Access the full text.
Sign up today, get DeepDyve free for 14 days.
J. Robinson, D. Tanner, C. Truman, A. Paradowska, R. Wimpory (2012)
The influence of quench sensitivity on residual stresses in the aluminium alloys 7010 and 7075Materials Characterization, 65
T. Lorentzen, M. Hutchings, P. Withers, T. Holden (2005)
Introduction to the Characterization of Residual Stress by Neutron Diffraction
Youtsos Anastasius (2005)
International Technical Specification for Non Destructive Testing-Standards Test Method for Determining Residual Stresses by Neutron Diffraction-CEN ISO/TS 21432:2005
Omar Salih, H. Ou, Wei Sun, D. McCartney (2015)
A review of friction stir welding of aluminium matrix compositesMaterials & Design, 86
Andrew Biro, Brendan Chenelle, D. Lados (2012)
Processing, Microstructure, and Residual Stress Effects on Strength and Fatigue Crack Growth Properties in Friction Stir Welding: A ReviewMetallurgical and Materials Transactions B, 43
P. Withers, H. Bhadeshia (2001)
Residual stress. Part 2 – Nature and originsMaterials Science and Technology, 17
増淵 興一 (1980)
Analysis of welded structures : residual stresses, distortion, and their consequences
S. Kurz, S. Meka, N. Schell, W. Ecker, J. Keckes, E. Mittemeijer (2015)
Residual stress and microstructure depth gradients in nitrided iron-based alloys revealed by dynamical cross-sectional transmission X-ray microdiffractionActa Materialia, 87
JB Kortright, AC Thompson (2009)
X-ray data booklet
S. Ferreira-Barragáns, R. Fernández, P. Fernández-Castrillo, G. González-Doncel (2012)
Kinetics of tri-axial and spatial residual stress relaxation: Study by synchrotron radiation diffraction in a 2014Al alloyJournal of Alloys and Compounds, 523
(2010)
Characterization research of aluminium alloy internal defect by short wavelength X-ray diffraction
Joaquín Ramírez-Rico, Seung-Yub Lee, J. Ling, I. Noyan (2016)
Stress measurement using area detectors: a theoretical and experimental comparison of different methods in ferritic steel using a portable X-ray apparatusJournal of Materials Science, 51
Li-na Zhu, Bin-shi Xu, Hai-dou Wang, Chengbiao Wang (2012)
Microstructure and nanoindentation measurement of residual stress in Fe-based coating by laser claddingJournal of Materials Science, 47
(2016)
Noyan IC (2016) Stress measurement using area detectors: a theoretical and experimental comparison of different methods in ferritic steel using a portable X-ray apparatus
Xianfu Huang, Zhanwei Liu, H. Xie (2013)
Recent Progress in Residual Stress Measurement TechniquesActa Mechanica Solida Sinica, 26
A. Ahi, J. Yousefi, M. Najafabadi, A. Esmaeilzare, A. Oskouei (2017)
Residual stress evaluation in friction stir-welded aluminum plates using finite element method and acoustic emissionJournal of Materials Science, 52
D. Field, T. Nelson, Y. Hovanski, K. Jata (2001)
Heterogeneity of crystallographic texture in friction stir welds of aluminumMetallurgical and Materials Transactions A, 32
R. Rodriguez, J. Jordon, P. Allison, T. Rushing, L. Garcia (2015)
Microstructure and mechanical properties of dissimilar friction stir welding of 6061-to-7050 aluminum alloysMaterials & Design, 83
P. Withers, M. Preuss, A. Steuwer, J. Pang (2007)
Methods for obtaining the strain‐free lattice parameter when using diffraction to determine residual stressJournal of Applied Crystallography, 40
G. Biallas (2013)
Effect of welding residual stresses on fatigue crack growth thresholdsInternational Journal of Fatigue, 50
F. Barlat, O. Richmond (1987)
Prediction of tricomponent plane stress yield surfaces and associated flow and failure behavior of strongly textured f.c.c. polycrystalline sheetsMaterials Science and Engineering, 95
Jin Zhang (2013)
Internal Residual Stresses in the Friction Stir Weldment of 2024-T351 Al Alloy Determined by Short Wavelength X-ray DiffractionJournal of Mechanical Engineering, 49
Pengfei Ji, Zhong Yang, Jin Zhang, Lin Zheng, V. Ji, V. Klosek (2015)
Residual stress distribution and microstructure in the friction stir weld of 7075 aluminum alloyJournal of Materials Science, 50
J. Robinson, S. Hossain, C. Truman, A. Paradowska, D. Hughes, R. Wimpory, M. Fox (2010)
Residual stress in 7449 aluminium alloy forgingsMaterials Science and Engineering A-structural Materials Properties Microstructure and Processing, 527
(2008)
Non-destructive testing. Standard test method for determining of residual stresses by neutron
Jin Zhang, Lin Zheng, Xue-bin Guo, V. Ji, V. Klosek (2013)
Residual Stresses Comparison Determined by Short-Wavelength X-Ray Diffraction and Neutron Diffraction for 7075 Aluminum AlloyJournal of Nondestructive Evaluation, 33
W. Woo, G. An, C. Truman, Wenchun Jiang, M. Hill (2016)
Two-dimensional mapping of residual stresses in a thick dissimilar weld using contour method, deep hole drilling, and neutron diffractionJournal of Materials Science, 51
HJ Bunge, HR Wenk, J Pannetier (1982)
Neutron diffraction texture analysis using a 2θ-position sensitive detectorTexture Microst, 5
(2008)
Non-destructive testing–test method for residual stress analysis by X-ray diffraction
W. Woo, G. An, V. Em, A. Wald, M. Hill (2014)
Through-thickness distributions of residual stresses in an 80 mm thick weld using neutron diffraction and contour methodJournal of Materials Science, 50
P. Cavaliere, E. Cerri, A. Squillace (2005)
Mechanical response of 2024-7075 aluminium alloys joined by Friction Stir WeldingJournal of Materials Science, 40
J Zhang, F Li, L Zheng, X Guo (2013)
Internal residual stresses in the friction stir weldment of 2024-T351 Al alloy determined by short wavelength X-ray diffractionChin J Mech Eng, 49
U. Welzel, J. Ligot, P. Lamparter, Arnold Vermeulen, E. Mittemeijer (2005)
Stress analysis of polycrystalline thin films and surface regions by X-ray diffractionJournal of Applied Crystallography, 38
R. Treml, D. Kozic, J. Zechner, X. Maeder, B. Sartory, H. Gänser, R. Schöngrundner, J. Michler, R. Brunner, D. Kiener (2016)
High resolution determination of local residual stress gradients in single- and multilayer thin film systemsActa Materialia, 103
M. Prime, M. Hill (2002)
Residual stress, stress relief, and inhomogeneity in aluminum plateScripta Materialia, 46
(2009)
X - ray energy emission energies
PJ Withers, H Bhadeshia (2001)
Overview—residual stress part 2—nature and originsMater Sci Tech Lond, 17
Wang Xinyun, H. Hu, Xia Juchen (2009)
Effect of deformation condition on plastic anisotropy of as-rolled 7050 aluminum alloy plateMaterials Science and Engineering A-structural Materials Properties Microstructure and Processing, 515
Zhao Zhang, Q. Wu, M. Grujicic, Z. Wan (2016)
Monte Carlo simulation of grain growth and welding zones in friction stir welding of AA6082-T6Journal of Materials Science, 51
X. Zhang, D. Ni, B. Xiao, H. Andrä, W. Gan, M. Hofmann, Zongyi Ma (2015)
Determination of macroscopic and microscopic residual stresses in friction stir welded metal matrix composites via neutron diffractionActa Materialia, 87
(2009)
Measuring device for the shortwavelength x ray diffraction and a method thereof. US Patent 7583788
(2009)
X-ray energy emission energies. In: Thompson AC (ed) X-ray data booklet
H. Aval (2015)
Microstructure and residual stress distributions in friction stir welding of dissimilar aluminium alloysMaterials & Design, 87
H. Wenk (2006)
Neutron diffraction texture analysisReviews in Mineralogy & Geochemistry, 63
(2010)
Measuring the residual stress through thichkness of aluminum alloys by short wavelength X-ray
A friction-stir-welded (FSW) AA7050-T7451 pre-stretched plate was investigated nondestructively using the short-wavelength X-ray diffraction method to study the distribution of internal residual stress. During the investigation, anomalous deviation of the diffraction peak with crystal plane Al (111) was observed causing large testing errors. The relationship between texture of the material and the anomalous deviation peaks of (111), (200) and (311) and the method to eliminate their effect on residual stress determination were investigated. In addition, the comparison of the average d 0 method and the in situ d 0 method was performed using the three crystal planes to solve the problem caused by gradient in weld structure. Results showed that the anomalous deviations of different crystal planes were different from each other in the directions deflected from the maximum pole density direction. The method of residual stress determination performed in the directions of maximum pole density proved to be helpful to reduce the effect of anomalous deviations. The values and profiles of the residual stress tested by this method using (111), (200) and (311) were identical. The results suggest that in situ d 0 method could be used to eliminate the influence of the difference in lattice spacing among different areas of the FSW plate. The errors of residual stress determination decreased with the increase in the diffracting plane crystal indices.
Journal of Materials Science – Springer Journals
Published: Jul 28, 2017
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.