Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Nontoxic replacement for Karl Fischer moisture analysis of plastics

Nontoxic replacement for Karl Fischer moisture analysis of plastics A newly developed automatic moisture analyzer for the plastic molding industry has a detection limit of 10 micrograms of water. Test results are available in three to six minutes. No reagents are used, and instrument setup and calibration takes less than ten minutes. Validation tests show moisture determination accuracy of better than 2% standard error, and precision (coefficient of variation) of 0.5 to 10%. The range of applicability is 10 ppm to 10% moisture. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Journal of Vinyl & Additive Technology Wiley

Nontoxic replacement for Karl Fischer moisture analysis of plastics

Download PDF
4 pages

Loading next page...
 
/lp/wiley/nontoxic-replacement-for-karl-fischer-moisture-analysis-of-plastics-R6ikDd2MyW

References (0)

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

Publisher
Wiley
Copyright
Copyright © 1997 Society of Plastics Engineers
ISSN
1083-5601
eISSN
1548-0585
DOI
10.1002/vnl.10211
Publisher site
See Article on Publisher Site

Abstract

A newly developed automatic moisture analyzer for the plastic molding industry has a detection limit of 10 micrograms of water. Test results are available in three to six minutes. No reagents are used, and instrument setup and calibration takes less than ten minutes. Validation tests show moisture determination accuracy of better than 2% standard error, and precision (coefficient of variation) of 0.5 to 10%. The range of applicability is 10 ppm to 10% moisture.

Journal

Journal of Vinyl & Additive Technology – Wiley

Published: Dec 1, 1997

There are no references for this article.