Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 7-Day Trial for You or Your Team.

Learn More →

Preparation of monolithic polymers with controlled porous properties for microfluidic chip applications using photoinitiated free‐radical polymerization

Preparation of monolithic polymers with controlled porous properties for microfluidic chip... A broad variety of monolithic macroporous polymers with both controlled chemistry and porous properties was prepared using UV‐initiated free‐radical polymerization. The chemistry of the monoliths is defined by the composition of the monomer mixture used for the polymerization. The use of functional methacrylate monomers such as glycidyl methacrylate, 2‐hydroxyethyl methacrylate, butyl methacrylate, 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid, and [2‐(methacryloyloxy) ethyl] trimethylammonium chloride enabled the preparation of monoliths with reactive, hydrophilic, hydrophobic, and ionizable functionalities, respectively. The porous properties of these monoliths were mainly affected by the choice of the porogenic solvent system. Because the UV polymerization was carried out at room temperature, even low molecular weight alcohols and other low boiling point solvents could safely be used to create a versatile series of binary porogenic mixtures. Monoliths were prepared in spatially defined positions using the photolithographic technique within a fused silica capillary and on microfluidic chips, and the former was demonstrated with the separation of derivatized amines by means of capillary electrochromatography in the reversed‐phase mode. Similarly, a monolith prepared in the microchip format was used to demonstrate a microextraction with enrichment of a solution of green fluorescent protein by a factor of 1000. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 755–769, 2002; DOI 10.1002/pola.10155 http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Journal of Polymer Science Part A Polymer Chemistry Wiley

Preparation of monolithic polymers with controlled porous properties for microfluidic chip applications using photoinitiated free‐radical polymerization

Download PDF
15 pages

Loading next page...
 
/lp/wiley/preparation-of-monolithic-polymers-with-controlled-porous-properties-RzPKIONpBS

References (45)

Publisher
Wiley
Copyright
Copyright © 2002 Wiley Subscription Services, Inc., A Wiley Company
ISSN
0887-624X
eISSN
1099-0518
DOI
10.1002/pola.10155
Publisher site
See Article on Publisher Site

Abstract

A broad variety of monolithic macroporous polymers with both controlled chemistry and porous properties was prepared using UV‐initiated free‐radical polymerization. The chemistry of the monoliths is defined by the composition of the monomer mixture used for the polymerization. The use of functional methacrylate monomers such as glycidyl methacrylate, 2‐hydroxyethyl methacrylate, butyl methacrylate, 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid, and [2‐(methacryloyloxy) ethyl] trimethylammonium chloride enabled the preparation of monoliths with reactive, hydrophilic, hydrophobic, and ionizable functionalities, respectively. The porous properties of these monoliths were mainly affected by the choice of the porogenic solvent system. Because the UV polymerization was carried out at room temperature, even low molecular weight alcohols and other low boiling point solvents could safely be used to create a versatile series of binary porogenic mixtures. Monoliths were prepared in spatially defined positions using the photolithographic technique within a fused silica capillary and on microfluidic chips, and the former was demonstrated with the separation of derivatized amines by means of capillary electrochromatography in the reversed‐phase mode. Similarly, a monolith prepared in the microchip format was used to demonstrate a microextraction with enrichment of a solution of green fluorescent protein by a factor of 1000. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 755–769, 2002; DOI 10.1002/pola.10155

Journal

Journal of Polymer Science Part A Polymer Chemistry – Wiley

Published: Mar 15, 2003

Keywords: ; ; ; ;

There are no references for this article.