M. Rahman, A. Kumar, M. Salam (2002)
Experimental Evaluation on the Effect of Minimal Quantities of Lubricant in MillingInternational Journal of Machine Tools & Manufacture, 42
R. Komanduri, B. Turkovich (1981)
New observations on the mechanism of chip formation when machining titanium alloysWear, 69
H. Tönshoff, E. Brinksmeier (1980)
Determination of the Mechanical and Thermal Influences on Machined Surfaces by Microhardness and Residual Stress AnalysisCIRP Annals, 29
H. Sasahara, T. Obikawa, T. Shirakashi (2004)
Prediction model of surface residual stress within a machined surface by combining two orthogonal plane modelsInternational Journal of Machine Tools & Manufacture, 44
(2008)
Size effect in machining and its influence on product sustainability
D. Axinte, R. Dewes (2002)
Surface integrity of hot work tool steel after high speed milling-experimental data and empirical modelsJournal of Materials Processing Technology, 127
B. Subhas, R. Bhat, K. Ramachandra, H. Balakrishna (2000)
Simultaneous Optimization of Machining Parameters for Dimensional Instability Control in Aero Gas Turbine Components Made of Inconel 718 AlloyJournal of Manufacturing Science and Engineering-transactions of The Asme, 122
Xiaoping Yang, C. Liu (2002)
A new stress-based model of friction behavior in machining and its significant impact on residual stresses computed by finite element methodInternational Journal of Mechanical Sciences, 44
S. Jeelani, S. Biswas, R. Natarajan (1986)
Effect of cutting speed and tool rake angle on residual stress distribution in machining 2024-T351 aluminium alloy — unlubricated conditionsJournal of Materials Science, 21
D. Lucca, E. Brinksmeier, G. Goch (1998)
Progress in Assessing Surface and Subsurface IntegrityCIRP Annals, 47
H. Tönshoff, C. Arendt, R. Amor (2000)
Cutting of Hardened SteelCIRP Annals, 49
M. Marqués, J. Outeiro, A. Dias, R. M'Saoubi, H. Chandrasekaran (2006)
Surface Integrity of H13 ESR Mould Steel Milled by Carbide and CBN ToolsMaterials Science Forum, 514-516
M. Nasr, E. Ng, M. Elbestawi (2007)
Effects of workpiece thermal properties on machining-induced residual stresses - thermal softening and conductivityProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 221
(2007)
A hybrid predictive model for cyclic curled chip formation with serrations in machining using topological properties
(2006)
Total life-cycle considerations in product design for manufacture: a framework for comprehensive evaluation, (Keynote Paper)
E. Ezugwu, Z. Wang, C. Okeke (1999)
Tool Life and Surface Integrity When Machining Inconel 718 With PVD- and CVD-Coated ToolsTribology Transactions, 42
W. Konig, Mordechai Klinger, R. Link (1990)
Machining hard materials with geometrically defined cutting edges
W. Grzesik (2008)
Machining of Hard Materials
P. Prevéy, D. Hombach, P. Mason (1998)
Thermal Residual Stress Relaxation and Distortion in Surface Enhanced Gas Turbine Engine Components
M. El-Axir (2002)
A method of modeling residual stress distribution in turning for different materialsInternational Journal of Machine Tools & Manufacture, 42
G. Poulachon, A. Albert, M. Schluraff, I. Jawahir (2005)
An experimental investigation of work material microstructure effects on white layer formation in PCBN hard turningInternational Journal of Machine Tools & Manufacture, 45
W. König, A. Berktold, K. Koch (1993)
Turning versus grinding: a comparison of surface integrity aspects and attainable accuraciesCIRP Annals, 42
(1996)
Advanced materials means advanced engines
B. Subhas, R. Bhat, K. Ramachandra, H. Balakrishna (2000)
Dimensional instability studies in machining of Inconel 718 nickel based superalloy as applied to aerogas turbine componentsJournal of Engineering for Gas Turbines and Power-transactions of The Asme, 122
Farhat Ghanem, H. Sidhom, C. Braham, Michael Fitzpatrick (2002)
Effect of near-surface residual stress and microstructure modification from machining on the fatigue endurance of a tool steelJournal of Materials Engineering and Performance, 11
R. M'Saoubi, H. Chandrasekaran (2004)
Role of phase and grain size on chip formation and material work hardening during machining of single and dual phase steelsIronmaking & Steelmaking, 31
H. Chandrasekaran, R. M'Saoubi, B. Högman, L. Nordh, B. Coulon, J. Lebrun, D. Viale, S. Gitton, M. Montero, M. Marqués, J. Outeiro, A. Dias (2005)
Development of machinability enhanced tool steels for improved product economy in hard millingEuropace
C. Liu, M. Barash (1976)
The Mechanical State of the Sublayer of a Surface Generated by Chip-Removal Process—Part 1: Cutting With a Sharp ToolJournal of Engineering for Industry, 98
M. Umino, T. Sera, Y. Ikenaga, Y. Okada, R. Murakami, Shigeharu Tubakino (2004)
Role of alloying elements on machinability of plastic-molding steelsInternational Journal of Materials Research, 95
R. Arunachalam, M. Mannan, A. Spowage (2004)
Residual stress and surface roughness when facing age hardened Inconel 718 with CBN and ceramic cutting toolsInternational Journal of Machine Tools & Manufacture, 44
J. Outeiro, A. Dias, J. Lebrun (2004)
Experimental Assessment of Temperature Distribution in Three-Dimensional Cutting ProcessMachining Science and Technology, 8
L. Colwell, M. Sinnott, J. Tobin (1955)
The Determination of Residual Stresses in Hardened, Ground SteelJournal of Fluids Engineering
F. Taricco (1995)
Effect of Machining and Shot Peening on the Residual Stresses of Superalloy Turbine Discs
S. Jeelani, M. Musiał (1986)
A study of cumulative fatigue damage in AISI 4130 steelJournal of Materials Science, 21
G. Poulachon, A. Moisan, I. Jawahir (2001)
Evaluation of Chip Morphology in Hard Turning Using Constitutive Models and Material Property DataManufacturing Engineering
Y. Matsumoto, M. Barash, C. Liu (1986)
Effect of Hardness on the Surface Integrity of AISI 4340 SteelJournal of Engineering for Industry, 108
Ramanathan Arunachalam, M. Mannan (2000)
MACHINABILITY OF NICKEL-BASED HIGH TEMPERATURE ALLOYSMachining Science and Technology, 4
R. Rentsch, I. Inasaki (1995)
Investigation of Surface Integrity by Molecular Dynamics SimulationCIRP Annals, 44
S. Akcan, Wi. Shah, S. Moylan, S. Chandrasekar, P. Chhabra, H. Yang (2002)
Formation of white layers in steels by machining and their characteristicsMetallurgical and Materials Transactions A, 33
A. Simoneau, E. Ng, M. Elbestawi (2007)
Grain size and orientation effects when microcutting AISI 1045 steelCirp Annals-manufacturing Technology, 56
M. Vosough, Ping Liu, I. Svenningsson (2005)
Depth Profile of Titanium Alloy (Ti-6Al-4V) and Residual Stress Measured by Using X-Ray Diffraction after Metal Cutting Assisted by High-Pressured Jet Cooling Evaluation of Etching Methods: ION Beam (EDOS) and Electro-Chemical EtchingMaterials Science Forum, 490-491
E. Brinksmeier, H. Tönshoff (1985)
X-Ray Stress Measurement — a Tool for the Study and Layout of Machining ProcessesCIRP Annals, 34
S. Ekinović, S. Dolinsek, I. Jawahir (2004)
Some Observations of the Chip Formation Process and the White Layer Formation in High Speed Milling of Hardened SteelMachining Science and Technology, 8
P. Mativenga, K. Hon (2003)
A study of cutting forces and surface finish in high-speed machining of AISI H13 tool steel using carbide tools with TiAIN based coatingsProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 217
A. Sherry (2007)
Advances and Challenges in Structural IntegrityApplied Mechanics and Materials, 7-8
R. M'Saoubi, J. Outeiro, B. Changeux, J. Lebrun, A. Dias (1999)
Residual stress analysis in orthogonal machining of standard and resulfurized AISI 316L steelsJournal of Materials Processing Technology, 96
P. Dahlman, F. Gunnberg, M. Jacobson (2004)
The influence of rake angle, cutting feed and cutting depth on residual stresses in hard turningJournal of Materials Processing Technology, 147
(2002)
Machinability of martensitic steels in milling and the role of hardness
J. Outeiro, D. Umbrello, R. M'Saoubi (2006)
Experimental and numerical modelling of the residual stresses induced in orthogonal cutting of AISI 316L steelInternational Journal of Machine Tools & Manufacture, 46
H. Sasahara (2005)
The effect on fatigue life of residual stress and surface hardness resulting from different cutting conditions of 0.45%C steelInternational Journal of Machine Tools & Manufacture, 45
P. Prevéy, P. Mason, D. Hornbach, J. Molkenthin (1996)
Effect of prior machining deformation on the development of tensile residual stresses in weld-fabricated nuclear componentsJournal of Materials Engineering and Performance, 5
P. Prevéy (1976)
A METHOD OF DETERMINING THE ELASTIC PROPERTIES OF ALLOYS IN SELECTED CRYSTALLOGRAPHIC DIRECTIONS FOR X-RAY DIFFRACTION RESIDUAL STRESS MEASUREMENTAdvances in x-ray analysis, 20
I. Jaafar, A. Venkatachalam, K. Joshi, A. Ungureanu, N. Silva, K. Rouch, O. Dillon, I. Jawahir (2007)
Product Design for Sustainability: A New Assessment Methodology and Case Studies
G. Poulachon, A. Moisan, I. Jawahir (2001)
On modelling the influence of thermo-mechanical behavior in chip formation during hard turning of 100Cr6 bearing steelCIRP Annals, 50
Y. Guo, C. Liu (2002)
FEM ANALYSIS OF MECHANICAL STATE ON SEQUENTIALLY MACHINED SURFACESMachining Science and Technology, 6
(2006)
A New methodology for transforming 3R concept into 6R concept for improved product sustainability
C. Becze, P. Clayton, L. Chen, T. El-Wardany, M. Elbestawi (2000)
High-speed five-axis milling of hardened tool steelInternational Journal of Machine Tools & Manufacture, 40
A. Sadat, J. Bailey (1986)
Some observations on surface damage during machining of a bearing bronzeWear, 108
Y. Matsumoto, F. Hashimoto, G. Lahoti (1999)
Surface Integrity Generated by Precision Hard TurningCirp Annals-manufacturing Technology, 48
L. Chuzhoy, R. DeVor, S. Kapoor, D. Bammann (2001)
Microstructure-Level Modeling of Ductile Iron MachiningManufacturing Engineering
R. Arunachalam, M. Mannan, A. Spowage (2004)
Surface integrity when machining age hardened Inconel 718 with coated carbide cutting toolsInternational Journal of Machine Tools & Manufacture, 44
C. Ungureanu, S. Das, I. Jawahir (2007)
Development of a Sustainability Scoring Method for Manufactured Automotive Products: A Case Study of Auto Body Panels
(1998)
Burnishing Method and Apparatus for Providing a Layer of Compressive Residual Stress in the Surface of a Workpiece
A. Sharman, D. Aspinwall, R. Dewes, D. Clifton, P. Bowen (2001)
The effects of machined workpiece surface integrity on the fatigue life of γ-titanium aluminideInternational Journal of Machine Tools & Manufacture, 41
E. Bradley (1988)
Superalloys: a technical guide
E. Ezugwu (2005)
Key improvements in the machining of difficult-to-cut aerospace superalloysInternational Journal of Machine Tools & Manufacture, 45
M. Umino, T. Sera, Y. Okada, Daisuke Murakami, R. Murakami, Harushige Tubakino (2003)
Effect of Silicon Content and Lubricant on the Machinability of Hot Working Tool SteelTetsu To Hagane-journal of The Iron and Steel Institute of Japan, 89
H. Chandrasekaran, R. M'Saoubi (2006)
Improved Machinability in Hard Milling and Strategies for Steel DevelopmentCIRP Annals, 55
A. Sadat, M. Reddy (1993)
Surface integrity of inconel-718 nickel-base superalloy using controlled and natural contact length tools. Part II: UnlubricatedExperimental Mechanics, 33
D. Novovic, R. Dewes, D. Aspinwall, W. Voice, P. Bowen (2004)
The effect of machined topography and integrity on fatigue lifeInternational Journal of Machine Tools & Manufacture, 44
R. Field, John'I Canmet (2005)
A Review of Measuring Methods for Surface Integrity
A. Sadat, M. Reddy (1992)
Surface integrity of inconel-718 nickel-base superalloy using controlled and natural contact length tools. part I: LubricatedExperimental Mechanics, 32
Jeffrey Thiele, S. Melkote, R. Peascoe, T. Watkins (1999)
Effect of Cutting-Edge Geometry and Workpiece Hardness on Surface Residual Stresses in Finish Hard Turning of AISI 52100 SteelManufacturing Science and Engineering
A. Simoneau, E. Ng, M. Elbestawi (2006)
Surface defects during microcuttingInternational Journal of Machine Tools & Manufacture, 46
Mahmudur Rahman, Y. Wong, A. Zareena (2003)
Machinability of titanium alloysJsme International Journal Series C-mechanical Systems Machine Elements and Manufacturing, 46
M. Salio, T. Berruti, G. Poli (2006)
Prediction of residual stress distribution after turning in turbine disksInternational Journal of Mechanical Sciences, 48
A. Sharman, J. Hughes, K. Ridgway (2006)
An analysis of the residual stresses generated in Inconel 718™ when turningJournal of Materials Processing Technology, 173
A. Vyas, M. Shaw (2000)
THE SIGNIFICANCE OF THE WHITE LAYER IN A HARD TURNED STEEL CHIPMachining Science and Technology, 4
A. Mantle, D. Aspinwall (1997)
Surface integrity and fatigue life of turned gamma titanium aluminideJournal of Materials Processing Technology, 72
C. Che-Haron, A. Jawaid (2005)
The effect of machining on surface integrity of titanium alloy Ti–6% Al–4% VJournal of Materials Processing Technology, 166
E. Brinksmeier, J. Cammett, W. König, P. Leskovar, J. Peters, H. Tönshoff (1982)
Residual Stresses — Measurement and Causes in Machining ProcessesCIRP Annals, 31
B. Griffiths (2001)
Manufacturing surface technology : surface integrity & functional performance
(1971)
Review of surface integrity of machined components
S. Jeelani, J. Bailey (1986)
Residual Stress Distribution in Machining Annealed 18 Percent Nickel Maraging SteelJournal of Engineering Materials and Technology-transactions of The Asme, 108
S. Liang, J. Su (2007)
Residual Stress Modeling in Orthogonal MachiningCirp Annals-manufacturing Technology, 56
P. Prevéy, J. Cammett (2004)
The Influence of Surface Enhancement by Low Plasticity Burnishing on the Corrosion Fatigue Performance of AA7075-T6International Journal of Fatigue, 26
A. Ramesh, S. Melkote, L. Allard, L. Riester, T. Watkins (2005)
Analysis of white layers formed in hard turning of AISI 52100 steelMaterials Science and Engineering A-structural Materials Properties Microstructure and Processing, 390
H. Sasahara, T. Obikawa, T. Shirakashi (1996)
FEM analysis of cutting sequence effect on mechanical characteristics in machined layerJournal of Materials Processing Technology, 62
J. Bailey, S. Jeelani (1976)
Determination of subsurface plastic strain in machining using an embossed gridWear, 36
F. Klocke, E. Brinksmeier, K. Weinert (2005)
Capability Profile of Hard Cutting and Grinding ProcessesCIRP Annals, 54
E. Henriksen (1951)
Residual Stresses in Machined SurfacesJournal of Fluids Engineering
E. Capello (2005)
Residual stresses in turning: Part I: Influence of process parametersJournal of Materials Processing Technology, 160
A. Mantle, D. Aspinwall (2001)
Surface integrity of a high speed milled gamma titanium aluminideJournal of Materials Processing Technology, 118
E. Brinksmeier, E. Schneider, W. Theiner, H. Tönshoff (1984)
Nondestructive Testing for Evaluating Surface IntegrityCIRP Annals, 33
G. Poulachon, B. Bandyopadhyay, I. Jawahir, S. Pheulpin, Emmanuel Seguin (2003)
The influence of the microstructure of hardened tool steel workpiece on the wear of PCBN cutting toolsInternational Journal of Machine Tools & Manufacture, 43
R. Komanduri (1982)
Some clarifications on the mechanics of chip formation when machining titanium alloysWear, 76
Kurt Jacobus, R. DeVor, S. Kapoor, R. Peascoe (2001)
Predictive model for the full biaxial surface and subsurface residual stress profiles from turningJournal of Manufacturing Science and Engineering-transactions of The Asme, 123
M. Shaw, A. Vyas (1993)
Chip Formation in the Machining of Hardened SteelCirp Annals-manufacturing Technology, 42
D. Aspinwall, R. Dewes, A. Mantle (2005)
The Machining of ?-TiAI Intermetallic AlloysCirp Annals-manufacturing Technology
K. Ee, O. Dillon, I. Jawahir (2005)
Finite element modeling of residual stresses in machining induced by cutting using a tool with finite edge radiusInternational Journal of Mechanical Sciences, 47
D. Dudzinski, A. Devillez, A. Moufki, D. Larrouquere, V. Zerrouki, J. Vigneau (2004)
A review of developments towards dry and high speed machining of Inconel 718 alloyInternational Journal of Machine Tools & Manufacture, 44
M. Jacobson, P. Dahlman, F. Gunnberg (2002)
Cutting speed influence on surface integrity of hard turned bainite steelJournal of Materials Processing Technology, 128
A. Sadat (1987)
Surface region damage of machined inconel-718 nickel-base superalloy using natural and controlled contact length toolsWear, 119
C. Liu, M. Barash (1976)
The Mechanical State of the Sublayer of a Surface Generated by Chip-Removal Process—Part 2: Cutting With a Tool With Flank WearJournal of Engineering for Industry, 98
E. Loria (1988)
The Status and Prospects of Alloy 718JOM, 40
P. Prevéy (1986)
X-RAY DIFFRACTION RESIDUAL STRESS TECHNIQUES
T. Fujii, Y. Matsuda (2003)
Effect of Si Content and Hardness on the Machinability of Hot Working Die Steels, 74
B. Sridhar, G. Devananda, K. Ramachandra, R. Bhat (2003)
Effect of machining parameters and heat treatment on the residual stress distribution in titanium alloy IMI-834Journal of Materials Processing Technology, 139
J. Outeiro, A. Dias, I. Jawahir (2006)
On the Effects of Residual Stresses Induced by Coated and Uncoated Cutting Tools with Finite Edge Radii in Turning OperationsCIRP Annals, 55
H. Sasahara, T. Obikawa, T. Shirakashi (1994)
The Prediction of Effects of Cutting Condition on Mechanical Characteristics in Machined Layer
P. Chevrier, A. Tidu, B. Bolle, P. Cezard, J. Tinnes (2003)
Investigation of surface integrity in high speed end milling of a low alloyed steelInternational Journal of Machine Tools & Manufacture, 43
Durul Ulutan, B. Alaca, I. Lazoglu (2007)
Analytical modelling of residual stresses in machiningJournal of Materials Processing Technology, 183
B. Griffiths (1987)
Mechanisms of White Layer Generation With Reference to Machining and Deformation ProcessesJournal of Tribology-transactions of The Asme, 109
J. Bailey, S. Jeelani, S. Becker (1976)
Surface Integrity in Machining AISI 4340 SteelJournal of Engineering for Industry, 98
D. Umbrello, R. M'Saoubi, J. Outeiro (2007)
The influence of Johnson–Cook material constants on finite element simulation of machining of AISI 316L steelInternational Journal of Machine Tools & Manufacture, 47
B. Rao, Y. Shin (2001)
Analysis on high-speed face-milling of 7075-T6 aluminum using carbide and diamond cuttersInternational Journal of Machine Tools & Manufacture, 41
C. Liu, M. Barash (1982)
Variables Governing Patterns of Mechanical Residual Stress in a Machined SurfaceJournal of Engineering for Industry, 104
J. Hua, D. Umbrello, R. Shivpuri (2006)
Investigation of cutting conditions and cutting edge preparations for enhanced compressive subsurface residual stress in the hard turning of bearing steelJournal of Materials Processing Technology, 171
C. Schlauer, R. Peng, M. Odén (2002)
Residual Stresses in a Nickel-Based Superalloy Introduced by TurningMaterials Science Forum, 404-407
E. Brinksmeier (1989)
State-of-the-art of non-destructive measurement of sub-surface material properties and damagesPrecision Engineering-journal of The International Societies for Precision Engineering and Nanotechnology, 11
M. Nasr, E. Ng, M. Elbestawi (2007)
Modelling the effects of tool-edge radius on residual stresses when orthogonal cutting AISI 316LInternational Journal of Machine Tools & Manufacture, 47
J. Hua, R. Shivpuri, Xiao-Yin Cheng, V. Bedekar, Y. Matsumoto, F. Hashimoto, T. Watkins (2005)
Effect of feed rate, workpiece hardness and cutting edge on subsurface residual stress in the hard turning of bearing steel using chamfer + hone cutting edge geometryMaterials Science and Engineering A-structural Materials Properties Microstructure and Processing, 394
International Journal of Sustainable Manufacturing – Unpaywall
Published: Jan 1, 2008
Access the full text.
Sign up today, get DeepDyve free for 14 days.