Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

5th All-Russia Scientific and Engineering Conference “Ceramic Materials: Production and Applications”

5th All-Russia Scientific and Engineering Conference “Ceramic Materials: Production and... Refractories and Industrial Ceramics Vol. 44, No. 5, 2003 INFORMATION UDC 666.3,061.3 5th ALL-RUSSIA SCIENTIFIC AND ENGINEERING CONFERENCE “CERAMIC MATERIALS: PRODUCTION AND APPLICATIONS” 1 1 E. E. Grishenkov and E. S. Lukin Translated from Novye Ogneupory, No. 7, pp. 63 – 72, July, 2003. The 5th All-Russia Scientific and Engineering Confer- are used for synthesis of Si N -based materials. Studies on 3 4 ence was held 27 – 30 May 2003 in Moscow; the conference the synthesis of ceramic composites in the systems SiC – Cf, was organized under the auspices of the A. M. Prokhorov Si N – SiCf, and Cf using silicification and hot pressing 3 4 Academy of Engineering Sciences, Space Academy, D. I. techniques are conducted. A technology for pressure molding Mendeleev University of Chemical Engineering, Center for and slip casting of wollastonite-based components was put in Powder Materials Science, State Missile Center Federal Uni- service. A wide range of raw materials available from do- tary State Enterprise, V. P. Makeev Design Office, Research mestic and foreign manufacturers — plasma CVD Center for Structural Composite Materials Mechanics at the ultradisperse Si N composites, finely dispersed ZrO -stabi- 3 4 2 Russian Academy of Sciences, http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Refractories and Industrial Ceramics Springer Journals

5th All-Russia Scientific and Engineering Conference “Ceramic Materials: Production and Applications”

Loading next page...
 
/lp/springer_journal/5th-all-russia-scientific-and-engineering-conference-ceramic-materials-apFmzAKnPD

References (0)

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

Publisher
Springer Journals
Copyright
Copyright © 2003 by Plenum Publishing Corporation
Subject
Materials Science; Characterization and Evaluation of Materials; Materials Science, general; Ceramics, Glass, Composites, Natural Materials
ISSN
1083-4877
eISSN
1573-9139
DOI
10.1023/B:REFR.0000009045.38055.c9
Publisher site
See Article on Publisher Site

Abstract

Refractories and Industrial Ceramics Vol. 44, No. 5, 2003 INFORMATION UDC 666.3,061.3 5th ALL-RUSSIA SCIENTIFIC AND ENGINEERING CONFERENCE “CERAMIC MATERIALS: PRODUCTION AND APPLICATIONS” 1 1 E. E. Grishenkov and E. S. Lukin Translated from Novye Ogneupory, No. 7, pp. 63 – 72, July, 2003. The 5th All-Russia Scientific and Engineering Confer- are used for synthesis of Si N -based materials. Studies on 3 4 ence was held 27 – 30 May 2003 in Moscow; the conference the synthesis of ceramic composites in the systems SiC – Cf, was organized under the auspices of the A. M. Prokhorov Si N – SiCf, and Cf using silicification and hot pressing 3 4 Academy of Engineering Sciences, Space Academy, D. I. techniques are conducted. A technology for pressure molding Mendeleev University of Chemical Engineering, Center for and slip casting of wollastonite-based components was put in Powder Materials Science, State Missile Center Federal Uni- service. A wide range of raw materials available from do- tary State Enterprise, V. P. Makeev Design Office, Research mestic and foreign manufacturers — plasma CVD Center for Structural Composite Materials Mechanics at the ultradisperse Si N composites, finely dispersed ZrO -stabi- 3 4 2 Russian Academy of Sciences,

Journal

Refractories and Industrial CeramicsSpringer Journals

Published: Oct 17, 2004

There are no references for this article.