Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Fiber orientation and mechanical properties of short‐fiber‐reinforced injection‐molded composites: Simulated and experimental results

Fiber orientation and mechanical properties of short‐fiber‐reinforced injection‐molded... A numerical simulation is presented that combines the flow simulation during injection molding with an efficient algorithm for predicting the orientation of short fibers in thin composite parts. Fiber‐orientation state is represented in terms of a second‐order orientation tensor. Fiber‐fiber interactions are modeled by means of an isotropic rotary diffusion. The simulation predicts flow‐aligned fiber orientation (shell region)near the surface with transversely aligned (core region) fibers in the vicinity of the mid‐plane. The effects of part thickness and injection speed on fiber orientation are analyzed. Experimental measurements of fiber orientation in plaque‐shaped parts for three different combinations of cavity thickness and injection speed are reported. It is found that gapwise‐converging flow due to the growing layer of solidified polymer near the walls tends to flow‐align the fibers near the entrance, whereas near the melt front, gapwise‐diverging flow due to the diminishing solid layer tends to lign the fibers transverse to the flow. The effect of this gapwise‐converging‐diverging flow is found to be especially significant for thin parts molded at slower injection speeds, which have a proportionately thicker layer of solidified polymer during the filling process. If the fiber orientation is known, predictions of the anisotropic tensile moduli and thermal‐expansion coefficients of the composite are obtained by using the equations for unidirectional composites and taking an orientation average. These predictions are found to agree reasonably well with corresponding experimental measurements. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Polymer Composites Wiley

Fiber orientation and mechanical properties of short‐fiber‐reinforced injection‐molded composites: Simulated and experimental results

Gupta, Mahesh; Wang, K. K.
Polymer Composites , Volume 14 (5) – Oct 1, 1993
Download PDF
16 pages

Loading next page...
 
/lp/wiley/fiber-orientation-and-mechanical-properties-of-short-fiber-reinforced-lr3Qia6Nbi

References (24)

Publisher
Wiley
Copyright
Copyright © 1993 Society of Plastics Engineers
ISSN
0272-8397
eISSN
1548-0569
DOI
10.1002/pc.750140503
Publisher site
See Article on Publisher Site

Abstract

A numerical simulation is presented that combines the flow simulation during injection molding with an efficient algorithm for predicting the orientation of short fibers in thin composite parts. Fiber‐orientation state is represented in terms of a second‐order orientation tensor. Fiber‐fiber interactions are modeled by means of an isotropic rotary diffusion. The simulation predicts flow‐aligned fiber orientation (shell region)near the surface with transversely aligned (core region) fibers in the vicinity of the mid‐plane. The effects of part thickness and injection speed on fiber orientation are analyzed. Experimental measurements of fiber orientation in plaque‐shaped parts for three different combinations of cavity thickness and injection speed are reported. It is found that gapwise‐converging flow due to the growing layer of solidified polymer near the walls tends to flow‐align the fibers near the entrance, whereas near the melt front, gapwise‐diverging flow due to the diminishing solid layer tends to lign the fibers transverse to the flow. The effect of this gapwise‐converging‐diverging flow is found to be especially significant for thin parts molded at slower injection speeds, which have a proportionately thicker layer of solidified polymer during the filling process. If the fiber orientation is known, predictions of the anisotropic tensile moduli and thermal‐expansion coefficients of the composite are obtained by using the equations for unidirectional composites and taking an orientation average. These predictions are found to agree reasonably well with corresponding experimental measurements.

Journal

Polymer Composites – Wiley

Published: Oct 1, 1993

There are no references for this article.