Modelling and experimental validation of surface roughness in precision turning of dual-phase materials considering process uncertainties

Modelling and experimental validation of surface roughness in precision turning of dual-phase... This paper presents the development and experimental validation of a model to predict the surface roughness generated during precision turning. In particular, in addition to the kinematic parameters of the turning process, the proposed model also takes into consideration the effects of the minimum chip thickness and elastic recovery together with uncertainties attributable to the blend nature of dual-phase materials. The aim of the model is to minimise the contribution of uncertainty errors due to the stochastic distribution of the phases present within the material microstructure, to better predict surface roughness under different cutting conditions. The developed model was experimentally validated by machining two different dual-phase materials, brass 6040 and medium carbon steel AISI 1045, under a range of processing parameters. The roughness of the generated surface was measured and compared with those predicted by the model for similar conditions. Preliminary results indicated that the trend of model’s predictions agreed relatively well with the experimental results. However, the proposed model was then experimentally calibrated and lower differences between measured and predicted values were obtained, these varied between 16.5 and 23.3%. If results obtained at very low feed rates were excluded, the average differences for brass 6040 were substantially reduced http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png International Journal on Interactive Design and Manufacturing Springer Journals

Modelling and experimental validation of surface roughness in precision turning of dual-phase materials considering process uncertainties

Loading next page...
 
/lp/springer_journal/modelling-and-experimental-validation-of-surface-roughness-in-nKZjf9tsyl
Publisher
Springer Journals
Copyright
Copyright © 2018 by Springer-Verlag France SAS, part of Springer Nature
Subject
Engineering; Engineering, general; Engineering Design; Mechanical Engineering; Computer-Aided Engineering (CAD, CAE) and Design; Electronics and Microelectronics, Instrumentation; Industrial Design
ISSN
1955-2513
eISSN
1955-2505
D.O.I.
10.1007/s12008-018-0490-8
Publisher site
See Article on Publisher Site

Abstract

This paper presents the development and experimental validation of a model to predict the surface roughness generated during precision turning. In particular, in addition to the kinematic parameters of the turning process, the proposed model also takes into consideration the effects of the minimum chip thickness and elastic recovery together with uncertainties attributable to the blend nature of dual-phase materials. The aim of the model is to minimise the contribution of uncertainty errors due to the stochastic distribution of the phases present within the material microstructure, to better predict surface roughness under different cutting conditions. The developed model was experimentally validated by machining two different dual-phase materials, brass 6040 and medium carbon steel AISI 1045, under a range of processing parameters. The roughness of the generated surface was measured and compared with those predicted by the model for similar conditions. Preliminary results indicated that the trend of model’s predictions agreed relatively well with the experimental results. However, the proposed model was then experimentally calibrated and lower differences between measured and predicted values were obtained, these varied between 16.5 and 23.3%. If results obtained at very low feed rates were excluded, the average differences for brass 6040 were substantially reduced

Journal

International Journal on Interactive Design and ManufacturingSpringer Journals

Published: Jun 5, 2018

References

You’re reading a free preview. Subscribe to read the entire article.


DeepDyve is your
personal research library

It’s your single place to instantly
discover and read the research
that matters to you.

Enjoy affordable access to
over 18 million articles from more than
15,000 peer-reviewed journals.

All for just $49/month

Explore the DeepDyve Library

Search

Query the DeepDyve database, plus search all of PubMed and Google Scholar seamlessly

Organize

Save any article or search result from DeepDyve, PubMed, and Google Scholar... all in one place.

Access

Get unlimited, online access to over 18 million full-text articles from more than 15,000 scientific journals.

Your journals are on DeepDyve

Read from thousands of the leading scholarly journals from SpringerNature, Elsevier, Wiley-Blackwell, Oxford University Press and more.

All the latest content is available, no embargo periods.

See the journals in your area

DeepDyve

Freelancer

DeepDyve

Pro

Price

FREE

$49/month
$360/year

Save searches from
Google Scholar,
PubMed

Create lists to
organize your research

Export lists, citations

Read DeepDyve articles

Abstract access only

Unlimited access to over
18 million full-text articles

Print

20 pages / month

PDF Discount

20% off