Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 7-Day Trial for You or Your Team.

Learn More →

Biodegradation of polyether polyurethane inner insulation in bipolar pacemaker leads

Biodegradation of polyether polyurethane inner insulation in bipolar pacemaker leads Several bipolar coaxial pacemaker leads, composed of an outer silicone rubber insulation and an inner polyether polyurethane (PEU) insulation, which were explanted due to clinical evidence of electrical dysfunction, were analyzed in this study. Optical microscopy (OM) and scanning electron microscopy (SEM) were used to determine the cause of failure. Attenuated total reflectance‐Fourier transform infrared microscopy (ATR‐FTIR) was used to analyze the PEU insulation for chemical degradation. In all leads, the silicone rubber outer insulation showed no signs of physical damage. Physical damage to the inner PEU insulation was the source of electrical dysfunction. Cracks through the PEU compromised the insulation between the inner and outer conductor coils in the lead. It was observed with SEM that these cracks originated on the outer surface of the inner insulation and progressed inward. ATR‐FTIR analysis showed that the PEU had chemically degraded via oxidation of the ether soft segment. Furthermore, it was revealed that chemical degradation was more advanced on the outer surface of the PEU. It was hypothesized that hydrogen peroxide permeated through the outer silicone insulation and decomposed into hydroxyl radicals that caused the chemical degradation of PEU. The metal in the outer conductor coil catalyzed the decomposition of the hydrogen peroxide. Chemical degradation of the PEU could also have been catalyzed by metal ions created from the corrosion of the metal in the outer conductor coil by hydrogen peroxide. Physical damage probably occurred in regions of the leads that were subjected to a higher hydrogen peroxide concentration from inflammatory cells and high degrees and rates of strain due to intercorporeal movement, including, but not limited to, cardiac movement. Chemical degradation and physical damage probably had a synergistic affect on failure of the insulation, in that as chemical degradation proceeded, the polymer surface became brittle and more susceptible to physical damage. As physical damage proceeded, cracks propagated into the unaffected bulk, exposing it to oxidants. © 2001 John Wiley & Sons, Inc. J Biomed Mater Res (Appl Biomater) 58: 302–307, 2001 http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Journal of Biomedical Materials Research Part A Wiley

Biodegradation of polyether polyurethane inner insulation in bipolar pacemaker leads

Download PDF
6 pages

Loading next page...
 
/lp/wiley/biodegradation-of-polyether-polyurethane-inner-insulation-in-bipolar-D6nlY7yCS9

References (16)

Publisher
Wiley
Copyright
Copyright © 2001 Wiley Subscription Services, Inc., A Wiley Company
ISSN
1549-3296
eISSN
1552-4965
DOI
10.1002/1097-4636(2001)58:3<302::AID-JBM1021>3.0.CO;2-Y
Publisher site
See Article on Publisher Site

Abstract

Several bipolar coaxial pacemaker leads, composed of an outer silicone rubber insulation and an inner polyether polyurethane (PEU) insulation, which were explanted due to clinical evidence of electrical dysfunction, were analyzed in this study. Optical microscopy (OM) and scanning electron microscopy (SEM) were used to determine the cause of failure. Attenuated total reflectance‐Fourier transform infrared microscopy (ATR‐FTIR) was used to analyze the PEU insulation for chemical degradation. In all leads, the silicone rubber outer insulation showed no signs of physical damage. Physical damage to the inner PEU insulation was the source of electrical dysfunction. Cracks through the PEU compromised the insulation between the inner and outer conductor coils in the lead. It was observed with SEM that these cracks originated on the outer surface of the inner insulation and progressed inward. ATR‐FTIR analysis showed that the PEU had chemically degraded via oxidation of the ether soft segment. Furthermore, it was revealed that chemical degradation was more advanced on the outer surface of the PEU. It was hypothesized that hydrogen peroxide permeated through the outer silicone insulation and decomposed into hydroxyl radicals that caused the chemical degradation of PEU. The metal in the outer conductor coil catalyzed the decomposition of the hydrogen peroxide. Chemical degradation of the PEU could also have been catalyzed by metal ions created from the corrosion of the metal in the outer conductor coil by hydrogen peroxide. Physical damage probably occurred in regions of the leads that were subjected to a higher hydrogen peroxide concentration from inflammatory cells and high degrees and rates of strain due to intercorporeal movement, including, but not limited to, cardiac movement. Chemical degradation and physical damage probably had a synergistic affect on failure of the insulation, in that as chemical degradation proceeded, the polymer surface became brittle and more susceptible to physical damage. As physical damage proceeded, cracks propagated into the unaffected bulk, exposing it to oxidants. © 2001 John Wiley & Sons, Inc. J Biomed Mater Res (Appl Biomater) 58: 302–307, 2001

Journal

Journal of Biomedical Materials Research Part A – Wiley

Published: Jan 1, 2001

Keywords: ; ; ;

There are no references for this article.