of whey protein hydrolysates using charged UF/NF membranes
    Pouliot
  • Treatment of textile dye plant effluent by nanofiltration membrane
    Xu
  • Porosity of some commercial reverse osmosis and nanofiltration polyamide thin-film composite membranes
    Kosutic
  • The mechanism of formation of microporous or skinned membranes produced by the immersion precipitation process
    Wijmans
  • Formation of membranes by means of immersion precipitation. Part I A. Model to describe mass transfer during immersion precipitation
    Reuvers
  • Microstructures in phase inversion membranes. Part 2. The role of a polymeric additive
    Boom
  • Recent advances in the formation of phase inversion membranes made from amorphous or semi-crystalline polymers
    Wienk
  • Influence of processing conditions on the properties of ultrafiltration membranes
    Mosqueda-Jimenez
  • Role of polymer additive in casting solution in preparation of phase inversion polysulfone membranes
    Yeo
  • Effect of molecular weight of polymeric additives on formation, permeation properties and hypochlorite treatment of asymmetric polyacrylonitrile membranes
    Jung
  • Thermodynamic and rheological variation in polysulfone solution by PVP and its effect in the preparation of phase inversion membrane
    Han
  • Polymeric asymmetric membranes made from polyetherimide/polybenzimidazole/poly(ethylene glycol) (PEI/PBI/PEG) for oil–surfactant–water separation
    Xu
  • Effect of poly(ethylene glycol) 200 on the formation of a polyetherimide asymmetric membrane and its performance in aqueous solvent mixture permeation
    Kim
  • Effect of PEG additive and coagulation bath temperature on the morphology, permeability and thermal/chemical stability of asymmetric CA membranes
    Saljoughi
  • Gas separation performance of poly(4-vinylpyridine)/polyetherimide composite hollow fibers
    Shieh
  • Synthesis, characterization and performance of asymmetric polyethersulfone (PES) ultrafiltration membranes with polyethylene glycol of different molecular weights as additives
    Idris
  • Effect of molecular weight of PEG on membrane morphology and transport properties
    Chakrabarty
  • Effect of PEG additive on membrane formation by phase inversion
    Kim
  • Preparation, characterization and performance studies of ultrafiltration, membranes with polymeric additive
    Arthanareeswaran
  • Formation and morphology studies of different polysulfones-based membranes made by wet phase inversion process
    Blanco