Access the full text.
Sign up today, get DeepDyve free for 14 days.
Jianjun Yang, Y. Zhao, Xiao-nong Zhu (2007)
Theoretical studies of ultrafast ablation of metal targets dominated by phase explosionApplied Physics A, 89
Benxin Wu, Y. Shin (2007)
A simple model for high fluence ultra-short pulsed laser metal ablationApplied Surface Science, 253
S. Anisimov, B. Kapeliovich, T. Perelman (1974)
Electron emission from metal surfaces exposed to ultrashort laser pulsesJournal of Experimental and Theoretical Physics
Song Wang, Yunpeng Ren, Chung-Wei Cheng, J. Chen, D. Tzou (2013)
Micromachining of copper by femtosecond laser pulsesApplied Surface Science, 265
N. Nedialkov, P. Atanasov, D. Breitling, G. Heusel, F. Dausinger (2004)
Ablation of metals by ultrashort laser pulses, 5830
S. Kirkwood, A. Popta, Y. Tsui, R. Fedosejevs (2005)
Single and multiple shot near-infrared femtosecond laser pulse ablation thresholds of copperApplied Physics A, 81
R. Harzic, D. Breitling, M. Weikert, S. Sommer, C. Föhl, S. Valette, C. Donnet, É. Audouard, F. Dausinger (2005)
Pulse width and energy influence on laser micromachining of metals in a range of 100 fs to 5 psApplied Surface Science, 249
P. Gonzales, R. Bernath, J. Duncan, T. Olmstead, M. Richardson (2004)
Femtosecond ablation scaling for different materials, 5458
M. Hashida, A. Semerok, O. Gobert, G. Petite, Y. Izawa, J. Wagner (2002)
Ablation threshold dependence on pulse duration for copperApplied Surface Science, 197
Xin Zhao, Y. Shin (2013)
Femtosecond laser ablation of aluminum in vacuum and air at high laser intensityApplied Surface Science, 283
J. Colombier, P. Combis, F. Bonneau, R. Harzic, É. Audouard (2005)
Hydrodynamic simulations of metal ablation by femtosecond laser irradiationPhysical Review B, 71
Zhanliang Sun, M. Lenzner, W. Rudolph (2015)
Generic incubation law for laser damage and ablation thresholdsJournal of Applied Physics, 117
J. Cheng, W. Perrie, M. Sharp, S. Edwardson, N. Semaltianos, G. Dearden, K. Watkins (2009)
Single-pulse drilling study on Au, Al and Ti alloy by using a picosecond laserApplied Physics A, 95
P. Mannion, J. Magee, E. Coyne, G. O'Connor, T. Glynn (2004)
The effect of damage accumulation behaviour on ablation thresholds and damage morphology in ultrafast laser micro-machining of common metals in airApplied Surface Science, 233
Chung-Wei Cheng, Song Wang, K. Chang, J. Chen (2016)
Femtosecond laser ablation of copper at high laser fluence: Modeling and experimental comparisonApplied Surface Science, 361
Y. Miyasaka, M. Hashida, T. Nishii, S. Inoue, S. Sakabe (2015)
Derivation of effective penetration depth of femtosecond laser pulses in metal from ablation rate dependence on laser fluence, incidence angle, and polarizationApplied Physics Letters, 106
J. Liu (1982)
Simple technique for measurements of pulsed Gaussian-beam spot sizes.Optics letters, 7 5
J. Byskov-Nielsen, J. Savolainen, M. Christensen, P. Balling (2011)
Ultra-short pulse laser ablation of copper, silver and tungsten: experimental data and two-temperature model simulationsApplied Physics A, 103
Chung-Wei Cheng, Xian-Zhe Tsai, J. Chen (2016)
Micromachining of stainless steel with controllable ablation depth using femtosecond laser pulsesThe International Journal of Advanced Manufacturing Technology, 85
S. Wang, Yunpeng Ren, K. Chang, Chung-Wei Cheng, J. Chen, D. Tzou (2014)
Ablation of Copper by a Single Ultrashort Laser PulseJournal of Laser Micro Nanoengineering, 9
J. Byskov-Nielsen, J. Savolainen, M. Christensen, P. Balling (2010)
Ultra-short pulse laser ablation of metals: threshold fluence, incubation coefficient and ablation ratesApplied Physics A, 101
This study investigated ablation from a copper metal surface using a scanning femtosecond laser beam with a Gaussian beam profile. A method was developed herein to calculate the ablation profile with experimentally identified parameters (e.g., effective focused Gaussian incident beam radius, ablation threshold fluence, effective energy penetration depth). The results show the relationship between the maximum ablation depth and maximum ablation width. The calculated ablation profile agrees well with the experimental measurements.
The International Journal of Advanced Manufacturing Technology – Springer Journals
Published: Feb 20, 2017
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.