Implementation of the exploding wire technique to study blast-wave–structure interaction

Implementation of the exploding wire technique to study blast-wave–structure interaction The effort invested in improving our understanding of the physics of high-energy explosion events has been steadily increasing since the latter part of the twentieth century. Moreover, the dramatic increase in computer power over the last two decades has made the numerical simulation approach the dominant tool for investigating blast phenomena and their effects. However, field tests, on both large and small scales, are still in use. In the current paper, we present an experimental tool to better resolve and study the blast–structure interaction phenomenon and to help validate the numerical simulations of the same. The experimental tool uses an exploding wire technique to generate small-scale cylindrical and spherical blast waves. This approach permits safe operation, high repeatability, and the use of advanced diagnostic systems. The system was calibrated using an analytical model, an empirical model, and numerical simulation. To insure that spherical blast geometry was achieved, a set of free air blast experiments was done in which high-speed photography was used to monitor the blast structure. A scenario in which an explosion occurred in the vicinity of a structure demonstrated the system’s capabilities. Using this simple but not trivial configuration showed unequivocally the effectiveness of this tool. From this comparison, it was found that at early times of blast–structure interaction, the agreement between the two sets of results was very good, but at later times incongruences appeared. Effort has been made to interpret this observation. Furthermore, by using similitude analysis, the results obtained from the small-scale experiments can be applied to the full-scale problem. We have shown that an exploding wire system offers an inexpensive, safe, easy to operate, and effective tool for studying phenomena related to blast-wave–structure interactions. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Experiments in Fluids Springer Journals

Implementation of the exploding wire technique to study blast-wave–structure interaction

Loading next page...
 
/lp/springer_journal/implementation-of-the-exploding-wire-technique-to-study-blast-wave-0gteHY0xjd
Publisher
Springer-Verlag
Copyright
Copyright © 2012 by Springer-Verlag
Subject
Engineering; Engineering Fluid Dynamics; Engineering Thermodynamics, Heat and Mass Transfer; Fluid- and Aerodynamics
ISSN
0723-4864
eISSN
1432-1114
D.O.I.
10.1007/s00348-012-1339-8
Publisher site
See Article on Publisher Site

Abstract

The effort invested in improving our understanding of the physics of high-energy explosion events has been steadily increasing since the latter part of the twentieth century. Moreover, the dramatic increase in computer power over the last two decades has made the numerical simulation approach the dominant tool for investigating blast phenomena and their effects. However, field tests, on both large and small scales, are still in use. In the current paper, we present an experimental tool to better resolve and study the blast–structure interaction phenomenon and to help validate the numerical simulations of the same. The experimental tool uses an exploding wire technique to generate small-scale cylindrical and spherical blast waves. This approach permits safe operation, high repeatability, and the use of advanced diagnostic systems. The system was calibrated using an analytical model, an empirical model, and numerical simulation. To insure that spherical blast geometry was achieved, a set of free air blast experiments was done in which high-speed photography was used to monitor the blast structure. A scenario in which an explosion occurred in the vicinity of a structure demonstrated the system’s capabilities. Using this simple but not trivial configuration showed unequivocally the effectiveness of this tool. From this comparison, it was found that at early times of blast–structure interaction, the agreement between the two sets of results was very good, but at later times incongruences appeared. Effort has been made to interpret this observation. Furthermore, by using similitude analysis, the results obtained from the small-scale experiments can be applied to the full-scale problem. We have shown that an exploding wire system offers an inexpensive, safe, easy to operate, and effective tool for studying phenomena related to blast-wave–structure interactions.

Journal

Experiments in FluidsSpringer Journals

Published: Aug 29, 2012

References

You’re reading a free preview. Subscribe to read the entire article.


DeepDyve is your
personal research library

It’s your single place to instantly
discover and read the research
that matters to you.

Enjoy affordable access to
over 18 million articles from more than
15,000 peer-reviewed journals.

All for just $49/month

Explore the DeepDyve Library

Search

Query the DeepDyve database, plus search all of PubMed and Google Scholar seamlessly

Organize

Save any article or search result from DeepDyve, PubMed, and Google Scholar... all in one place.

Access

Get unlimited, online access to over 18 million full-text articles from more than 15,000 scientific journals.

Your journals are on DeepDyve

Read from thousands of the leading scholarly journals from SpringerNature, Elsevier, Wiley-Blackwell, Oxford University Press and more.

All the latest content is available, no embargo periods.

See the journals in your area

DeepDyve

Freelancer

DeepDyve

Pro

Price

FREE

$49/month
$360/year

Save searches from
Google Scholar,
PubMed

Create lists to
organize your research

Export lists, citations

Read DeepDyve articles

Abstract access only

Unlimited access to over
18 million full-text articles

Print

20 pages / month

PDF Discount

20% off