Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 7-Day Trial for You or Your Team.

Learn More →

Identification of Trap States in Perovskite Solar Cells.

Identification of Trap States in Perovskite Solar Cells. Thermally stimulated current (TSC) measurements are used to characterize electronic trap states in methylammonium lead iodide perovsite solar cells. Several TSC peaks were observed over the temperature range from 20 K to room temperature. To elucidate the origins of these peaks, devices with various organic charge transport layers and devices without transport layers were tested. Two peaks appear at very low temperatures, indicating shallow trap states that are mainly attributed to the PCBM/C60 electron transport bilayer. However, two additional peaks appear at higher temperatures, that is, they are deeper in energy, and are assigned to the perovskite layer. At around T = 163 K, a sharp peak, also present in the dark TSC measurements, is assigned to the orthorhombic-tetragonal phase transition in the perovskite. However, a peak at around T = 191 K is assigned to trap states with activation energies of around 500 meV but with a rather low concentration of 1 × 10(21) m(-3). http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png The Journal of Physical Chemistry Letters Pubmed

Identification of Trap States in Perovskite Solar Cells.

The Journal of Physical Chemistry Letters , Volume 6 (12): -2345 – Oct 21, 2015

Identification of Trap States in Perovskite Solar Cells.


Abstract

Thermally stimulated current (TSC) measurements are used to characterize electronic trap states in methylammonium lead iodide perovsite solar cells. Several TSC peaks were observed over the temperature range from 20 K to room temperature. To elucidate the origins of these peaks, devices with various organic charge transport layers and devices without transport layers were tested. Two peaks appear at very low temperatures, indicating shallow trap states that are mainly attributed to the PCBM/C60 electron transport bilayer. However, two additional peaks appear at higher temperatures, that is, they are deeper in energy, and are assigned to the perovskite layer. At around T = 163 K, a sharp peak, also present in the dark TSC measurements, is assigned to the orthorhombic-tetragonal phase transition in the perovskite. However, a peak at around T = 191 K is assigned to trap states with activation energies of around 500 meV but with a rather low concentration of 1 × 10(21) m(-3).

Loading next page...
 
/lp/pubmed/identification-of-trap-states-in-perovskite-solar-cells-F9ize652C9

References

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

ISSN
1948-7185
DOI
10.1021/acs.jpclett.5b00953
pmid
26266616

Abstract

Thermally stimulated current (TSC) measurements are used to characterize electronic trap states in methylammonium lead iodide perovsite solar cells. Several TSC peaks were observed over the temperature range from 20 K to room temperature. To elucidate the origins of these peaks, devices with various organic charge transport layers and devices without transport layers were tested. Two peaks appear at very low temperatures, indicating shallow trap states that are mainly attributed to the PCBM/C60 electron transport bilayer. However, two additional peaks appear at higher temperatures, that is, they are deeper in energy, and are assigned to the perovskite layer. At around T = 163 K, a sharp peak, also present in the dark TSC measurements, is assigned to the orthorhombic-tetragonal phase transition in the perovskite. However, a peak at around T = 191 K is assigned to trap states with activation energies of around 500 meV but with a rather low concentration of 1 × 10(21) m(-3).

Journal

The Journal of Physical Chemistry LettersPubmed

Published: Oct 21, 2015

There are no references for this article.