Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 7-Day Trial for You or Your Team.

Learn More →

Experimental and numerical analysis of hard turning with multi-chamfered cutting edges

Experimental and numerical analysis of hard turning with multi-chamfered cutting edges http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Journal of Manufacturing Processes CrossRef

Experimental and numerical analysis of hard turning with multi-chamfered cutting edges

Magalhães, F.C.; Ventura, C.E.H.; Abrão, A.M.; Denkena, B.
Journal of Manufacturing Processes , Volume 49: 126-134 – Jan 1, 2020
Download PDF
Loading next page...
 
/lp/crossref/experimental-and-numerical-analysis-of-hard-turning-with-multi-E955AAsfrk

References

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

Publisher
CrossRef
Copyright
© 2019 The Society of Manufacturing Engineers. Published by Elsevier Ltd. All rights reserved.
ISSN
1526-6125
DOI
10.1016/j.jmapro.2019.11.025
Publisher site
See Article on Publisher Site

Abstract

Journal

Journal of Manufacturing Processes – CrossRef

Published: Jan 1, 2020

References

  • On the finite element modelling of high speed hard turning
    Mamalis
  • Modelling of hard part machining
    Ng
  • On modelling the influence of thermo-mechanical behavior in chip formation during hard turning of 100Cr6 bearing steel
    Poulachon
  • Three dimensional finite element simulation of cutting forces and cutting temperature in hard milling of AISI H13 steel
    Zhang
  • Finite element analysis of cutting forces generated in turning process using Deform 3D software
    Parihar
  • Finite element modeling and simulation in dry hard orthogonal cutting AISI D2 tool steel with CBN cutting tool
    Tang
  • A novel hybrid predictive model and validation of unique hook-shaped residual stress profiles in hard turning
    Guo
  • Numerical examination of residual stresses developing during hard turning at different rake angles
    Kundrák
  • Residual stresses computation induced by turning of AISI 4140 steel using 3D simulation based on a mixed approach
    Rami
  • Investigation and FEM-based simulation of tool wear in turning operations with uncoated carbide tools
    Attanasio
  • A finite element analysis of orthogonal machining using different tool edge geometries
    Yen
  • The influence of tool micro-geometry on stress distribution in turning operations of AISI 4140 by FE analysis
    Agmell
  • Effect of tool edge geometry and cutting conditions on experimental and simulated chip morphology in orthogonal hard turning of 100Cr6 steel
    Kountanya
  • Advanced tool edge geometry for high precision hard turning
    Klocke
  • Computational modelling of 3D turning: Influence of edge micro-geometry on forces, stresses, friction and tool wear in PcBN tooling
    Özel
  • Finite element modeling the influence of edge roundness on the stress and temperature fields induced by high-speed machining
    Özel
  • Investigation of cutting conditions and cutting edge preparations for enhanced compressive subsurface residual stress in the hard turning of bearing steel
    Hua
  • Influence of different asymmetrical cutting edge microgeometries on surface integrity
    Segebade
  • Customized cutting edge preparation by means of grinding
    Denkena
  • Cutting edge preparation of PCBN inserts by means of grinding and its application in hard turning
    Ventura
  • Influence of the cutting edge preparation method in characteristics and performance of PVD coated carbide inserts in hard turning
    Denkena
  • Influence of cutting edge geometry on tool wear performance in interrupted hard turning
    Ventura