Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Improving the Designs of Elements of Refractory Materials for the Tundish of Continuous Section Casters

Improving the Designs of Elements of Refractory Materials for the Tundish of Continuous Section... This article examines the designs of sets of equipment installed in the discharge chambers of the tundishes on continuous section casters. Further refinement and practical introduction of the designs will effectively extinguish the eddies that form above the discharge nozzles and improve the quality of the castings by forming a well-organized stream of molten metal. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Refractories and Industrial Ceramics Springer Journals

Improving the Designs of Elements of Refractory Materials for the Tundish of Continuous Section Casters

Loading next page...
1
 
/lp/springer_journal/improving-the-designs-of-elements-of-refractory-materials-for-the-m3AYDiu5Ch

References (9)

Publisher
Springer Journals
Copyright
Copyright © 2016 by Springer Science+Business Media New York
Subject
Material Science; Characterization and Evaluation of Materials; Materials Science, general; Ceramics, Glass, Composites, Natural Methods
ISSN
1083-4877
eISSN
1573-9139
DOI
10.1007/s11148-016-9914-9
Publisher site
See Article on Publisher Site

Abstract

This article examines the designs of sets of equipment installed in the discharge chambers of the tundishes on continuous section casters. Further refinement and practical introduction of the designs will effectively extinguish the eddies that form above the discharge nozzles and improve the quality of the castings by forming a well-organized stream of molten metal.

Journal

Refractories and Industrial CeramicsSpringer Journals

Published: May 30, 2016

There are no references for this article.