Access the full text.
Sign up today, get DeepDyve free for 14 days.
Z. Shi, A. Elfizy, B. St-Pierre, H. Attia (2011)
Experimental Study on Grinding of a Nickel-Based Alloy Using Vitrified CBN WheelsAdvanced Materials Research, 325
S. Malkin (1989)
Grinding Technology: Theory and Applications of Machining with Abrasives
S Malkin, TW Hwang (2007)
Handbook of advanced ceramics machining—mechanisms for grinding of ceramics
B. Denkena, J. Köhler, M. Dittrich (2014)
Chip formation and tool wear in turning of aluminum-alloyed UHC-steelsProduction Engineering, 8
(2007)
In: Marinescu ID (ed) Handbook of advanced ceramics machining-mechanisms for grinding of ceramics
P. Sands (1992)
The United Nations Framework Convention on Climate ChangeReview of European Community and International Environmental Law, 1
B. Denkena, J. Köhler, J. Kästner (2012)
Chip formation in grinding: an experimental studyProduction Engineering, 6
(1969)
Beschreibung der elementaren Kinematik des Schleifvorgangs, dissertation
(2015)
Mikrogeometrische Eingriffsverhältnisse beim Längsumfangsplanschleifen
(1988)
UHCS Containing Aluminum
C. Zeppenfeld, F. Klocke (2006)
Speed Stroke Grinding of γ-Titanium AluminidesCIRP Annals, 55
(1992)
HSG – Technologie, Handbuch zur praktischen Anwendung
R. Hood, F. Lechner, D. Aspinwall, W. Voice (2007)
Creep feed grinding of gamma titanium aluminide and burn resistant titanium alloys using SiC abrasiveInternational Journal of Machine Tools & Manufacture, 47
B. Denkena, T. Grove, M. Dittrich (2015)
Flow stress and temperature considerations for orthogonal cutting of an aluminum-alloyed UHC-steelProduction Engineering, 9
J. Köhler, Analía Moral, B. Denkena (2013)
Grinding of Iron-aluminides☆Procedia CIRP, 9
OD Sherby, CM Young, M Conrad, B Walser, M Eldon (1976)
Superplastic ultra high carbon steelUS Patent, 3
(2012)
Internationale Energieagentur: Anteil der Verkehrsträger an der weltweiten CO2-Emissionen aus der Verbrennung fossiler Brennstoffe im Jahr
(2011)
Spanen – Grundlagen
E. Taleff, Mamoru Nagao, K. Higashi, O. Sherby (1996)
High-strain-rate superplasticity in ultrahigh-carbon steel containing 10 wt.% Al (UHCS-10Al)Scripta Materialia, 34
D. Lesuer, C. Syn, A. Goldberg, J. Wadsworth, O. Sherby (1993)
The case for ultrahigh-carbon steels as structural materialsJOM, 45
(1988)
Application of superplastic UHC-steel for isothermal forging of machine components
(1997)
Untersuchung und Interpretation der beim Schleifen der Nickelbasislegierung IN 738 LC induzierten Gefügeänderungen in der Randzone
T. Göttsching, A. Wippermann, T. Grove (2016)
Quick Stop Device to Analyze the Chip Formation Mechanisms in Face GrindingAdvanced Materials Research, 1140
T. Oyama, O. Sherby, J. Wadsworth, B. Walser (1984)
Application of the divorced eutectoid transformation to the development of fine-grained, spheroidized structures in ultrahigh carbon steelsScripta Metallurgica, 18
O. Sherby, C. Young, B. Walser, Eldon Cady (1975)
Superplastic ultra high carbon steelScripta Metallurgica, 9
(2002)
Ermittlung des Einsatzverhaltens von Sol-Gel-Korund Schleifscheiben. dissertation. RWTH Aachen
(1985)
Kinematik und Mechanik des Schleifprozesses. dissertation. RWTH Aachen
B Denkena, T Grove, F Seiffert (2015)
Mikrogeometrische Eingriffsverhältnisse beim Längsumfangsplanschleifen. Diamond Business, 1/2015Heft, 52
W. Österle, P. Li (1997)
Mechanical and thermal response of a nickel-base superalloy upon grinding with high removal ratesMaterials Science and Engineering A-structural Materials Properties Microstructure and Processing, 238
(1998)
Mechanische und thermische Wirkung beim Schleifen keramischer Werkstoffe. dissertation
B. Denkena, T. Grove, M. Dittrich, C. Beiler, M. Lahres (2015)
Effects of alloying elements in UHC-steels and consequences for the machinabilityCirp Journal of Manufacturing Science and Technology, 10
Frédéric Pol, G. Hirt (2011)
Massivumformung dichtereduzierter UHC-Stähle unter nicht superplastischen Bedingungen
T Göttsching, A Wippermann, T Grove (2016)
Quick stop device to analyze the chip formation mechanisms in face grinding, submitted by B. DenkenaAdv Mater Res, 1140
The grinding process is still an important manufacturing process for the machining of automotive components. For power train components, ultra-high carbon steel (UHC-steel) is a promising new innovative alloy because of its low specific density. Results from turning of UHC-steel showed that the texture of UHC-steel significantly differs from conventional steels. Furthermore, extremely hard carbides, which are embedded into a soft ferrite matrix, result in a UHC-steel specific machining behavior and a high tool wear rate. Therefore, UHC-steel is marked as a difficult-to-cut material. So far, there are no research results available for the grinding of UHC-steel. Therefore, fundamental investigations were conducted in order to analyze the material removal and chip formation mechanisms. Scratching tests with a geometrically defined cubic boron nitride cutting edge showed ductile material removal mechanisms for a single grain chip thickness variation from h cu = 1.5 up to 14 μm. Analysis of the contact zone by means of an innovative quick stop device confirms these results.
The International Journal of Advanced Manufacturing Technology – Springer Journals
Published: Mar 16, 2017
Access the full text.
Sign up today, get DeepDyve free for 14 days.