Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 7-Day Trial for You or Your Team.

Learn More →

Optimization of processing parameters and establishment of a relationship between microstructure and mechanical properties of SLM titanium alloy

Optimization of processing parameters and establishment of a relationship between microstructure... http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Optics & Laser Technology CrossRef

Optimization of processing parameters and establishment of a relationship between microstructure and mechanical properties of SLM titanium alloy

Wang, Zhen; Xiao, Zhiyu; Tse, Ying; Huang, Chuanshou; Zhang, Weiwen
Optics & Laser Technology , Volume 112: 159-167 – Apr 1, 2019
Download PDF
Loading next page...
 
/lp/crossref/optimization-of-processing-parameters-and-establishment-of-a-PZP4yapVDn

References

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

Publisher
CrossRef
Copyright
© 2018 Elsevier Ltd. All rights reserved.
ISSN
0030-3992
DOI
10.1016/j.optlastec.2018.11.014
Publisher site
See Article on Publisher Site

Abstract

Journal

Optics & Laser Technology – CrossRef

Published: Apr 1, 2019

References

  • Characterization of titanium alloy Ti6Al4V for chemical, marine and industrial applications
    Gurrappa
  • Effect of strain rate and temperature on strain hardening behavior of a dissimilar joint between Ti6Al4V and Ti17 alloys
    Wang
  • Microstructure and mechanical properties of a novel β titanium metallic composite by selective laser melting
    Vrancken
  • Crack propagation and fracture toughness of Ti6Al4V alloy produced by selective laser melting
    Cain
  • High-strength silicon brass manufactured by selective laser melting
    Yang
  • Wear behavior and microstructure of hypereutectic Al-Si alloys prepared by selective laser melting
    Kang
  • Analysis of defect generation in Ti6Al4V parts made using powder bed fusion additive manufacturing processes
    Gong
  • A review of defect modeling in laser material processing
    Teng
  • Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
    Khairallah
  • Transient dynamics of powder spattering in laser powder bed fusion additive manufacturing process revealed by in-situ high-speed high-energy X-ray imaging
    Guo
  • Parametric optimization of selective laser melting for forming Ti6Al4V samples by Taguchi method
    Sun
  • Surface morphology of Ti6Al4V plate fabricated by vacuum selective laser melting
    Sato
  • Effects of processing parameters on microstructure and mechanical property of selective laser melted Ti6Al4V
    Song
  • On the role of melt flow into the surface structure and porosity development during selective laser melting
    Qiu
  • On the role of thermal fluid dynamics into the evolution of porosity during selective laser melting
    Panwisawas
  • Control of shape and performance for direct laser fabrication of precision large-scale metal parts with 316L Stainless Steel
    Ma
  • Selective laser melting additive manufacturing of Inconel 718 superalloy parts: densification, microstructure and properties
    Jia
  • Microstructures of laser-deposited Ti6Al4V
    Wu
  • In-situ residual stress reduction, martensitic decomposition and mechanical properties enhancement through high temperature powder bed pre-heating of Selective Laser Melted Ti6Al4V
    Ali
  • Microstructure and deformation behavior of Ti6Al4V alloy by high-power laser solid forming
    Ren
  • Influence of defects on mechanical properties of Ti6Al4V components produced by selective laser melting and electron beam melting
    Gong
  • The positive effect of hot isostatic pressing on improving the anisotropies of bending and impact properties in selective laser melted Ti6Al4V alloy
    Wu
  • Manufacture by selective laser melting and mechanical behavior of commercially pure titanium
    Attar
  • Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti6Al4V
    Simonelli
  • A strategy to improve the work-hardening behavior of Ti6Al4V parts produced by additive manufacturing
    de Formanoir
  • Heat treatment of Ti6Al4V produced by Selective Laser Melting: microstructure and mechanical properties
    Vrancken
  • As-fabricated and heat-treated microstructures of the Ti6Al4V alloy processed by selective laser melting
    Vilaro
  • Effect of ultrasonic nanocrystalline surface modification on the water droplet erosion performance of Ti 6Al 4V
    Gujba
  • Binding mechanisms in selective laser sintering and selective laser melting
    Kruth
  • Densification and microstructural investigation of Inconel 718 parts fabricated by selective laser melting
    Choi