Access the full text.
Sign up today, get DeepDyve free for 14 days.
H. Lipson, H. Steeple (1970)
Interpretation of X-Ray Powder Diffraction Patterns
N. M. Pavlushkin (1961)
Sintered Corundum
A. Galakhov, E. Tsibailo (1997)
Unagglomerated powders for transformation-toughened structural ceramicsRefractories and Industrial Ceramics, 38
V.A. Kryuchkov, A. V. Galakhov (1998)
Sinterability of ceramic powders in the A12O3-ZrO2-Y2O3 system obtained by the method of rapid hardening from the melt as a function of their initial heat treatmentOgneup. Tekh. Keram., 7
A. V. Galakhov, E. V. Tsibailo (1997)
Unagglomerated powders for transformation-hardened structural ceramicsOgneup. Tekh. Keram., 6
A. V. Galakhov, E. V. Tsibailo (1997)
Inhomogeneity of packing in powder compacts and the strength of ceramics obtained from themOgneup. Tekh. Keram., 5
E. Slamovich, F. Lange (1992)
Densification of Large Pores: I, ExprimentsJournal of the American Ceramic Society, 75
S. A. Saltykov (1970)
Stereometric Metallography
M. Yoshimura (1988)
Phase stability of zirconiaAmerican Ceramic Society Bulletin, 67
A. Galakhov, E. Tsibailo (1997)
Inhomogeneity of powder packing in compacts and strength of the ceramics obtainedRefractories and Industrial Ceramics, 38
E. Slamovich, F. Lange (1990)
Densification Behavior of Single‐Crystal and Polycrystalline Spherical Particles of ZirconiaJournal of the American Ceramic Society, 73
Ya. E. Geguzin (1984)
The Physics of Sintering
R. Lang (1962)
Ultrasonic Atomization of LiquidsJournal of the Acoustical Society of America, 34
E. S. Lukin (1996)
Modern high-density oxide ceramics with a controlled microstructure. Part I. Effect of aggregation of oxide powders on the sintering and microstructure of ceramicsOgneup. Tekh. Keram., 1
M. Mendelson (1969)
Average Grain Size in Polycrystalline CeramicsJournal of the American Ceramic Society, 52
R. Coble (1961)
Sintering Crystalline Solids. I. Intermediate and Final State Diffusion ModelsJournal of Applied Physics, 32
A comparative analysis of the sinterability of ultradisperse single-crystal powders of tetragonal zirconia with single-crystal particles and coarser powders of the same composition produced by spray pyrolysis and consisting of polycrystalline particles is conducted. It is shown that despite the comparatively large size of the particles, the efficiencies of the sintering processes of such powders and ultradisperse powders are comparable. The density of the material in the final sintering stage exceeds that of the material obtained from ultradisperse single-crystal powders.
Refractories and Industrial Ceramics – Springer Journals
Published: Nov 21, 2007
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.