Access the full text.
Sign up today, get DeepDyve free for 14 days.
V. Kuzin (2011)
Microstructural model of ceramic cutting plateRussian Engineering Research, 31
Ambuj Saxena, S. Paul (2007)
Numerical modelling of kerf geometry in abrasive water jet machiningInternational Journal of Abrasive Technology, 1
(2015)
Effect of air - abrasive treatment on operating properties of objects mad of oxide - carbide ceramic
(2015)
Analysis of the reliability of ceramic components after hydroabrasive treatment
M. Wakuda, Y. Yamauchi, S. Kanzaki (2003)
Material response to particle impact during abrasive jet machining of alumina ceramicsJournal of Materials Processing Technology, 132
M. Wakuda, Y. Yamauchi, S. Kanzaki (2002)
Effect of workpiece properties on machinability in abrasive jet machining of ceramic materialsPrecision Engineering-journal of The International Societies for Precision Engineering and Nanotechnology, 26
V. Kuzin, E. Korshunova, N. Portnoi, S. Fedorov (2016)
Numerical Modeling of the Stress-Strained State of a Surface Layer of Oxide-Carbide Ceramic with Jet-Abrasive TreatmentRefractories and Industrial Ceramics, 56
V. Kuzin, S. Grigor'ev, S. Fedorov, K. Veprintsev, N. Portnoi, I. Sazanov (2015)
Morphology of the Surface of a High-Density Ceramic After Hydroabrasive MachiningRefractories and Industrial Ceramics, 56
V. Kuzin, S. Grigoriev (2013)
Method of Investigation of the Stress-Strain State of Surface Layer of Machine Elements from a Sintered Nonuniform MaterialApplied Mechanics and Materials, 486
VV Kuzin, ED Korshunova, NR Portnoi (2015)
Numerical modeling of the stress-strain state of a surface layer of oxide-carbide ceramic with jet-abrasive treatmentNovye Ogneupory, 12
(2015)
Federov, et al., “Analysis of the reliability of ceramic components after hydroabrasive treatment
S. Grigor'ev, V. Myachenkov, V. Kuzin (2011)
Automated thermal-strength calculations of ceramic cutting platesRussian Engineering Research, 31
R. Miranda, L. Quintino (2005)
Microstructural study of material removal mechanisms observed in abrasive waterjet cutting of calcareous stonesMaterials Characterization, 54
A. El-Domiaty, A. Abdel-Rahman (1997)
Fracture mechanics-based model of abrasive waterjet cutting for brittle materialsThe International Journal of Advanced Manufacturing Technology, 13
M. Junkar, B. Jurisevic, M. Fajdiga, M. Grah (2006)
FINITE ELEMENT ANALYSIS OF SINGLE-PARTICLE IMPACT IN ABRASIVE WATER JET MACHININGInternational Journal of Impact Engineering, 32
(2015)
Federov, et al., “Effect of air-abrasive treatment on operating properties of objects mad of oxide-carbide ceramic,
Hua Liu, Jun Wang, N. Kelson, Richard Brown (2003)
CFD simulation and mathematical models of the abrasive waterjet characteristics
Jun Wang (2003)
The Effects of the Jet Impact Angle on the Cutting Performance in AWJ Machining of Alumina CeramicsKey Engineering Materials, 238-239
(2015)
Analysis of the reliability of ceramic components after hydroabrasive treatment , Novye Ogneupory
D. Srinivasu, D. Axinte, P. Shipway, J. Folkes (2009)
Influence of kinematic operating parameters on kerf geometry in abrasive waterjet machining of silicon carbide ceramicsInternational Journal of Machine Tools & Manufacture, 49
S. Grigor'ev, V. Kuzin, S. Fedorov, K. Veprintsev, N. Portnoi, I. Sazanov (2015)
Model of the Formation of the Profile of a Cut in the Hydroabrasive Machining of a High-Density CeramicRefractories and Industrial Ceramics, 56
Jun Wang (2009)
A new model for predicting the depth of cut in abrasive waterjet contouring of alumina ceramicsJournal of Materials Processing Technology, 209
R. Deam, E. Lemma, D. Ahmed (2004)
Modelling of the abrasive water jet cutting processWear, 257
L. Chen, E. Siores, W. Wong (1998)
Optimising abrasive waterjet cutting of ceramic materialsJournal of Materials Processing Technology, 74
Hua Liu, Jun Wang, N. Kelson, Richard Brown (2004)
A study of abrasive water jet characteristics by CFD simulation
Results are given for modeling the stress-strained state of an oxide-carbide surface layer with jet-abrasive treatment using a developed research method of system combination. Stress and strain are analyzed in Al2O3–MgO system ceramic under action of different loads. The possibility is determined of using the dependences revealed for constructing a model of ceramic surface formation during jet-abrasive treatment.
Refractories and Industrial Ceramics – Springer Journals
Published: Jun 2, 2016
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.