Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 7-Day Trial for You or Your Team.

Learn More →

Comprehensive papers covering several materials groups

Comprehensive papers covering several materials groups Werkstoffe und Korrosion 37, (1986) Abstr. 2223-2236 R 175 the adhesive/adherent interface. Samples can be loaded in simple or double lap Comprehensive papers covering several materials shear. Specimen can be exposed in any appropriate environment. The initial crack groups/Arbeiten uber mehrere Werkstoffgruppen length. crack extension and crack extension failure mode are a function of adher- end, surface treatment and adhesive primer systems. The wedge test has been used to show correlation between laboratory tests and in-service performance of bonded A1 joints. Tests to select adhesive include shear, T-peel, creep, torsion pendulum, etc. Various test configurations for 2024 alloy and for honeycomb and sandwich materials (7075 skin) are described. 6 ref.-H.B.C. J.A. Marceau, E.W. Thrall. Marcel Dekker, Inc., 270 Madison Ave., New York, New York 10016, USA, 1985. Adhesive Bonding of Aluminum Alloys. (Met.A., 8604.72- 86-2223 Corrosion Properties of Welded CuNiFe/Steel Compounds. II. 01 15) 177-197. [in English]. Corrosion Properties in a Seawater Test Rig in Helgoland. After corrosion tests in an ASTM-seawater loop at 90°C. seawater test rig experiments in Helgo- 86-2230 Stress Corrosion Cracking Studies on Heat Resistant Bolt land were performed on CuNilOFe roll-clad steel compound joint weldings and on Materials for Steam Turbines in Solutions Specific http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Materials and Corrosion/Werkstoffe Und Korrosion Wiley

Comprehensive papers covering several materials groups

Materials and Corrosion/Werkstoffe Und Korrosion , Volume 37 (8) – Aug 1, 1986
Download PDF
3 pages

Loading next page...
 
/lp/wiley/comprehensive-papers-covering-several-materials-groups-1ykLnKU4eP

References (0)

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

Publisher
Wiley
Copyright
"Copyright © 1986 Wiley Subscription Services, Inc., A Wiley Company"
ISSN
0947-5117
eISSN
1521-4176
DOI
10.1002/maco.19860370814
Publisher site
See Article on Publisher Site

Abstract

Werkstoffe und Korrosion 37, (1986) Abstr. 2223-2236 R 175 the adhesive/adherent interface. Samples can be loaded in simple or double lap Comprehensive papers covering several materials shear. Specimen can be exposed in any appropriate environment. The initial crack groups/Arbeiten uber mehrere Werkstoffgruppen length. crack extension and crack extension failure mode are a function of adher- end, surface treatment and adhesive primer systems. The wedge test has been used to show correlation between laboratory tests and in-service performance of bonded A1 joints. Tests to select adhesive include shear, T-peel, creep, torsion pendulum, etc. Various test configurations for 2024 alloy and for honeycomb and sandwich materials (7075 skin) are described. 6 ref.-H.B.C. J.A. Marceau, E.W. Thrall. Marcel Dekker, Inc., 270 Madison Ave., New York, New York 10016, USA, 1985. Adhesive Bonding of Aluminum Alloys. (Met.A., 8604.72- 86-2223 Corrosion Properties of Welded CuNiFe/Steel Compounds. II. 01 15) 177-197. [in English]. Corrosion Properties in a Seawater Test Rig in Helgoland. After corrosion tests in an ASTM-seawater loop at 90°C. seawater test rig experiments in Helgo- 86-2230 Stress Corrosion Cracking Studies on Heat Resistant Bolt land were performed on CuNilOFe roll-clad steel compound joint weldings and on Materials for Steam Turbines in Solutions Specific

Journal

Materials and Corrosion/Werkstoffe Und Korrosion – Wiley

Published: Aug 1, 1986

There are no references for this article.