Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 7-Day Trial for You or Your Team.

Learn More →

BUFFER STRIPS TO PROTECT WATER SUPPLY RESERVOIRS: A MODEL AND RECOMMENDATIONS

BUFFER STRIPS TO PROTECT WATER SUPPLY RESERVOIRS: A MODEL AND RECOMMENDATIONS ABSTRACT: Buffer strips are undisturbed, naturally vegetated zones around water supply reservoirs and their tributaries that are a recognized and integral aspect of watershed management. These strips can be very effective in protecting the quality of public potable water supply reservoirs by removing sediment and associated pollutants, reducing bank erosion, and displacing activities from the water's edge that represent potential sources of nonpoint source pollutant generation. As part of a comprehensive watershed management protect for the State of New Jersey, a parameter‐based buffer strip model was developed for application to all watersheds above water supply intakes or reservoirs. Input requirements for the model include a combination of slope, width, and time of travel. The application of the model to a watershed in New Jersey with a recommended buffer strip width that ranges from 50 to 300 feet, depending upon a number of assumptions, results in from 6 to 13 percent of the watershed above the reservoir being occupied by the buffer. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Journal of the American Water Resources Association Wiley

Loading next page...
 
/lp/wiley/buffer-strips-to-protect-water-supply-reservoirs-a-model-and-OxwRQHGXWu

References (13)

Publisher
Wiley
Copyright
Copyright © 1990 Wiley Subscription Services, Inc., A Wiley Company
ISSN
1093-474X
eISSN
1752-1688
DOI
10.1111/j.1752-1688.1990.tb01430.x
Publisher site
See Article on Publisher Site

Abstract

ABSTRACT: Buffer strips are undisturbed, naturally vegetated zones around water supply reservoirs and their tributaries that are a recognized and integral aspect of watershed management. These strips can be very effective in protecting the quality of public potable water supply reservoirs by removing sediment and associated pollutants, reducing bank erosion, and displacing activities from the water's edge that represent potential sources of nonpoint source pollutant generation. As part of a comprehensive watershed management protect for the State of New Jersey, a parameter‐based buffer strip model was developed for application to all watersheds above water supply intakes or reservoirs. Input requirements for the model include a combination of slope, width, and time of travel. The application of the model to a watershed in New Jersey with a recommended buffer strip width that ranges from 50 to 300 feet, depending upon a number of assumptions, results in from 6 to 13 percent of the watershed above the reservoir being occupied by the buffer.

Journal

Journal of the American Water Resources AssociationWiley

Published: Dec 1, 1990

There are no references for this article.