Access the full text.
Sign up today, get DeepDyve free for 14 days.
Francisco Pereira, H. Stüer, E. Graff, M. Gharib (2006)
Two-frame 3D particle trackingMeasurement Science and Technology, 17
T. Lim (1989)
An experimental study of a vortex ring interacting with an inclined wallExperiments in Fluids, 7
C. Willert, M. Gharib (1991)
Digital particle image velocimetryExperiments in Fluids, 10
M. Raffel (2002)
Particle Image Velocimetry: A Practical Guide
X. Yan, N. Saniei (1996)
Heat Transfer From an Obliquely Impinging Circular Air Jet to a Flat PlateHeat Transfer: Volume 2 — Heat Transfer in Turbulent Flows; Fundamentals of Convection Heat Transfer; Fundamentals of Natural Convection in Laminar and Turbulent Flows; Natural Circulation
A Glezer, M Amitay (2002)
Synthetic jetsAnnu Rev Fluid Mech, 34
H. Sheriff, D. Zumbrunnen (1994)
Effect of Flow Pulsations on the Cooling Effectiveness of an Impinging JetJournal of Heat Transfer-transactions of The Asme, 116
D. McCormick (2000)
BOUNDARY LAYER SEPARATION CONTROL WITH DIRECTED SYNTHETIC JETS
J. Walker, C. Smith, A. Cerra, T. Doligalski (1987)
The impact of a vortex ring on a wallJournal of Fluid Mechanics, 181
F. Pereira, M. Gharib, D. Dabiri, D. Modarress (2000)
Defocusing digital particle image velocimetry: a 3-component 3-dimensional DPIV measurement technique. Application to bubbly flowsExperiments in Fluids, 29
R. Verzicco, P. Orlandi (1994)
Normal and oblique collisions of a vortex ring with a wallMeccanica, 29
J. Geiser, K. Kiger (2010)
A simplified analog for a rotorcraft-in-ground-effect flow using a forced impinging jetBulletin of the American Physical Society, 63
TT Lim, TB Nickels (1995)
Fluid vortices
H. Yamada, Toshimitsu Kohsaka, H. Yamabe, T. Matsui (1982)
Flowfield Produced by a Vortex Ring Near a Plane WallJournal of the Physical Society of Japan, 51
J. Westerweel, D. Dabiri, M. Gharib (1997)
The effect of a discrete window offset on the accuracy of cross-correlation analysis of digital PIV recordingsExperiments in Fluids, 23
K. Mohseni, Hongyu Ran, T. Colonius (2001)
Numerical experiments on vortex ring formationJournal of Fluid Mechanics, 430
D. Troolin, E. Longmire (2010)
Volumetric velocity measurements of vortex rings from inclined exitsExperiments in Fluids, 48
H. Kobus, P. Leister, B. Westrich (1979)
FLOW FIELD AND SCOURING EFFECTS OF STEADY AND PULSATING JETS IMPINGING ON A MOVABLE BEDJournal of Hydraulic Research, 17
C. Naaktgeboren (2007)
Interaction of pressure and momentum driven flows with thin porous media: Experiments and modeling
X Yan, N Saniei (1997)
Heat transfer from an obliquely impinging circular air jet to a flat plateInt J Heat Fluid Flow, 18
F. Pedocchi, J. Martin, Marcelo García (2008)
Inexpensive fluorescent particles for large-scale experiments using particle image velocimetryExperiments in Fluids, 45
K Shariff, A Leonard (1992)
Vortex ringsAnnu Rev Fluid Mech, 24
Vortex–ring interactions with oblique boundaries were studied experimentally to determine the effects of plate angle on the generation of secondary vorticity, the evolution of the primary vorticity and secondary vorticity as they interact near the boundary, and the associated energy dissipation. Vortex rings were generated using a mechanical piston-cylinder vortex ring generator at jet Reynolds numbers 2,000–4,000 and stroke length to piston diameter ratios (L/D) in the range 0.75–2.0. The plate angle relative to the initial axis of the vortex ring ranged from 3 to 60°. Flow analysis was performed using planar laser-induced fluorescence (PLIF), digital particle image velocimetry (DPIV), and defocusing digital particle tracking velocimetry (DDPTV). Results showed the generation of secondary vorticity at the plate and its subsequent ejection into the fluid. The trajectories of the centers of circulation showed a maximum ejection angle of the secondary vorticity occurring for an angle of incidence of 10°. At lower incidence angles (<20°), the lower portion of the ring, which interacted with the plate first, played an important role in generation of the secondary vorticity and is a key reason for the maximum ejection angle for the secondary vorticity occurring at an incidence angle of 10°. Higher Reynolds number vortex rings resulted in more rapid destabilization of the flow. The three-dimensional DDPTV results showed an arc of secondary vorticity and secondary flow along the sides of the primary vortex ring as it collided with the boundary. Computation of the moments and products of kinetic energy and vorticity magnitude about the centroid of each vortex ring showed increasing asymmetry in the flow as the vortex interaction with the boundary evolved and more rapid dissipation of kinetic energy for higher incidence angles.
Experiments in Fluids – Springer Journals
Published: Jun 12, 2011
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.