Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

A Review of Texture Evolution Mechanisms During Deformation by Rolling in AluminumAlloys

A Review of Texture Evolution Mechanisms During Deformation by Rolling in AluminumAlloys The current understanding of texture evolution during deformation by rolling in aluminum alloys was summarized. This included understanding the evolution mechanisms and several key factors of initial texture, microstructure, alloy composition, deformation temperature, stress–strain condition, and rolling geometry. Related models on predicting texture evolution during rolling were also discussed. Finally, for this research field, the recommendations for controlling the formation of rolling textures were proposed. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Journal of Materials Engineering and Performance Springer Journals

A Review of Texture Evolution Mechanisms During Deformation by Rolling in AluminumAlloys

Download PDF
24 pages

Loading next page...
 
/lp/springer_journal/a-review-of-texture-evolution-mechanisms-during-deformation-by-rolling-LroMlNsMPq
Publisher
Springer Journals
Copyright
Copyright © 2018 by ASM International
Subject
Materials Science; Characterization and Evaluation of Materials; Tribology, Corrosion and Coatings; Quality Control, Reliability, Safety and Risk; Engineering Design
ISSN
1059-9495
eISSN
1544-1024
DOI
10.1007/s11665-018-3439-y
Publisher site
See Article on Publisher Site

Abstract

The current understanding of texture evolution during deformation by rolling in aluminum alloys was summarized. This included understanding the evolution mechanisms and several key factors of initial texture, microstructure, alloy composition, deformation temperature, stress–strain condition, and rolling geometry. Related models on predicting texture evolution during rolling were also discussed. Finally, for this research field, the recommendations for controlling the formation of rolling textures were proposed.

Journal

Journal of Materials Engineering and Performance – Springer Journals

Published: Jun 1, 2018

References

  • A Crystallographic Mechanism For Fatigue Crack Propagation Through Grain Boundaries
    Zhai, T; Wilkinson, AJ; Martin, JW
  • Four-Point-Bend Fatigue of AA 2026 Aluminum Alloys
    Li, JX; Zhai, T; Garratt, MD; Bray, GH
  • The Grain Boundary Geometry for Optimum Resistance to Growth of Short Fatigue Cracks in High Strength Al-Alloys
    Zhai, T; Jiang, XP; Li, JX; Garratt, MD; Bray, GH
  • Mechanisms for Goss-Grains Induced Crack Deflection and Enhanced Fatigue Crack Propagation Resistance in Fatigue Stage II of an AA2524 Alloy
    Liu, ZY; Li, FD; Xia, P; Bai, S; Gu, YX; Yu, DE; Zeng, SM
  • Slip Band Formation in Plastic Deformation Zone at Crack Tip in Fatigue Stage II of 2xxx Aluminum Alloys
    Li, FD; Liu, ZY; Wu, WT; Zhao, Q; Bai, S; Wang, XH; Fan, GH
  • On the Role Of Texture In Governing Fatigue Crack Propagation Behavior of 2524 Aluminum Alloy
    Li, FD; Liu, ZY; Wu, WT; Xia, P; Ying, PY; zhao, Q; Li, JL; Bai, S; Ye, CW
  • Texture and Mechanical Property Anisotropy in an Al–Mg–Si–Cu Alloy
    Singh, RK; Singh, AK; Prasad, NE
  • Evolution of Texture in AA6111 Aluminum Alloy After Asymmetric Rolling with Various Velocity Ratios Between Top and Bottom Rolls
    Jin, H; Lloyd, DJ
  • Effect of Deformation Condition on Plastic Anisotropy of as-Rolled 7050 Aluminum Alloy Plate
    Wang, XY; Hu, HE; Xia, JC
  • The Dependence Of Microstructure, Texture Evolution and Mechanical Properties of Al-Mg-Si-Cu Alloy Sheet on Final Cold Rolling Deformation
    Wang, X; Guo, M; Zhang, Y; Xing, H; Li, Y; Luo, JR; Zhang, JS; Zhuang, LZ
  • Texture and Anisotropy in the Al-Mg Alloy AA 5005—part II Correlation of Texture and Anisotropic Properties
    Engler, O; Aegerter, J
  • Asymmetric Rolling of Strip-Cast Al-5.5 Mg-0.3Cu Alloy Sheet Effects on the Formability and Mechanical Properties
    Cheon, BH; Kim, HW; Lee, JC
  • Effect of Solution Time on Microstructure, Texture and Mechanical Properties of Al-Mg-Si-Cu Alloys
    Wang, X; Guo, M; Chapuis, A; Luo, JR; Zhang, JS; Zhuang, LZ
  • Comparison of Earing Behavior Between Continuous Cast and Direct Chill Cast AA 5182 Aluminum Alloys During Cold Rolling and Annealing
    Li, J; Liu, WC; Yuan, H; Gao, YK
  • Shear Texture Gradient in AA6061 Aluminum Alloy Processed by Accumulative Roll Bonding with High Roll Roughness
    Su, LH; Cheng, L; Gazder, AA; Saleh, AA; Deng, GY; Tiet, K; Li, HJ
  • Microstructural and Crystallographic Aspects of Conventional and Asymmetric Rolling Processes
    Sidor, J; Miroux, A; Petrov, R; Kestens, L
  • Substructure Drag Effects and Recrystallization Textures in Aluminum
    Higginson, R; Bate, P
  • Deformation of Cube-Oriented Grains and Formation of Recrystallized Cube Grains in a Hot Deformed Commercial AlMgMn Aluminium Alloy
    Vatne, HE; Shahani, R; Nes, E
  • Relationships Between Rolled Grain Shape, Deformation Bands, Microstructures and Recrystallization Textures in Al-5% Mg
    Chang, CST; Duggan, BJ
  • Texture Development in Al-1.8 wt% Cu Depending on the Precipitation State—II. Recrystallization Textures
    Engler, O; Hirsch, J; Lücke, K
  • On the Formation of Cube Texture In Aluminium
    Vatne, HE; Nes, E; Daaland, O
  • Origin of Cube Texture During Hot Rolling Of Commercial Al-Mn-Mg Alloys
    Dalland, O; Nes, E
  • Nucleation at Cube Bands During Recrystallisation in Commercial Al Alloy
    Sukhopar, O; Schã¤Fer, C; Gottstein, G
  • On the Origin Of Recrystallization Textures in Aluminium
    Hjelen, J; Ørsund, R; Nes, E
  • Effect of Hot and Cold Deformation on the P {011} < 455> Recrystallization Texture in a Continuous Cast Al-Mn-Mg Aluminum Alloy
    Liu, WC; Morris, JG
  • CXXVIII. A Theoretical Derivation of the Plastic Properties of a Polycrystalline Face-Centred Metal
    Bishop, JFW; Hill, R
  • Yield Surfaces for Textured Polycrystals—I
    Lequeu, P; Gilormini, P; Montheillet, F; Bacroix, B; Jonas, JJ
  • Texture Development in Al 1.8 wt% Cu Depending on the Precipitation State—I. Rolling Textures
    Engler, O; Hirsch, J; Lücke, K
  • Evolution of Texture, Micro Structure and Mechanical Property Anisotropy in an Al-Li-Cu Alloy
    Jata, KV; Panchanadeeswaran, S; Vasudevan, AK
  • Relevance Between Microstructure and Texture During Cold Rolling of AA3104 Aluminum Alloy
    Huang, YC; Liu, Y; Li, Q; Yang, CG
  • On the Relation Between the Crystal Orientation in Rolled Aluminum Sheet and the Thickness of the Sheet
    Varga, G; Wassermann, G
  • On penetration of Shear Texture into the Rolled Aluminum and Copper
    Truszkowski, W; Krol, J; Major, B
  • Foundation of Materials Science and Engineering
    Smith, WF; Hashemi, J
  • Overview no. 76 Mechanism of Deformation and Development of Rolling Textures in Polycrystalline f.c.c. metals—II. Simulation and Interpretation of Experiments on the Basis of Taylor-Type Theories
    Hirsch, J; Lücke, K
  • Slip Geometry in Partially Constrained Deformation
    Kocks, UF; Chandra, H
  • A Theoretical and Experimental Study of the Plastic Deformation of f.c.c. Crystals in Plane Strain Compression
    Skalli, A
  • XLVI. A Theory of the Plastic Distortion of a Polycrystalline Aggregate Under Combined Stresses
    Bishop, JFW; Hill, R
  • Deformation Banding Mechanisms During Plane Strain Compression of Cube-Oriented f.c.c. Crystals
    Basson, F; Driver, JH
  • Location-Dependent Lattice Rotation and Shear Strain in Rolled Aluminium Single Crystals of Cube and Goss Orientations
    Liu, Q; Wert, J; Hansen, N
  • Macroscopic and Microscopic Subdivison of a Cold-Rolled Aluminium Single Crystal of Cubic Orientation
    Liu, Q; Hansen, N
  • Deformation Microstructure and Orientation of f.c.c. Crystals
    Liu, Q; Hansen, N
  • The influence of Non-octahedral Slip on Texture Development in FCC Metals
    Bacroix, B; Jonas, JJ
  • The Mechanism of Influence of Non-octahedral Slip on Rolling Texture Development in FCC Metals
    Divinskii, SV; Dnieprenko, VN
  • Slip System Rheology of Al-1% Mn Crystals Deformed by Hot Plane Strain Compression
    Perocheau, F; Driver, JH
  • High Temperature Plane Strain Compression of Cube Oriented Aluminium Crystals
    Maurice, C; Driver, JH
  • Rolling Textures in f.c.c. and b.c.c. Metals
    Dillamore, IL; Roberts, WT
  • The Relation Between Polycrystal Deformation and Single-Crystal Deformation
    Kocks, UF
  • Theory of Orientation Gradients in Plastically Strained Crystals
    Raabe, D; Zhao, Z; Park, SJ; Roters, F
  • Texture Simulation for Hot Rolling of Aluminium by use of a Taylor Model Considering Grain Interactions
    Raabe, D
  • Comparison of Two Grain Interaction Models for Polycrystal Plasticity and Deformation Texture Prediction
    Van, HP; Delannay, L; Kalidindi, SR
  • Quantitative Prediction of Textures in Aluminium Cold Rolled to Moderate Strains
    Delannay, L; Kalidindi, SR; Houtte, PV
  • Alloy-Dependent Rolling Texture Simulation of Aluminium Alloys with a Grain-Interaction Model
    Engler, O; Crumbach, M; Li, S
  • Deformation Texture Prediction from the Taylor Model to the Advanced Lamel Model
    Houtte, PV; Li, S; Seefeldt, M; Delannay, L
  • Development of Texture During Cold Rolling in AA5182 Alloy
    Chowdhury, SG
  • Influence of Initial Microstructure on Texture and Earing in Aluminium Sheet After Cold Rolling and Annealing
    Oscarsson, A; Hutchinson, WB; Ekström, HE
  • Influence of Deformation Variables on the Formation of Copper-Type SHEAR Bands in Al-1Mg
    Duckham, A; Knutsen, RD; Engler, O
  • Influence of Precipitates on the Rolling Texture Development in (011)[100] Oriented Al-Cu and Al-Mn Single Crystals
    Kong, XW; Engler, O; Lücke, K
  • Comparison of the Texture Evolution in Cold Rolled DC and SC AA 5182 Aluminum Alloys
    Liu, WC; Morris, JG
  • Texture Evolution of Polycrystalline AA 5182 Aluminum Alloy with an Initial {001} <110> Texture During Rolling
    Liu, WC; Morris, JG
  • Lattice Rotation and Stability of 22.5° ND Rotated Cube Orientation in Cold Rolled Polycrystalline AA 5182 Aluminum Alloy
    Liu, WC; Morris, JG
  • Effect of Initial Texture on Texture Evolution in Cold-Rolled AA 5182 Aluminum Alloy
    Liu, WC; Zhai, T; Man, CS; Radhakrishnan, B; Morris, JG
  • Texture Evolution of Continuous Cast and Direct Chill Cast AA 3003 Aluminum Alloys During Cold Rolling
    Liu, WC; Zhai, T; Morris, JG
  • Orientation Splitting of Cube-Oriented Face-Centred Cubic Crystals in Plane Strain Compression
    Akef, A; Driver, JH
  • Slip Pattern, Microstructure and Local Crystallography in an Aluminium Single Crystal of Copper Orientation {112} <111>
    Godfrey, A; Jensen, DJ; Hansen, N
  • Macroscopic Subdivision of Columnar Grain Aluminium with {001}  Orientations Following Low Strain
    Wu, GL; Godfrey, A; Liu, W; Liu, Q
  • Analysis of an Aluminum Single Crystal with Unstable Initial Orientation (001) [110] in Channel Die Compression
    Becker, R; Butler, JF; Hu, H; Lalli, LA
  • Macroscopic Sub-Division of Rolled Al-1% Mn Single Crystals of 001 Orientation
    Li, ZJ; Godfrey, A; Liu, Q
  • Development of Shear Bands in f.c.c. Single Crystals
    Morii, K; Mecking, H; Nakayama, Y
  • Study on the Orientational Stability of Cube-Oriented FCC Crystals Under Plane Strain by Use of a Texture Component Crystal Plasticity Finite Element Method
    Raabe, D; Zhao, Z; Roters, F
  • Macro-, Micro- and Mesotexture Evolutions of Continuous Cast and Direct Chill Cast AA 3105 Aluminum Alloy During Cold Rolling
    Liu, J; Morris, JG
  • The effect of Textures and Grain Shape on the Shear Band Formation in Rolled F.C.C. Metals
    Chang, SC; Hou, DH; Chang, YK
  • The Texture and Formation of Shear Bands in a Hot Rolled 7050 Aluminum Alloy
    Chang, SC; Jiang, QD; Hu, JR; Chen, FR
  • Dislocation Boundary Structure from Low to Medium Strain of Cold Rolling AA3104 Aluminum Alloy
    Yao, Z; Huang, G; Godfrey, A; Liu, W; Liu, Q
  • Comparison of Texture Evolution During Cold Rolling Between Direct Chill and Continuous Cast Aluminium Alloy 5052
    Zhao, YM; Liu, WC; Morris, JG
  • Effect of Reduction Ratio on Annealing Texture and r-Value Directionality for a Cold-Rolled Al-5% Mg Alloy
    Choi, SH; Choi, JK; Kim, HW; Kang, SB
  • Effect of Strain Hardening on Texture Development in Cold Rolled Al-Mg Alloy
    Liu, WC; Man, CS; Raabe, D
  • A method for the Determination of the Active Slip Systems And Orientation Changes During Single Crystal Deformation
    Honneff, H; Mecking, H
  • Overview no. 76: Mechanism of Deformation and Development of Rolling Textures in Polycrystalline f.c.c. metals—I. Description of Rolling Texture Development in Homogeneous CuZn Alloys
    Hirsch, J; Lücke, K
  • Texture and Grain-Boundary Evolutions of Continuous Cast and Direct Chill Cast AA 5052 Aluminum Alloy During Cold Rolling, Metall
    Liu, J; Morris, JG
  • Effect of Composition on Crystallographic Texture in Hot-Rolled Al-Li-Cu Alloys
    Vasudévan, AK; Przystupa, MA; Fricke, WG
  • Effect of Hot and Cold Deformation on the β Fiber Rolling Texture in Continuous Cast AA 5052 Aluminum Alloy
    Liu, WC; Morris, JG
  • Microstructure and Local Texture in Hot Rolled Aluminum
    Weiland, H; Hirsch, JR
  • Glide of Dislocations in Non-octahedral Planes of FCC metals: A Review
    Caillard, D; Martin, JL
  • Hot Rolling Textures of f.c.c. Metals—Part I. Experimental Results on Al Single and Polycrystals
    Maurice, C; Driver, JH
  • Hot Rolling Textures of f.c.c. Metals—Part II. Numerical Simulations
    Maurice, C; Driver, JH
  • Analysis of the Activity of 110 <110> Slip in AA3103 by Inverse Modeling
    Crumbach, M; Gottstein, G
  • Evolution of the Brass Texture in an Al-Cu-Mg Alloy During Hot Rolling
    Zhao, Q; Liu, ZY; Li, SS; Huang, TT; Xia, P; Lu, LQ
  • Hot Rolling Textures of Al-Cu-Li and Al-Zn-Mg-Cu Aeronautical Alloys: Experiments and Simulations to High Strains
    Contrepois, Q; Maurice, C; Driver, JH
  • Development of the “Brass” Texture Component During the Hot Deformation of Al-6 Cu-0.4 Zr
    Bate, PS; Huang, Y; Humphreys, FJ
  • The Influence of Temperature on the Rolling Textures of Al Alloys in the Absence of Recrystallization
    Bacroix, B; Brun, O; Chauveau, T
  • Systematic Study of Stacking Fault Energies of Random Al-Based Alloys
    Schulthess, TC; Turchi, PEA; Gonis, A; Nieh, TG
  • Inhomogeneity of Rolling Texture in fcc Metals
    Truszkowski, W; Kr’Ol, J; Major, B
  • Lattice Rotation of the Cube Orientation to the β Fiber During Cold Rolling of AA 5052 Aluminum Alloy
    Liu, WC; Man, CS; Morris, JG
  • Texture Development in High Strength Aluminium Alloys
    Bowen, AW
  • Quantitative Analysis of Texture Evolution in Cold-Rolled, Continuous-Cast AA 5xxx-Series Aluminum Alloys
    Liu, WC; Morris, JG
  • Influence of the Precipitation State on the Cold Rolling Texture in 8090 Al-Li Material
    Engler, O; Lücke, K
  • The Effect of Particles on Texture Evolution in Commercial AlMn
    Rickert, T; Guldberg, S; Furu, T; Nes, E; Lücke, K
  • Microstructure and Texture Evolution of Particle-Containing AA3104 Alloy Cold Rolled to Large Strains
    Yao, ZY; Zhang, ZQ; Godfrey, A; Liu, W; Liu, Q
  • Effect of Precipitation on Rolling Texture Evolution in Continuous Cast AA 3105 Aluminum Alloy
    Liu, WC; Li, Z; Man, CS; Raabe, D; Morris, JG
  • Effect of Grain Shape on the Texture Evolution During Cold Rolling of Al-Mg Alloys
    Yuan, H; Wang, QF; Zhang, JW; Liu, WC; Gao, YK
  • Kinetics of the Formation of the β Fiber Rolling Texture in Continuous Cast AA 5xxx Series Aluminum Alloys
    Liu, WC; Morris, JG
  • Determination of Texture Distributions in Inhomogeneously Rolled Al Single Crystals Using a Topographical X-ray Method
    Kneijnsberg, HP; Verbraak, CA; Bouwhuijs, MJT
  • A Study of Through-Thickness Texture Gradients in Rolled Sheets
    Engler, O; Tomé, CN; Huh, MY
  • A Simple Theory for the Development of Inhomogeneous Rolling Textures
    Lee, CS; Duggan, BJ
  • Texture Distribution and Plane Strain Mechanical Behavior of AA 7xxx Plates of Different Thicknesses
    Becerra, G; Ramos-Grez, J; Montecinos, J
  • Influence of Friction and Geometry of Deformation on Texture Inhomogeneities During Rolling of Cu Single Crystals as an Example
    Asbeck, HO; Mecking, H
  • Through-Thickness Texture Variation in Cold-Rolled AA 5182 Aluminum Alloy with an Initial {001} <110> Texture
    Liu, WC; Morris, JG
  • Through-Thickness Texture Gradients in Cold-Rolled Aluminum
    Mishin, OV; Bay, B; Jensen, DJ
  • Through-Thickness Texture Gradient in AA 7055 Aluminum Alloy
    Chen, JZ; Zhen, L; Shao, WZ; Dai, SL; Cui, YX
  • Development of Microstructures and Texture During Cold Rolling in AA 7055 Aluminum Alloy
    Zhen, L; Chen, J; Yang, S; Shao, W; Dai, S
  • Analysis of Deformation Texture Inhomogeneity and Stability Condition of Shear Components in f.c.c. Metals
    Choi, CH; Kwon, JW; Oh, KH; Dong, NL
  • The Effect of Roll Gap Geometry on Microstructure in Cold-Rolled Aluminum
    Mishin, OV; Bay, B; Winther, G; Jensen, DJ
  • Texture, Microstructure, and Stored Energy Inhomogeneity in Cold Rolled Commercial Purity Aluminium and Copper
    Major, B
  • Through-Thickness Texture Gradient in Continuous Cast AA 5052 Aluminum Alloy Sheet
    Liu, WC; Radhakrishnan, B; Li, Z; Morris, JG
  • Comparison of Texture Evolution Between Different Thickness Layers in Cold Rolled Al-Mg Alloy
    Chen, MB; Li, J; Zhao, YM; Yuan, H; Liu, WC