Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 7-Day Trial for You or Your Team.

Learn More →

A novel prosthetic finger design with high load-carrying capacity

A novel prosthetic finger design with high load-carrying capacity http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Mechanism and Machine Theory CrossRef

A novel prosthetic finger design with high load-carrying capacity

Liu, S.; Van, M.; Chen, Z.; Angeles, J.; Chen, C.
Mechanism and Machine Theory , Volume 156: 104121 – Feb 1, 2021
Download PDF
Loading next page...
 
/lp/crossref/a-novel-prosthetic-finger-design-with-high-load-carrying-capacity-BHcrrIQnDB

References

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

Publisher
CrossRef
Copyright
© 2020 Elsevier Ltd. All rights reserved.
ISSN
0094-114X
DOI
10.1016/j.mechmachtheory.2020.104121
Publisher site
See Article on Publisher Site

Abstract

Journal

Mechanism and Machine Theory – CrossRef

Published: Feb 1, 2021

References

  • Anthropometric data for describing the kinematics of the human hand
    Buchholz
  • Design and development of an underactuated prosthetic hand
    Massa
  • The psychological impact of severe hand injury
    Grob
  • 3D-printed upper limb prostheses: a review
    Ten Kate
  • The mechanical design and experiments of HIT/DLR prosthetic hand
    Huang
  • Upper-limb prosthetics: critical factors in device abandonment
    Biddiss
  • The manus-hand dextrous robotics upper limb prosthesis: mechanical and manipulation aspects
    Pons
  • Biomechatronic design and control of an anthropomorphic artificial hand for prosthetic and robotic applications
    Zollo
  • Design of a multifunctional anthropomorphic prosthetic hand with extrinsic actuation
    Dalley
  • Design and control of underactuated tendon-driven mechanisms
    Ozawa
  • Performance comparison between federica hand and larm hand
    Carbone
  • A multigrasp hand prosthesis for transradial amputees
    Dalley
  • On the design of a mechanically programmable underactuated anthropomorphic prosthetic gripper
    Baril
  • The design of anthropomorphic prosthetic hands: astudy of the Houthampton hand
    Kyberd
  • Optimal design of driving mechanism in a 1-dof anthropomorphic finger
    Rodriguez
  • Design of an underactuated anthropomorphic hand with mechanically implemented postural synergies
    Xu
  • Design and simulation of an underactuated finger mechanism for larm hand
    Ceccarelli
  • Biomechatronic design and control of an anthropomorphic artificial hand for prosthetic applications
    Zhang
  • An overview and comparison of upper limb prosthetics
    van der Riet
  • Effect of flexure hinge type on a 3D printed fully compliant prosthetic finger
    Mutlu
  • Design of fused-deposition ABS components for stiffness and strength
    Rodríguez
  • Evaluating mechanical properties and failure mechanisms of fused deposition modeling acrylonitrile butadiene styrene parts
    Uddin
  • Theoretical joint load analysis of a novel prosthetic digit design
    Liu
  • Is it finger or wrist dexterity that is missing in current hand prostheses?
    Montagnani
  • Design and preliminary evaluation of a 3-dof powered prosthetic wrist device
    Bajaj