Access the full text.
Sign up today, get DeepDyve free for 14 days.
Loading next page...
/lp/wiley/rapid-finite-element-evaluation-of-the-averaged-strain-energy-density-6K6tqnQOaw
References (46)
-
T. Fett, G. Rizzi, H. Bahr (2006)
Green¿s functions for the T-stress of small kink and fork cracksEngineering Fracture Mechanics, 73
-
P. Lazzarin, R. Zambardi (2001)
A finite-volume-energy based approach to predict the static and fatigue behavior of components with sharp V-shaped notchesInternational Journal of Fracture, 112
-
J. Rice (1974)
Limitations to the small scale yielding approximation for crack tip plasticityJournal of The Mechanics and Physics of Solids, 22
-
F. Berto, A. Campagnolo, P. Lazzarin (2015)
Fatigue strength of severely notched specimens made of Ti–6Al–4V under multiaxial loadingFatigue & Fracture of Engineering Materials & Structures, 38
-
F. Berto, P. Lazzarin, J. Yates (2011)
Multiaxial fatigue of V-notched steel specimens: a non-conventional application of the local energy methodFatigue & Fracture of Engineering Materials & Structures, 34
-
H. Nisitani, T. Teranishi (2004)
KI of a circumferential crack emanating from an ellipsoidal cavity obtained by the crack tip stress method in FEMEngineering Fracture Mechanics, 71
-
B. Gross, A. Mendelson (1972)
Plane elastostatic analysis of V-notched platesInternational Journal of Fracture Mechanics, 8
-
G. Meneghetti, A. Campagnolo, F. Berto (2015)
Fatigue strength assessment of partial and full‐penetration steel and aluminium butt‐welded joints according to the peak stress methodFatigue & Fracture of Engineering Materials & Structures, 38
-
A. Griffith
The Phenomena of Rupture and Flow in SolidsPhilosophical Transactions of the Royal Society A, 221
-
D. Smith, M. Ayatollahi, M. Pavier (2001)
The role of T-stress in brittle fracture for linear elastic materials under mixed-mode loadingFatigue & Fracture of Engineering Materials & Structures, 24
-
(1939)
Bearing pressures and cracks -
W. Carpenter (1985)
The eigenvector solution for a general corner or finite opening crack with further studies on the collocation procedureInternational Journal of Fracture, 27
-
F. Berto, P. Lazzarin (2014)
Recent developments in brittle and quasi-brittle failure assessment of engineering materials by means of local approachesMaterials Science & Engineering R-reports, 75
-
P. Lazzarin, F. Berto, M. Zappalorto (2010)
Rapid calculations of notch stress intensity factors based on averaged strain energy density from coarse meshes: Theoretical bases and applicationsInternational Journal of Fatigue, 32
-
M. Ayatollahi, M. Nejati (2011)
An over‐deterministic method for calculation of coefficients of crack tip asymptotic field from finite element analysisFatigue & Fracture of Engineering Materials & Structures, 34
-
K. Ramesh, Shiven Gupta, A. Srivastava (1996)
Equivalence of multi-parameter stress field equations in fracture mechanicsInternational Journal of Fracture, 79
-
M. Williams, Calif Pasadena (1956)
On the Stress Distribution at the Base of a Stationary Crack -
F. Berto, P. Lazzarin (2013)
Multiparametric full-field representations of the in-plane stress fields ahead of cracked components under mixed mode loadingInternational Journal of Fatigue, 46
-
K. Ramesh, S. Gupta, A. Kelkar (1997)
Evaluation of stress field parameters in fracture mechanics by photoelasticity—RevisitedEngineering Fracture Mechanics, 56
-
Q. Xiao, B. Karihaloo, X. Liu (2004)
Direct determination of SIF and higher order terms of mixed mode cracks by a hybrid crack elementInternational Journal of Fracture, 125
-
A. Torabi, A. Campagnolo, F. Berto (2015)
Experimental and theoretical investigation of brittle fracture in key-hole notches under mixed mode I/II loadingActa Mechanica, 226
-
M. Haddad, T. Topper, K. Smith (1979)
Prediction of non propagating cracksEngineering Fracture Mechanics, 11
-
Irwin (1957)
Analysis of stresses and strains near the end of a crack traversing a plateJ. Appl. Mech., 24
-
G. Meneghetti, A. Campagnolo, F. Berto, B. Atzori (2015)
Averaged strain energy density evaluated rapidly from the singular peak stresses by FEM: cracked components under mixed-mode (I + II) loadingTheoretical and Applied Fracture Mechanics, 79
-
D. Radaj (2010)
T‐stress corrected notch stress intensity factors with application to welded lap jointsFatigue & Fracture of Engineering Materials & Structures, 33
-
Q. Xiao, B. Karihaloo (2007)
An overview of a hybrid crack element and determination of its complete displacement fieldEngineering Fracture Mechanics, 74
-
S. Larsson, A. Carlsson (1973)
Influence of non-singular stress terms and specimen geometry on small-scale yielding at crack tips in elastic-plastic materialsJournal of The Mechanics and Physics of Solids, 21
-
P. Lazzarin, F. Berto, D. Radaj (2009)
Fatigue‐relevant stress field parameters of welded lap joints: pointed slit tip compared with keyhole notchFatigue & Fracture of Engineering Materials & Structures, 32
-
Y. Chen, X. Lin, Z. Wang (2010)
A rigorous derivation for T-stress in line crack problemEngineering Fracture Mechanics, 77
-
Xin Wang, T. Lewis, R. Bell (2006)
Estimations of the T-stress for small cracks at notchesEngineering Fracture Mechanics, 73
-
P. Lazzarin, Filippo Berto (2005)
From Neuber’s Elementary Volume to Kitagawa and Atzori’s Diagrams: An Interpretation Based on Local EnergyInternational Journal of Fracture, 135
-
F. Berto, P. Lazzarin (2009)
A review of the volume-based strain energy density approach applied to V-notches and welded structuresTheoretical and Applied Fracture Mechanics, 52
-
Y. Chen (2000)
Closed form solutions of T-stress in plane elasticity crack problemsInternational Journal of Solids and Structures, 37
-
G. Meneghetti, C. Guzzella, B. Atzori (2014)
The peak stress method combined with 3D finite element models for fatigue assessment of toe and root cracking in steel welded joints subjected to axial or bending loadingFatigue & Fracture of Engineering Materials & Structures, 37
-
T. Fett, G. Rizzi (2005)
Weight Functions for Stress Intensity Factors and T-Stress for Oblique Cracks in A Half-SpaceInternational Journal of Fracture, 132
-
A. Campagnolo, F. Berto, D. Leguillon (2016)
Fracture assessment of sharp V-notched components under Mode II loading: a comparison among some recent criteria -
M. Ayatollahi, M. Pavier, D. Smith (1998)
Determination of T-stress from finite element analysis for mode I and mixed mode I/II loadingInternational Journal of Fracture, 91
-
G. Meneghetti, C. Guzzella (2014)
The peak stress method to estimate the mode I notch stress intensity factor in welded joints using three-dimensional finite element modelsEngineering Fracture Mechanics, 115
-
M. Ayatollahi, B. Saboori (2015)
T-stress effects in mixed mode I/II/III brittle fractureEngineering Fracture Mechanics, 144
-
T. Fett, D. Munz (2003)
T-stress and crack path stability of DCDC specimensInternational Journal of Fracture, 124
-
M. Williams, Calif Pasadena (1952)
Stress Singularities Resulting From Various Boundary Conditions in Angular Corners of Plates in Extension -
G. Meneghetti (2012)
The use of peak stresses for fatigue strength assessments of welded lap joints and cover plates with toe and root failuresEngineering Fracture Mechanics, 89
-
P. Livieri, P. Lazzarin (2005)
Fatigue strength of steel and aluminium welded joints based on generalised stress intensity factors and local strain energy valuesInternational Journal of Fracture, 133
-
G. Meneghetti, P. Lazzarin (2007)
Significance of the elastic peak stress evaluated by FE analyses at the point of singularity of sharp V-notched componentsFatigue & Fracture of Engineering Materials & Structures, 30
-
F. Erdogan, G. Sih (1963)
On the Crack Extension in Plates Under Plane Loading and Transverse ShearJournal of Basic Engineering, 85
-
Brahtz (1933)
Stress distribution in a reentrant cornerTrans. Am. Soc. Mech Eng., 55
- Publisher
- Wiley
- Copyright
- © 2016 Wiley Publishing Ltd.
- ISSN
- 8756-758X
- eISSN
- 1460-2695
- DOI
- 10.1111/ffe.12439
- Publisher site
- See Article on Publisher Site
Abstract
The strain energy density (SED) averaged over a material dependent control volume has been demonstrated to control fracture and fatigue behaviour of different materials in many engineering design situations. A method to rapidly calculate the averaged SED at the tip of long cracks under in‐plane mixed mode (I + II) loading has been recently proposed. It was based on the peak stresses evaluated from finite element (FE) analyses, according to the peak stress method (PSM). The aim of this work is to extend this FE approach to short cracks. In the present paper short cracks are distinguished from long cracks by considering that the stress fields within the control volume of short cracks are no longer governed solely by the stress intensity factors (SIFs), but the contribution of higher order terms, and primarily the T‐stress, becomes significant to estimate the averaged SED. Therefore the averaged SED is calculated using the linear elastic nodal stresses evaluated by FEM either at the crack tip, to account for the SIF contribution, and at selected FE nodes of the crack free edges, to include the T‐stress contribution. The proposed approach is referred to as nodal stress approach. The advantage of the nodal stress approach is two‐fold: there is no need of mesh refinements in the close neighbourhood of the points of singularity, so that coarse FE meshes can be adopted; moreover, geometrical modelling of the control volume in FE models is no longer necessary. Infinite plates weakened by central small cracks subjected to mixed mode I + II loading and a lap joint geometry have been analysed taking into consideration different crack lengths, mode mixities and average finite element sizes of the employed meshes. A comparison between approximate values of the averaged SED according to the nodal stress approach and those derived directly from the FE strain energy adopting very refined FE meshes has been successfully performed within a range of applicability.
Journal
Fatigue & Fracture of Engineering Materials and Structures – Wiley
Published: Aug 1, 2016
Keywords: ; ; ; ; ;