Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

TERNARY NaCl+LiCl+H2O MIXED ELECTROLYTE SYSTEM: DETERMINATION OF ACTIVITY COEFFICIENTS BASED ON POTENTIOMETRIC METHOD

TERNARY NaCl+LiCl+H2O MIXED ELECTROLYTE SYSTEM: DETERMINATION OF ACTIVITY COEFFICIENTS BASED ON... The mean activity coefficients for NaCl in a ternary electrolyte system were determined by the potentiometric method, at 25°C, using a solvent polymeric (PVC) sodium-selective membrane electrode (Na+ ISE), containing N,N′-dibenzyl-N,N′-diphenyl-1,2-phenylenedioxydiacetamide as ionophore, and combined with an Ag/AgCl electrode. The potentiometric measurements were performed at the same ionic strengths in different series of mixed salt solutions, each characterized by a fixed salt molal ratio r (where r = m1/m2 = 1, 10, 50, 100). The nonideal behavior of the ternary NaCl(m1) + LiCl(m2) + H2O electrolyte system was described based on the Pitzer ion-interaction model for mixed salts over the ionic strength ranging from 0.01 up to about 4 mol/kg. Two- and three-particle Pitzer interaction parameters for a mixed electrolyte system were determined based on potentiometric data, and the critical role of potentiometric selectivity coefficient (K 12) of ISE as limiting factor in the potentiometric measurements was analyzed. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Chemical Engineering Communications Taylor & Francis

TERNARY NaCl+LiCl+H2O MIXED ELECTROLYTE SYSTEM: DETERMINATION OF ACTIVITY COEFFICIENTS BASED ON POTENTIOMETRIC METHOD

12 pages

Loading next page...
 
/lp/taylor-francis/ternary-nacl-licl-h2o-mixed-electrolyte-system-determination-of-cW7Prqo4YB

References (18)

Publisher
Taylor & Francis
Copyright
Copyright Taylor & Francis Group, LLC
ISSN
1563-5201
eISSN
0098-6445
DOI
10.1080/00986440701446284
Publisher site
See Article on Publisher Site

Abstract

The mean activity coefficients for NaCl in a ternary electrolyte system were determined by the potentiometric method, at 25°C, using a solvent polymeric (PVC) sodium-selective membrane electrode (Na+ ISE), containing N,N′-dibenzyl-N,N′-diphenyl-1,2-phenylenedioxydiacetamide as ionophore, and combined with an Ag/AgCl electrode. The potentiometric measurements were performed at the same ionic strengths in different series of mixed salt solutions, each characterized by a fixed salt molal ratio r (where r = m1/m2 = 1, 10, 50, 100). The nonideal behavior of the ternary NaCl(m1) + LiCl(m2) + H2O electrolyte system was described based on the Pitzer ion-interaction model for mixed salts over the ionic strength ranging from 0.01 up to about 4 mol/kg. Two- and three-particle Pitzer interaction parameters for a mixed electrolyte system were determined based on potentiometric data, and the critical role of potentiometric selectivity coefficient (K 12) of ISE as limiting factor in the potentiometric measurements was analyzed.

Journal

Chemical Engineering CommunicationsTaylor & Francis

Published: Aug 13, 2007

Keywords: Activity coefficient; Lithium chloride; Pitzer equations; Sodium chloride; Sodium ion-selective electrode

There are no references for this article.