Access the full text.
Sign up today, get DeepDyve free for 14 days.
Zhiwei Zhu, Xiaoqin Zhou, Liu Zhiwei, Rongqi Wang, Lei Zhu (2014)
Development of a piezoelectrically actuated two-degree-of-freedom fast tool servo with decoupled motions for micro-/nanomachiningPrecision Engineering-journal of The International Societies for Precision Engineering and Nanotechnology, 38
M. Zhou, H. Zhang, S. Huang, S. Chen, K. Cheng (2011)
Experimental study on the effects of feed rate and tool geometries on tool wear in diamond cutting of sinusoidal microstructured surfacesProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225
M. Petz, R. Tutsch (2005)
Reflection grating photogrammetry: a technique for absolute shape measurement of specular free-form surfaces, 5869
G Park, MT Bement, DA Hartman, RE Smith, CR Farrar (2007)
The use of active materials for machining processes: a reviewInt J Mach Tool Manu 2007, 47
X. Zhang, F. Fang, H. Wang, G. Wei, X. Hu (2009)
Ultra-precision machining of sinusoidal surfaces using the cylindrical coordinate methodJournal of Micromechanics and Microengineering, 19
D. Yu, Y. Wong, G. Hong (2012)
Ductile-Regime Machining for Fast Tool Servo Diamond Turning of Micro-Structured Surfaces on Brittle MaterialsAdvanced Materials Research, 500
Yuan-Liu Chen, W. Gao, Bingfeng Ju, Y. Shimizu, S. Ito (2014)
A measurement method of cutting tool position for relay fabrication of microstructured surfaceMeasurement Science and Technology, 25
Lu Meng (2010)
Fast Tool Servo-based Ultra-precision Diamond Machining of Fresnel Micro-structured Surface and Its Control TechnologyJournal of Mechanical Engineering
B. Bhattacharyya, M. Malapati, J. Munda, A. Sarkar (2007)
Influence of tool vibration on machining performance in electrochemical micro-machining of copperInternational Journal of Machine Tools & Manufacture, 47
Fujing Tian, Z. Yin, Shengyi Li (2016)
A novel long range fast tool servo for diamond turningThe International Journal of Advanced Manufacturing Technology, 86
E. Manske, G. Jäger, T. Hausotte, R. Füßl (2012)
Recent developments and challenges of nanopositioning and nanomeasuring technologyMeasurement Science and Technology, 23
J. Sun, G. Hong, M. Rahman, Y. Wong (2004)
Identification of feature set for effective tool condition monitoring by acoustic emission sensingInternational Journal of Production Research, 42
B. Lee (1999)
Application of the Discrete Wavelet Transform to the Monitoring of Tool Failure in End Milling Using the Spindle Motor CurrentThe International Journal of Advanced Manufacturing Technology, 15
Yong-zhang Wang, Liangji Chen (2005)
A Real-time NURBS Surface Interpolator for 5-axis Surface MachiningChinese Journal of Aeronautics, 18
Meng Xu (2014)
Optimization Design of Compliant Mechanism for Fast Tool Servo Based on the Genetic AlgorithmThe Journal of Information and Computational Science, 11
Shaofei Wu (2016)
Study on an improved algorithm for optimization of PID parametersInt. J. Online Eng., 12
Jose Azzaro, R. Veiga (2015)
Sliding Mode Controller with Neural Network IdentificationIEEE Latin America Transactions, 13
K. Li, X. Chen, X. Chen, Qiang Liu, Huan Zhou (2014)
Study on the Fast Tool Servo (FTS) with the Replaceable Flexible HingeKey Engineering Materials, 625
T. Vorburger, H. Rhee, H. Rhee, T. Renegar, John Song, A. Zheng (2007)
Comparison of optical and stylus methods for measurement of surface textureThe International Journal of Advanced Manufacturing Technology, 33
QL Wu (2015)
Error compensation of optical freeform surfaces in fast tool servo diamond turningOpt Precis Eng, 23
Z Zhu, X Zhou, Q Liu, J Lin, S Zhao (2012)
Fabrication of micro-structured surfaces on bulk metallic glasses based on fast tool servo assisted diamond turning. SCIAdv Mater Res, 4
Hua Wang, Xiang Gao (2013)
Auto body taillight assembly modeling and fitting variation induced by tighten‐up sequence analyzingAssembly Automation, 33
Wenjiang Guo, Liping Zhao, C. Tong, Chen I-Ming, S. Joshi (2013)
Adaptive centroid-finding algorithm for freeform surface measurements.Applied optics, 52 10
Yulie Wu, Lingyan Ding, Xiaojun Hu (2011)
An improved phase retrieval algorithm for optical aspheric surface measurementOptics Communications, 284
Qiang Liu, Xiaoqin Zhou, Pengzi Xu, Zhang Xu (2015)
A Two-DOF Fast Tool Servo for Optical Freeform Surfaces Diamond TurningAdvances in Mechanical Engineering, 6
Hong Lu, Deug-Woo Lee, Jong-Man Kim, S. Kim (2014)
Modeling and machining evaluation of microstructure fabrication by fast tool servo-based diamond machiningPrecision Engineering-journal of The International Societies for Precision Engineering and Nanotechnology, 38
D. Neo, A. Kumar, Mustafizur Rahman (2014)
A novel surface analytical model for cutting linearization error in fast tool/slow slide servo diamond turningPrecision Engineering-journal of The International Societies for Precision Engineering and Nanotechnology, 38
周京博 Jing-bo, 孙. Tao, 侯国安 Guo-an (2013)
Optimal design and test of double elastic plate based fast tool servoOptics and Precision Engineering, 21
G. Wang (2011)
Machining Characteristics and Route Planning of Complex Optical Surface by Using Fast Tool ServoJournal of Mechanical Engineering, 47
L. Kong, C. Cheung, Jinbo Jiang, S. To, W. Lee (2011)
Characterization of freeform optics in automotive lighting systems using an Optical–Geometrical Feature Based MethodOptik, 122
X Zhang, F Fang, Y LH, J Liang, Y Guo (2013)
Slow slide servo turning of compound eye lensPrecis Eng, 52
Yung-Tien Liu, Bo-Jheng Li (2014)
Numerical Study of a 3-Axis Stage for Application of Fast Tool ServoKey Engineering Materials, 625
(2017)
r L ' Phase retrieval as an optical metrology tool
Jie Feng, C. Deng, Ting-wen Xing (2013)
Design and location deviation of the computer generated holograms used for aspheric surface testing, 8788
K. Li, X. Chen, X. Chen, Qiang Liu, Huan Zhou (2014)
Study on a Fast Tool Servo (FTS) Driven by Piezoelectric CeramicApplied Mechanics and Materials, 635-637
P. Su, Yuhao Wang, J. Burge, K. Kaznatcheev, M. Idir (2012)
Non-null full field X-ray mirror metrology using SCOTS: a reflection deflectometry approach.Optics express, 20 11
Todd Ashcraft, R. Atac (2012)
Advanced helmet vision system (AHVS) integrated night vision helmet mounted display (HMD), 8383
Zhiwei Zhu, Xiaoqin Zhou, Qiang Liu, Jieqiong Lin, Shaoxin Zhao (2012)
Fabrication of Micro-Structured Surfaces on Bulk Metallic Glasses Based on Fast Tool Servo Assisted Diamond TurningScience of Advanced Materials, 4
Fujing Tian, Z. Yin, Shengyi Li (2014)
Fast axis servo for the fast and precise machining of non-rotational symmetric optics, 9281
Xiao Jun, Xiudong Wei, Zhenwu Lu, Weixing Yu, Hongsheng Wu (2012)
A review of available methods for surface shape measurement of solar concentrator in solar thermal power applicationsRenewable & Sustainable Energy Reviews, 16
M. Kang, Xingsheng Wang, Yong Yang, Xu Zheng (2011)
Study on the Turing of Toric Spectacle Lens by Use of Slow Tool Servo MethodApplied Mechanics and Materials, 52-54
Zhiwei Zhu, Xiaoqin Zhou, Dan Luo, Qiang Liu (2013)
Development of pseudo-random diamond turning method for fabricating freeform optics with scattering homogenization.Optics express, 21 23
G. Park, M. Bement, D. Hartman, Ronald Smith, C. Farrar (2007)
The use of active materials for machining processes : A reviewInternational Journal of Machine Tools & Manufacture, 47
L. Kong, C. Cheung, T. Kwok (2014)
Theoretical and experimental analysis of the effect of error motions on surface generation in fast tool servo machiningPrecision Engineering-journal of The International Societies for Precision Engineering and Nanotechnology, 38
R. Johnston, John Tamkin (2013)
Comparison of CGH Testing To CMM Point Cloud Measurements for Freeform Surfaces
Ho-Sang Kim, Eui-Jung Kim, Byung-suk Song (2004)
Diamond turning of large off-axis aspheric mirrors using a fast tool servo with on-machine measurementJournal of Materials Processing Technology, 146
Haitao Liu, Yazhou Sun, B. Zhu, Yuan Hu, W. Xie (2014)
Inertial force control and balance error analysis of fast tool servo based on the voice coil motor2014 20th International Conference on Automation and Computing
Gan Sze-Wei, Lim Han-Seok, Mustafizur Rahman, F. Watt (2007)
A fine tool servo system for global position error compensation for a miniature ultra-precision latheInternational Journal of Machine Tools & Manufacture, 47
K. Garrard, Thomas Bruegge, J. Hoffman, T. Dow, A. Sohn (2005)
Design tools for freeform optics, 5874
Aaron Mazzeo, A. Stein, D. Trumper, R. Hocken (2009)
Atomic force microscope for accurate dimensional metrologyPrecision Engineering-journal of The International Societies for Precision Engineering and Nanotechnology, 33
Dan Wu, Ken Chen (2014)
Limit cycle analysis of active disturbance rejection control system with two nonlinearities.ISA transactions, 53 4
Zixin Zhao, Hong Zhao, Feifei Gu, Lu Zhang (2013)
Lateral location error compensation algorithm for measuring aspheric surfaces by sub-aperture stitching interferometry, 8788
D. Yu, G. Hong, Y. Wong (2012)
Profile error compensation in fast tool servo diamond turning of micro-structured surfacesInternational Journal of Machine Tools & Manufacture, 52
L. Kong, C. Cheung, W. Lee (2016)
A theoretical and experimental investigation of orthogonal slow tool servo machining of wavy microstructured patterns on precision rollersPrecision Engineering-journal of The International Societies for Precision Engineering and Nanotechnology, 43
X. Yin, Liping Zhao, Xiang Li, Z. Fang (2009)
Automatic centroid detection and surface measurement with a digital Shack–Hartmann wavefront sensorMeasurement Science and Technology, 21
J. Raja, B. Muralikrishnan, Shengyu Fu (2002)
Recent advances in separation of roughness, waviness and formPrecision Engineering-journal of The International Societies for Precision Engineering and Nanotechnology, 26
Chi-Ying Lin, Po-Ying Chen (2011)
Precision tracking control of a biaxial piezo stage using repetitive control and double-feedforward compensationMechatronics, 21
(2005)
Frequency domain analysis of surface figure fitting based on zernike polynomials
Zhijun Yang, W. Zhou, X. Chen, X. Chen, K. Li (2013)
Modeling and Optimal Design of Membrane Based Fast-Tool-Servo for Freeform Manufacturing of Micro Optical Lens ArrayKey Engineering Materials, 552
Sisi Li, Yongbo Wu, M. Fujimoto, M. Nomura (2016)
Improving the Working Surface Condition of Electroplated Cubic Boron Nitride Grinding Quill in Surface Grinding of Inconel 718 by the Assistance of Ultrasonic VibrationJournal of Manufacturing Science and Engineering-transactions of The Asme, 138
D. Yu, Y. Wong, G. Hong (2011)
A novel method for determination of the subsurface damage depth in diamond turning of brittle materialsInternational Journal of Machine Tools & Manufacture, 51
G Hillerström, K Walgama (1996)
Repetitive control theory and applications : a surveyEur Geriatr Med, 1
S. Peterhänsel, C. Pruss, W. Osten (2013)
Phase errors in high line density CGH used for aspheric testing: beyond scalar approximation.Optics express, 21 10
Xianlei Liu, Xiaodong Zhang, F. Fang, Zhen Zeng, Huimin Gao, Xiaotang Hu (2015)
Influence of machining errors on form errors of microlens arrays in ultra-precision turningInternational Journal of Machine Tools & Manufacture, 96
W. Gao, T. Araki, S. Kiyono, Y. Okazaki, M. Yamanaka (2003)
Precision nano-fabrication and evaluation of a large area sinusoidal grid surface for a surface encoderPrecision Engineering-journal of The International Societies for Precision Engineering and Nanotechnology, 27
Ho-Sang Kim, Eui-Jung Kim (2003)
Feed-forward control of fast tool servo for real-time correction of spindle error in diamond turning of flat surfacesInternational Journal of Machine Tools & Manufacture, 43
Sun Tao (2009)
Adaptive PID Control of Fast Tool Servo Based on Neural NetworkAviation Precision Manufacturing Technology
H. Hansen, N. Kofod, L. Chiffre, T. Wanheim (2002)
Calibration and Industrial Application of Instrument for Surface Mapping based on AFMCIRP Annals, 51
M. Miller, K. Garrard, T. Dow, L. Taylor (1994)
A controller architecture for integrating a fast tool servo into a diamond turning machinePrecision Engineering-journal of The International Societies for Precision Engineering and Nanotechnology, 16
Jiekun Li, Xiaohui Qi, Yuanqing Xia, Fan Pu, K. Chang (2015)
Frequency domain stability analysis of nonlinear active disturbance rejection control system.ISA transactions, 56
C. Cheung, W. Lee (2000)
Modelling and simulation of surface topography in ultra-precision diamond turningProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 214
E. Brinksmeier, O. Riemer, R. Gläbe, A. Meier (2011)
Material aspects for the diamond machining of submicron optical structures for UV-applicationInternational Journal of Nanomanufacturing, 7
W. Gao, J. Aoki, Bingfeng Ju, S. Kiyono (2007)
Surface profile measurement of a sinusoidal grid using an atomic force microscope on a diamond turning machinePrecision Engineering-journal of The International Societies for Precision Engineering and Nanotechnology, 31
Qiang Liu, Shengli Pan, Heliang Yan, Xiaoqin Zhou, Rongqi Wang (2016)
In situ measurement and error compensation of optical freeform surfaces based on a two DOF fast tool servoThe International Journal of Advanced Manufacturing Technology, 86
W. Lee, S. To, C. Cheung, D. Gao, W. Chiu (2003)
Ultra-precision machining of optical microstructures
D. Trumper, Xiaodong Lu (2007)
Fast Tool Servos: Advances in Precision, Acceleration, and Bandwidth
F. Fang, N. Zhang, Xiaodong Zhang (2016)
Precision injection molding of freeform opticsAdvanced Optical Technologies, 5
Haoquan Ma, Jie Tian, D. Hu (2013)
Development of a fast tool servo in noncircular turning and its controlMechanical Systems and Signal Processing, 41
A. Mamedov, I. Lazoglu (2016)
An evaluation of micro milling chip thickness models for the process mechanicsThe International Journal of Advanced Manufacturing Technology, 87
Xiaodong Zhang, Zhen Zeng, Xianlei Liu, F. Fang (2015)
Compensation strategy for machining optical freeform surfaces by the combined on- and off-machine measurement.Optics express, 23 19
蔺超 (2011)
A flexure-based long-stroke fast tool servo for diamond turning
P. Pai, P. Rao (2002)
Acoustic emission analysis for tool wear monitoring in face millingInternational Journal of Production Research, 40
Xiaodong Zhang, Lili Jiang, Zhen Zeng, F. Fang, Xianlei Liu (2015)
High angular accuracy manufacture method of micro v-grooves based on tool alignment by on-machine measurement.Optics express, 23 21
JQ Wu, Q Zou, T Wang, QC Zhang, YL Zhang, JN Yao (2013)
Structures analysis and optimum design of the large stroke two-axis fast tool servoAdv Mater, 853
Dan Wu, Shunyan Zhou, Xiaodan Xie (2011)
Design and control of an electromagnetic fast tool servo with high bandwidthIet Electric Power Applications, 5
F. Fang, X. Zhang, X. Hu (2008)
Cylindrical coordinate machining of optical freeform surfaces.Optics express, 16 10
Yuan-Liu Chen, Shu Wang, Y. Shimizu, S. Ito, W. Gao, Bingfeng Ju (2015)
An in-process measurement method for repair of defective microstructures by using a fast tool servo with a force sensorPrecision Engineering-journal of The International Societies for Precision Engineering and Nanotechnology, 39
F. Lin, H. Shieh, P. Huang (2006)
Adaptive wavelet neural network control with hysteresis estimation for piezo-positioning mechanismIEEE Transactions on Neural Networks, 17
Xiaodong Zhang, Qichang Wang, F. Fang, Xianlei Liu (2013)
Controllable fabrication of freeform opticsInternational Journal of Precision Technology, 3
Gunnar Hillerström, K. Walgama (1996)
Repetitive Control Theory and Applications - A SurveyIFAC Proceedings Volumes, 29
S. Scheiding, A. Yi, A. Gebhardt, Lei Li, S. Risse, R. Eberhardt, A. Tünnermann (2011)
Freeform manufacturing of a microoptical lens array on a steep curved substrate by use of a voice coil fast tool servo.Optics express, 19 24
Hong Lu, S. Choi, S.M. Lee, C. Park, D.W. Lee (2012)
Development of a Magnified Mechanism for Fast Tool Servo SystemKey Engineering Materials, 516
X. Ouyang, Wuu Chen, K. Li, X. Chen, X. Chen, Qiang Liu (2013)
Study on the Fast Tool Servo (FTS) with the Stiffness AdjustableKey Engineering Materials, 552
Liu Peng (2007)
Micro-displacement magnifying mechanism used in piezo-stack pumpOptics and Precision Engineering
Jingbo Zhou, Lei Li, Neil Naples, T. Sun, A. Yi (2013)
Fabrication of continuous diffractive optical elements using a fast tool servo diamond turning processJournal of Micromechanics and Microengineering, 23
T. Wada, Masayuki Takahashi, I. Tashiro, T. Moriwaki, K. Nakamoto (2008)
Development of a Three Axis Controlled Fast Tool Servo for Ultra Precision Machining (3rd Report) : High-speed Machining of Dies for Micro-Optical Devises Using High-Speed Tool Motion ControlJournal of The Japan Society for Precision Engineering, 74
D. Dimla, P. Lister (2000)
On-line metal cutting tool condition monitoring.: I: force and vibration analysesInternational Journal of Machine Tools & Manufacture, 40
W. Plummer (2005)
Free-form optical components in some early commercial products, 5865
A. Boryczko (2010)
Distribution of Roughness and Waviness Components of Turned Surface profilesMetrology and Measurement Systems, 17
Dan Wu, Ken Chen, Xiankui Wang (2007)
Tracking control and active disturbance rejection with application to noncircular machiningInternational Journal of Machine Tools & Manufacture, 47
Haifeng Wang, S. Yang (2013)
Design and control of a fast tool servo used in noncircular piston turning processMechanical Systems and Signal Processing, 36
Huimin Gao, F. Fang, Xiaodong Zhang (2014)
Reverse analysis on the geometric errors of ultra-precision machineThe International Journal of Advanced Manufacturing Technology, 73
Xiaojun-Hu, Shengyi-Li, Yulie-Wu (2008)
Resolution-enhanced subpixel phase retrieval method.Applied optics, 47 32
X. Lu, D. Trumper (2005)
Ultrafast Tool Servos for Diamond TurningCIRP Annals, 54
Yuan-Liu Chen, Y. Shimizu, Yindi Cai, Shu Wang, S. Ito, Bingfeng Ju, W. Gao (2015)
Self-evaluation of the cutting edge contour of a microdiamond tool with a force sensor integrated fast tool servo on an ultra-precision latheThe International Journal of Advanced Manufacturing Technology, 77
Wang Lei, Tan Jiubin, Z. Shan (2010)
A giant magnetostrictive actuator based on use of permanent magnetThe International Journal of Advanced Manufacturing Technology, 46
Xiaoqin Zhou, Zhiwei Zhu, Shaoxin Zhao, Jieqiong Lin, Jianli Dou (2011)
An Improved Adaptive Feedforward Cancellation for Trajectory Tracking of Fast Tool Servo Based on Fractional CalculusProcedia Engineering, 15
Hong Lu, Soo-chang Choi, Sang Lee, Deug-Woo Lee (2012)
Microstructure of fast tool servo machining on copper alloyTransactions of Nonferrous Metals Society of China, 22
Wang Xiankui (2006)
Surface generation method for non-rotationally symmetric turningJournal of Tsinghua University
H. Tanabi, Naser Babaei, A. Babaei (2011)
Real-Time Tool Wear Monitoring Based on Feed Motor Current in Chuck-Center Mounting ConditionAdvanced Materials Research, 341-342
J. Liow, Ulrich Frye (2010)
Surfaces Machined by Micro End-Mills at Constant Chip LoadKey Engineering Materials, 443
Y. Nie, F. Fang, Xiao Zhang (2013)
Fast Tool Servo Driven by Electromagnetic Force Applied in Freeform Surfaces MachiningAdvanced Materials Research, 709
K. Medicus, J. Nelson, M. Mandina (2013)
Highly accurate surface maps from profilometer measurements, 8788
Huan Zhou, X. Chen, X. Chen, K. Li (2013)
Design Calculation of Micro-Displacement Amplifier Mechanism Based on Bridge Flexure HingeKey Engineering Materials, 552
Xiaodong Zhang, F. Fang, Linhui Yu, Lili Jiang, Y. Guo (2013)
Slow slide servo turning of compound eye lensOptical Engineering, 52
Huanqi Ding, Shan-ming Luo, Xue-feng Chang, Dan Xie (2014)
Optimization Algorithm of Tool Radius Compensation in Fast Tool Servo Machining of Microlens ArraysAdvanced Materials Research, 1039
BF Ju, WL Zhu, S Yang, K Yang (2014)
Scanning tunneling microscopy-based in situ measurement of fast tool servo-assisted diamond turning micro-structuresMeas Sci Technol, 25
P. Dumas (2014)
Advancements in Sub-aperture Stitching and Magnetorheological Finishing for Freeform Surfaces
Greg Forbes (2012)
Characterizing the shape of freeform optics.Optics express, 20 3
Ching-Ming Chen, R. Fung (2010)
Dynamic modeling of a scott-russell amplifying mechanism driven by a piezoelectric actuatorIEEE ICCA 2010
Ying Cheng, Xiaodong Zhang, G. Zhang (2013)
Design and machining of Fresnel solar concentrator surfacesInternational Journal of Precision Technology, 3
S. Ludwick (1999)
A rotary fast tool servo for diamond turning of asymmetric optics
D. Yu, Y Wong, G. Hong (2011)
Ultraprecision machining of micro-structured functional surfaces on brittle materialsJournal of Micromechanics and Microengineering, 21
Shaojian Zhang, S. To, Zhiwei Zhu, G. Zhang (2016)
A review of fly cutting applied to surface generation in ultra-precision machiningInternational Journal of Machine Tools & Manufacture, 103
R. Teti, K. Jemielniak, G. O'Donnell, D. Dornfeld (2010)
Advanced monitoring of machining operationsCirp Annals-manufacturing Technology, 59
R. Montesanti (2005)
High bandwidth rotary fast tool servos and a hybrid rotary/linear electromagnetic actuator
Wu Da (2013)
Research and industrial applications of active disturbance rejection control to fast tool servosControl theory & applications
Zhijun Yang, Youdun Bai, Sujuan Wang, X. Chen, Qiang Liu, K. Li, Han Wang, X. Chen (2014)
The Development of an Displacement Sensor Embedded Voice Coil Motor Based Fast-Tool-Servo for the Machining of Micro-StructureKey Engineering Materials, 625
(2011)
Study on development of self-sensing AFM head and hybrid measurement system
E. Brinksmeier, O. Riemer, R. Gläbe, B. Lünemann, C. Kopylow, C. Dankwart, Alan Meier (2010)
Submicron functional surfaces generated by diamond machiningCirp Annals-manufacturing Technology, 59
Qiang Liu, Xiaoqin Zhou, Zhiwei Liu, Chao Lin, Long Ma (2014)
Long-stroke fast tool servo and a tool setting method for freeform optics fabricationOptical Engineering, 53
Ping Su, Jianshe Ma, Qiaofeng Tan, G. Kang, Yi Liu, Guofan Jin (2012)
Computer generated hologram null test of a freeform optical surface with rectangular apertureOptical Engineering, 51
F. Fang, X. Zhang, A. Weckenmann, Guoxiong Zhang, C. Evans (2013)
Manufacturing and measurement of freeform opticsCirp Annals-manufacturing Technology, 62
J. Norwood, J. Moses, L. Fletcher, G. Orton, P. Irwin, S. Atreya, K. Rages, T. Cavali'e, A. S'anchez-Lavega, R. Hueso, N. Chanover (2015)
Giant Planet Observations with the James Webb Space TelescopePublications of the Astronomical Society of the Pacific, 128
Zexiao Li, F. Fang, Jinjin Chen, Xiaodong Zhang (2017)
Machining approach of freeform optics on infrared materials via ultra-precision turning.Optics express, 25 3
Ho-Soon Yang, Sug-Whan Kim, D. Walker (2003)
Novel laser datum system for nanometric profilometry for large optical surfaces.Optics express, 11 6
J Sun, GS Hong, M Rahman, YS Wong (2004)
Identification of feature set for effective tool condition monitoring by acoustic emission sensingIint J Prod Res, 42
Qichang Wang, Xiaodong Zhang, Yue Peng, F. Fang (2012)
Data filtering of optical freeform measurement based on a modified 2D cascaded approximating spline filter, 8416
Xianlei Liu, Xiaodong Zhang, F. Fang, Shugui Liu (2016)
Identification and compensation of main machining errors on surface form accuracy in ultra-precision diamond turningInternational Journal of Machine Tools & Manufacture, 105
Y. Nie, F. Fang, X. Zhang (2014)
System design of Maxwell force driving fast tool servos based on model analysisThe International Journal of Advanced Manufacturing Technology, 72
(2014)
The study of fast tool servo driven by Maxwell normal stress motor and its techniques
S. Sun, M. Brandt, M. Dargusch (2009)
Characteristics of cutting forces and chip formation in machining of titanium alloysInternational Journal of Machine Tools & Manufacture, 49
Xiaofeng Zhang, F. Fang, Q. Wu, Xianlei Liu, Huimin Gao (2013)
Coordinate transformation machining of off-axis aspheric mirrorsThe International Journal of Advanced Manufacturing Technology, 67
Xiaodong Zhang, Huimin Gao, Y. Guo, Guoxiong Zhang (2012)
Machining of optical freeform prisms by rotating tools turningCirp Annals-manufacturing Technology, 61
Qiang Liu, Xiaoqin Zhou, Pengzi Xu (2014)
A new tool path for optical freeform surface fast tool servo diamond turningProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 228
C. Cheung, K. Hu, X. Jiang, L. Kong (2010)
Characterization of surface defects in fast tool servo machining of microlens array using a pattern recognition and analysis methodMeasurement, 43
M. Bono, R. Hibbard (2004)
Fabrication and Metrology of Micro-Scale Sinusoidal Surfaces in Polymer Workpiece Materials
J. Köhler, Alexander Seibel (2015)
FTS-based face milling of micro structuresProcedia CIRP, 28
C. Zhou, Hong Chen (2010)
Tool Path Generation Method of Equal Approximation Error for Free-Form Surface in High Speed MachiningAdvanced Materials Research, 102-104
E. Brinksmeier, R. Gläbe, L. Schönemann (2012)
Diamond Micro Chiseling of large-scale retroreflective arraysPrecision Engineering-journal of The International Societies for Precision Engineering and Nanotechnology, 36
(2010)
Servo piezoelectric tool SPT400MML for the fast and precise machining of free forms
E Brinksmeier, R Gläbe, L Schönemann (2012)
Review on diamond-machining processes for the generation of functional surface structuresCirp Ann-Manuf Techn, 5
Qunyi Chen (2009)
Design and control of a fast long range actuator for single point diamond turning
D Wu, T Zhao, K CHEN (2013)
Research and industrial applications of active disturbance rejection control to fast tool servosIET Control Theory A, 30
F Fang, N Zhang, X Zhang (2016)
Precision injection molding of freeform optics. ADVOpt Technol, 5
E. Brinksmeier, R. Gläbe, L. Schönemann (2012)
Review on diamond-machining processes for the generation of functional surface structuresCirp Journal of Manufacturing Science and Technology, 5
(2008)
Research review of fast tool servo
Jingbo Zhou, T. Sun, G. Hou, E. Qi (2012)
Key technologies for diamond turning of non-rotational symmetrical micro-structured surfaces, 8416
Minghui Zhao, Xuesen Zhao, Zengqiang Li, T. Sun (2014)
Nearly arc-length tool path generation and tool radius compensation algorithm research in FTS turning, 9281
PS Pai, PR Rao (2002)
Acoustic emission analysis for tool wear monitoring in face millingIint J Prod Res, 40
Ya Wang, Yi Wang, X. Zhou, Aiyun Hao (2011)
A New 2-DOF Fast Tool Servo for Diamond Turning of Freeform Optical SurfaceApplied Mechanics and Materials, 101-102
H. Feng, Risheng Xia, Yiyu Li, Jiaojie Chen, Yimin Yuan, Dexi Zhu, Siyun Chen, Hao Chen (2017)
Fabrication of freeform progressive addition lenses using a self-developed long stroke fast tool servoThe International Journal of Advanced Manufacturing Technology, 91
Xiao Wang, Z. Ding, Y. Ma (2014)
Turning of Micro-Structured Surfaces Based on a Fast Tool Servo SystemApplied Mechanics and Materials, 684
D. Yu, S. Gan, Y. Wong, G. Hong, Mustafizur Rahman, Jin Yao (2012)
Optimized tool path generation for fast tool servo diamond turning of micro-structured surfacesThe International Journal of Advanced Manufacturing Technology, 63
Haijun Zhang, G. Dong, M. Zhou, Cheng-wei Song, Yanhua Huang, K. Du (2013)
A new variable structure sliding mode control strategy for FTS in diamond-cutting microstructured surfacesThe International Journal of Advanced Manufacturing Technology, 65
Stefan Rakuff, J. Cuttino (2009)
Design and testing of a long-range, precision fast tool servo system for diamond turningPrecision Engineering-journal of The International Societies for Precision Engineering and Nanotechnology, 33
Wule Zhu, Shunyao Yang, Bingfeng Ju, Jiacheng Jiang, Anyu Sun (2016)
Scanning tunneling microscopy-based on-machine measurement for diamond fly cutting of micro-structured surfacesPrecision Engineering-journal of The International Societies for Precision Engineering and Nanotechnology, 43
Fast tool servo (FTS) in ultra-precision machining (UPM) is an enabling and efficient technology for fabricating optical freeform surfaces or microstructures with submicrometric form accuracy and nanometric surface finish. There are many kinds of FTS in the different driving principle to present their various performances currently. Their kernel technologies influence the machining ability and accuracy of freeform surfaces, consequently receiving much research attention and interest. These technologies are generally summarized as the development of FTS structure, the advanced control algorithms, tool path planning, machining condition monitoring, and surface measurement and error compensation. This paper aims to survey the current state of the art in machining freeform optics by FTS. An analysis of the principle, performance, and application of FTS machining with regard to freeform optics is presented. And the key machining technologies for optical freeform surfaces by FTS are then introduced in detail. The challenges and opportunities for further studies are concluded according to the FTS machining difficult of optical freeform surfaces finally.
The International Journal of Advanced Manufacturing Technology – Springer Journals
Published: Nov 18, 2017
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.