Access the full text.
Sign up today, get DeepDyve free for 14 days.
Loading next page...
/lp/wiley/a-critical-review-of-crack-tip-stress-intensity-factors-for-semi-MqhG0NAUyD
References (28)
-
J. Rice, N. Levy (1972)
The Part-Through Surface Crack in an Elastic PlateJournal of Applied Mechanics, 39
-
K. Hayashi, H. Abé (1980)
Stress intensity factors for a semi-elliptical crack in the surface of a semi-infinite solidInternational Journal of Fracture, 16
-
P. Paris, F. Erdogan (1963)
A Critical Analysis of Crack Propagation LawsJournal of Basic Engineering, 85
-
T. Cruse, G. Meyers, Rb Wilson (1977)
Fatigue growth of surface cracksASTM special technical publications
-
W. Brown, J. Srawley (1966)
Plane strain crack toughness testing of high strength metallic materials. -
M. Kawahara, M. Kurihara (2013)
Fatigue Crack Growth from a Surface Flaw -
Smith Smith, Sorensen Sorensen (1976)
The semi‐elliptical surface crack‐a solution by the alternating methodInt. J. Fract., 12
-
Koterazawa Koterazawa, Minamisaka Minamisaka (1977)
Stress intensity factors of semi‐elliptical surface cracks in bendingJ. Soc. Mater. Sci. Jap., 26
-
C. Buchalet, W. Bamford (1976)
Stress Intensity Factor Solutions for Continuous Surface Flaws in Reactor Pressure VesselsASTM special technical publications
-
D. Corn (1971)
A study of cracking techniques for obtaining partial thickness cracks of pre-selected depths and shapesEngineering Fracture Mechanics, 3
-
G. Lloyd, J. Walls (1980)
Propagation of fatigue cracks from surface flaws in austenitic Type4 316 butt weldsEngineering Fracture Mechanics, 13
-
W. Pierce, J. Shannon (1978)
Surface-crack shape change in bending fatigue using an inexpensive resonant fatiguing apparatusJournal of Testing and Evaluation, 6
-
L. Burck (1977)
Fatigue growth of surface cracks in bendingEngineering Fracture Mechanics, 9
-
J. Newman (1973)
Fracture analysis of surface- and through-cracked sheets and plates☆Engineering Fracture Mechanics, 5
-
J. Newman (1979)
A review and assessment of the stress-intensity factors for surface cracks -
LEfflOI Hjnto, R. Hartranft (1973)
Alternating method applied to edge and surface crack problems -
F. Smith, A. Emery, A. Kobayashi (1967)
Stress Intensity Factors for Semicircular Cracks: Part 2—Semi-Infinite SolidJournal of Applied Mechanics, 34
-
A. Kobayashi, A. Emery, N. Polvanich, W. Love (1977)
Surface flaw in a pressurised and thermally-shocked hollow cylinderInternational Journal of Pressure Vessels and Piping, 5
-
S. Holdbrook, W. Dover (1979)
The stress intensity factor for a deep surface crack in a finite plateEngineering Fracture Mechanics, 12
-
L. Hodulak, H. Kordisch, S. Kunzelmann, E. Sommer (1979)
Growth of Part-Through Cracks -
A. Grandt, G. Sinclair (1971)
STRESS INTENSITY FACTORS FOR SURFACE CRACKS IN BENDING -
G. Irwin (1962)
Crack-Extension Force for a Part-Through Crack in a PlateJournal of Applied Mechanics, 29
-
I. Raju, J. Newman (1979)
Stress-intensity factors for a wide range of semi-elliptical surface cracks in finite-thickness platesEngineering Fracture Mechanics, 11
-
Kobayashi Kobayashi, Emery Emery, Polvanich Polvanich, Love Love (1977)
Inner and outer cracks in internally pressurized cylindersInt. J. Pressure Vessels Piping, 5
-
F. Cesari, T. Hellen (1979)
Evaluation of stress intensity factors for internally pressurised cylinders with surface flawsInternational Journal of Pressure Vessels and Piping, 7
-
R. Shah, A. Kobayashi (1973)
Stress intensity factors for an elliptical crack approaching the surface of a semi-infinite solidInternational Journal of Fracture, 9
-
J. Heliot, R. Labbens, A. Pellissier-Tanon (1979)
Semi-Elliptical Cracks in a Cylinder Subjected to Stress Gradients -
G. Chell (1976)
The stress intensity factors for part through thickness embedded and surface flaws subject to a stress gradientEngineering Fracture Mechanics, 8
- Publisher
- Wiley
- Copyright
- Copyright © 1981 Wiley Subscription Services, Inc., A Wiley Company
- ISSN
- 8756-758X
- eISSN
- 1460-2695
- DOI
- 10.1111/j.1460-2695.1981.tb01127.x
- Publisher site
- See Article on Publisher Site
Abstract
Several crack tip stress intensity factor solutions have been published for semi‐elliptic, surface breaking cracks in plates subjected to tension or bending forces. These solutions do not agree with each other particularly well and the basis for choosing which one is the best has not been established. In this paper, the development of fatigue crack shape is used as a diagnostic tool to test the accuracy of these theoretical stress intensity solutions in predictive fatigue crack growth calculations. Those solutions giving the best engineering estimate of crack tip stress intensity factors are identified. Single equations are also given for each loading case at the deepest point or surface intersection point of semi‐elliptic cracks in order to facilitate calculations on programmable calculators. A rational basis for calculating the progress of a crack which snaps through the thickness and continues to propagate in a stable way by fatigue is suggested.
Journal
Fatigue & Fracture of Engineering Materials and Structures – Wiley
Published: Oct 1, 1981