The Effects of Orientation of Lumbar Facet Joints on the Facet Joint Contact Forces

The Effects of Orientation of Lumbar Facet Joints on the Facet Joint Contact Forces Study Design.A biomechanical human cadaveric study.Objective.The aim of this study was to measure L2-L3 facet joint contact forces in a flexibility test using thin film electroresistive sensors, and facet joint orientation on computed tomographic (CT) scan images, to examine the effects of orientation of lumbar facet joint on the facet joint contact forces.Summary of Background Data.Biomechanically, the bilateral facet joints play a critical role in maintaining stability of the lumbar spine. The effect of orientation of lumbar facet joints on the contact forces remains unknown.Methods.Eight human cadaveric lumbar spine specimens (L2–L3) were tested by applying a pure moment of ±7.5 Nm in three directions of loading (flexion-extension, lateral bending, and axial rotation) with and without a follower preload of 300 N. The orientation of the lumbar facet joints at the L2-L3 was measured on axial CT scans. Bilateral facet contact forces were measured during flexibility tests using thin film electroresistive sensors (Tekscan 6900).Results.The average total peak facet loads was 66 N in axial rotation, 27 N in extension, and 20 N in lateral bending under a pure moment. Under a pure moment with a follower preload of 300 N, the average total peak facet loads was 53 N in axial rotation, 43 N in extension, and 24 N in lateral bending. The facet joint forces were correlated positively and significantly with the orientation in all directions with and without a compressive follower preload (P < 0.05). In addition, the facet joint contact forces at neutral position with a follower preload were correlated positively with the orientation (rs = 0.759, P = 0.001).Conclusion.This study identified that the greater coronal orientation of lumbar facet joints is, the higher the facet joint contact forces are.Level of Evidence: 3 http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Spine Wolters Kluwer Health

The Effects of Orientation of Lumbar Facet Joints on the Facet Joint Contact Forces

Loading next page...
 
/lp/wolters_kluwer/the-effects-of-orientation-of-lumbar-facet-joints-on-the-facet-joint-lJpVLZRxST
Publisher
Wolters Kluwer Health
Copyright
Copyright © 2018 Wolters Kluwer Health, Inc. All rights reserved.
ISSN
0362-2436
eISSN
1528-1159
D.O.I.
10.1097/BRS.0000000000002290
Publisher site
See Article on Publisher Site

Abstract

Study Design.A biomechanical human cadaveric study.Objective.The aim of this study was to measure L2-L3 facet joint contact forces in a flexibility test using thin film electroresistive sensors, and facet joint orientation on computed tomographic (CT) scan images, to examine the effects of orientation of lumbar facet joint on the facet joint contact forces.Summary of Background Data.Biomechanically, the bilateral facet joints play a critical role in maintaining stability of the lumbar spine. The effect of orientation of lumbar facet joints on the contact forces remains unknown.Methods.Eight human cadaveric lumbar spine specimens (L2–L3) were tested by applying a pure moment of ±7.5 Nm in three directions of loading (flexion-extension, lateral bending, and axial rotation) with and without a follower preload of 300 N. The orientation of the lumbar facet joints at the L2-L3 was measured on axial CT scans. Bilateral facet contact forces were measured during flexibility tests using thin film electroresistive sensors (Tekscan 6900).Results.The average total peak facet loads was 66 N in axial rotation, 27 N in extension, and 20 N in lateral bending under a pure moment. Under a pure moment with a follower preload of 300 N, the average total peak facet loads was 53 N in axial rotation, 43 N in extension, and 24 N in lateral bending. The facet joint forces were correlated positively and significantly with the orientation in all directions with and without a compressive follower preload (P < 0.05). In addition, the facet joint contact forces at neutral position with a follower preload were correlated positively with the orientation (rs = 0.759, P = 0.001).Conclusion.This study identified that the greater coronal orientation of lumbar facet joints is, the higher the facet joint contact forces are.Level of Evidence: 3

Journal

SpineWolters Kluwer Health

Published: Feb 15, 2018

References

You’re reading a free preview. Subscribe to read the entire article.


DeepDyve is your
personal research library

It’s your single place to instantly
discover and read the research
that matters to you.

Enjoy affordable access to
over 18 million articles from more than
15,000 peer-reviewed journals.

All for just $49/month

Explore the DeepDyve Library

Search

Query the DeepDyve database, plus search all of PubMed and Google Scholar seamlessly

Organize

Save any article or search result from DeepDyve, PubMed, and Google Scholar... all in one place.

Access

Get unlimited, online access to over 18 million full-text articles from more than 15,000 scientific journals.

Your journals are on DeepDyve

Read from thousands of the leading scholarly journals from SpringerNature, Elsevier, Wiley-Blackwell, Oxford University Press and more.

All the latest content is available, no embargo periods.

See the journals in your area

DeepDyve

Freelancer

DeepDyve

Pro

Price

FREE

$49/month
$360/year

Save searches from
Google Scholar,
PubMed

Create lists to
organize your research

Export lists, citations

Read DeepDyve articles

Abstract access only

Unlimited access to over
18 million full-text articles

Print

20 pages / month

PDF Discount

20% off