Access the full text.
Sign up today, get DeepDyve free for 14 days.
Loading next page...
/lp/wiley/effects-of-dynamic-vulcanization-on-the-physical-mechanical-and-SJQyRRYu9i
References (32)
-
Hongsheng Liu, Fengwei Xie, Long Yu, Ling Chen, Lin Li (2009)
Thermal processing of starch-based polymersProgress in Polymer Science, 34
-
(1997)
R . Chandra and R . Rustgi , Polym . Degrad -
Ying Yang, Tsuneo Chiba, H. Saito, Takashi Inoue (1998)
Physical characterization of a polyolefinic thermoplastic elastomerPolymer, 39
-
H. Ismail, Salmah, Nasir (2001)
Dynamic vulcanization of rubberwood-filled polypropylene/natural rubber blendsPolymer Testing, 20
-
K. Reis, J. Pereira, Andrew Smith, C. Carvalho, N. Wellner, I. Yakimets (2008)
Characterization of polyhydroxybutyrate-hydroxyvalerate (PHB-HV)/maize starch blend filmsJournal of Food Engineering, 89
-
L. Avérous, L. Moro, P. Dole, C. Fringant (2000)
Properties of thermoplastic blends: starch-polycaprolactonePolymer, 41
-
R. Mani, M. Bhattacharya (1998)
Properties of injection moulded starch/synthetic polymer blends—III. Effect of amylopectin to amylose ratio in starchEuropean Polymer Journal, 34
-
R. Shi, Zizheng Zhang, Quanyong Liu, Yanming Han, Liqun Zhang, Dafu Chen, W. Tian (2007)
Characterization of citric acid/glycerol co-plasticized thermoplastic starch prepared by melt blendingCarbohydrate Polymers, 69
-
Panu Punnarak, S. Tantayanon, V. Tangpasuthadol (2006)
Dynamic vulcanization of reclaimed tire rubber and high density polyethylene blendsPolymer Degradation and Stability, 91
-
Chi-yuan Huang, Ming-Lih Roan, M. Kuo, Wanjia Lu (2005)
Effect of compatibiliser on the biodegradation and mechanical properties of high-content starch/low-density polyethylene blendsPolymer Degradation and Stability, 90
-
Hua Huang, J. Yang, Xin Liu, Yinxi Zhang (2002)
Dynamically vulcanized ethylene propylene diene terpolymer/nylon thermoplastic elastomersEuropean Polymer Journal, 38
-
W. Ning, Yu Jiugao, Ma Xiaofei, Wu Ying (2007)
The influence of citric acid on the properties of thermoplastic starch/linear low-density polyethylene blendsCarbohydrate Polymers, 67
-
Youping Wu, Qing Qi, Guihua Liang, Liqun Zhang (2006)
A strategy to prepare high performance starch/rubber composites: In situ modification during latex compounding processCarbohydrate Polymers, 65
-
J. Soest, K. Benes, D. Wit, J. Vliegenthart (1996)
The influence of starch molecular mass on the properties of extruded thermoplastic starchPolymer, 37
-
R. Asaletha, M. Kumaran, Sabu Thomas (1999)
Thermoplastic elastomers from blends of polystyrene and natural rubber: morphology and mechanical propertiesEuropean Polymer Journal, 35
-
(2009)
Rivera-Armenta, and F.J. Rodriguez-Gonzalez, Carbohydr -
Zhihong Yang, M. Bhattacharya, U. Vaidya (1996)
Properties of ternary blends of starch and maleated polymers of styrene and ethylene propylene rubberPolymer, 37
-
E. Teixeira, A. Róz, A. Carvalho, A. Curvelo (2007)
The effect of glycerol/sugar/water and sugar/water mixtures on the plasticization of thermoplastic cassava starchCarbohydrate Polymers, 69
-
A. Taguet, M. Huneault, B. Favis (2009)
Interface/morphology relationships in polymer blends with thermoplastic starchPolymer, 50
-
M. Akiba, A. Hashim (1997)
Vulcanization and crosslinking in elastomersProgress in Polymer Science, 22
-
(2009)
Huneault, and B -
C. Nakason, Krungjit Nuansomsri, Azizon Kaesaman, S. Kiatkamjornwong (2006)
Dynamic vulcanization of natural rubber/high-density polyethylene blends: Effect of compatibilization, blend ratio and curing systemPolymer Testing, 25
-
D. Bikiaris, J. Prinos, K. Koutsopoulos, N. Vouroutzis, E. Pavlidou, N. Frangis, C. Panayiotou (1998)
LDPE/plasticized starch blends containing PE-g-MA copolymer as compatibilizerPolymer Degradation and Stability, 59
-
J. Raquez, Y. Nabar, M. Srinivasan, B. Shin, R. Narayan, P. Dubois (2008)
Maleated thermoplastic starch by reactive extrusionCarbohydrate Polymers, 74
-
M. Mondragón, E. Hernández, J. Rivera‐Armenta, F. Rodríguez‐González (2009)
Injection molded thermoplastic starch/natural rubber/clay nanocomposites: Morphology and mechanical propertiesCarbohydrate Polymers, 77
-
X. Ramis, A. Cadenato, J. Salla, J. Morancho, A. Valles, L. Contat, A. Ribes (2004)
Thermal degradation of polypropylene/starch-based materials with enhanced biodegradabilityPolymer Degradation and Stability, 86
-
C. Nakason, A. Worlee, S. Salaeh (2008)
Effect of vulcanization systems on properties and recyclability of dynamically cured epoxidized natural rubber/polypropylene blendsPolymer Testing, 27
-
Jayamol George, K. Varughese, Sabu Thomas (2000)
Dynamically vulcanised thermoplastic elastomer blends of polyethylene and nitrile rubberPolymer, 41
-
R. Chandra, R. Rustgi (1997)
Biodegradation of maleated linear low-density polyethylene and starch blendsPolymer Degradation and Stability, 56
-
S. Godbole, S. Gote, M. Latkar, T. Chakrabarti (2003)
Preparation and characterization of biodegradable poly-3-hydroxybutyrate-starch blend films.Bioresource technology, 86 1
-
H. Ismail, Suryadiansyah (2002)
Thermoplastic elastomers based on polypropylene/natural rubber and polypropylene/recycle rubber blendsPolymer Testing, 21
-
A. Carvalho, M. Zambon, A. Curvelo, A. Gandini (2005)
Thermoplastic starch modification during melt processing: Hydrolysis catalyzed by carboxylic acidsCarbohydrate Polymers, 62
- Publisher
- Wiley
- Copyright
- Copyright © 2012 Society of Plastics Engineers
- ISSN
- 1083-5601
- eISSN
- 1548-0585
- DOI
- 10.1002/vnl.20311
- Publisher site
- See Article on Publisher Site
Abstract
Blending of high density polyethylene (HDPE), natural rubber (NR), and thermoplastic tapioca starch (TPS) have been studied. Two series of samples having 5–30 wt% of TPS were prepared: (a) unvulcanized blends (control) and (b) dynamically vulcanized HDPE/NR/TPS blends. The composition of the HDPE/NR was constant and fixed at a blend ratio of 70/30. Morphology studies by SEM showed that the TPS particles were homogeneously dispersed and well‐embedded in vulcanized HDPE/NR matrix. The SEM micrographs showed agreement with the tensile strength and elongation at break values. Tensile strength improved significanly when the HDPE/NR/TPS blends were vulcanized by using sulfur curative system. The enhancement in tensile properties is attributed to the crosslinking reaction within the NR phase. J. VINYL ADDIT. TECHNOL., 18:192–197, 2012. © 2012 Society of Plastics Engineers
Journal
Journal of Vinyl & Additive Technology – Wiley
Published: Sep 1, 2012