Int J Adv Manuf Technol (2018) 95:1567 https://doi.org/10.1007/s00170-017-1168-2 CORRECTION Correction to: Stripping failure of punching pin in GPa-grade steels 1 2 3 4 1 Chanhee Won & Seokryul Lee & Jihoon Seo & Sung Hyuk Park & Jonghun Yoon Published online: 14 October 2017 # Springer-Verlag London Ltd. 2017 Correction to: Int J Adv Manuf Technol https://doi.org/10.1007/s00170-017-0791-2 The original version of this article unfortunately contained a mistake. Figure 9 was originally published with an incorrect image. The correct version of this figure is provided here and the original article was corrected. Exp. 8 mm Exp. 10 mm Exp. 15 mm Exp. 18 mm Analysis 8 mm Analysis 10 mm Analysis 15 mm Analysis 18 mm 0.0 0.2 0.4 0.6 0.8 Punch stroke(mm) The online version of the original article can be found at https://doi.org/ 10.1007/s00170-017-0791-2. * Jonghun Yoon firstname.lastname@example.org Department of Mechanical Engineering, Hanyang University, 55 Hanyangdaehak-ro, Sangnok-gu, Ansan-si, Gyeonggi-do 15588, Republic of Korea Steel Solution Marketing Department, POSCO, Incheon 21985, Republic of Korea Erae CS, Jinyoung-eup, Gimhae-si, Gyeongsangnam-do 50870, Republic of Korea School of Materials Science and Engineering, Kyungpook National University, 80 Daehakro, Bukgu, Daegu 702-701, Republic of Korea Punch load (N)
The International Journal of Advanced Manufacturing Technology – Springer Journals
Published: Oct 14, 2017
It’s your single place to instantly
discover and read the research
that matters to you.
Enjoy affordable access to
over 12 million articles from more than
10,000 peer-reviewed journals.
All for just $49/month
It’s easy to organize your research with our built-in tools.
All the latest content is available, no embargo periods.
“Whoa! It’s like Spotify but for academic articles.”@Phil_Robichaud