Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Tri-directional Floor Response Spectra in Irregular Building

Tri-directional Floor Response Spectra in Irregular Building The non-structural components play a vital role in industrial buildings. The past study indicates that the non-structural components damage loss surpass the structural damage loss. As a result, after an earthquake in critical, essential, and lifeline buildings, non-structural components that must be in operational conditions are essential. Industrial buildings accommodate a wide range of processes and provide workers with the necessary equipment for efficient industrial operations. The centre of mass and the centre of stiffness or rigidity in the building do not align because of the irregular distribution of floor mass, inducing torsion in the building. According to Indian Standard (IS 1893-part 4:2015), linear time history analysis with design basis earthquake is required to generate floor response spectra for use in non-structural component design. Thus, linear time history analysis was initially performed to generate floor response spectra, and then work was extended with nonlinear time history analysis. The primary goal of this present study is to focus on the impact of torsional irregularity on the floor response continuum with tri-directional earthquake time histories. Regular and torsional irregular buildings with G + 2 storeys are considered for this. The building location is considered in the highest seismic zone in India and positioned on medium soil. The study concluded that torsional irregularity in the structure resulted in floor response spectra in the two orthogonal horizontal and vertical directions with significant design forces for each direction of earthquake excitation. Thus, the structural designer must employ these three direction response spectra for precise and protective non-structural support design. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Journal of The Institution of Engineers (India):Series A Springer Journals

Tri-directional Floor Response Spectra in Irregular Building

Download PDF
13 pages

Loading next page...
 
/lp/springer-journals/tri-directional-floor-response-spectra-in-irregular-building-XUg1EyUGzR
Publisher
Springer Journals
Copyright
Copyright © The Institution of Engineers (India) 2022
ISSN
2250-2149
eISSN
2250-2157
DOI
10.1007/s40030-021-00600-6
Publisher site
See Article on Publisher Site

Abstract

The non-structural components play a vital role in industrial buildings. The past study indicates that the non-structural components damage loss surpass the structural damage loss. As a result, after an earthquake in critical, essential, and lifeline buildings, non-structural components that must be in operational conditions are essential. Industrial buildings accommodate a wide range of processes and provide workers with the necessary equipment for efficient industrial operations. The centre of mass and the centre of stiffness or rigidity in the building do not align because of the irregular distribution of floor mass, inducing torsion in the building. According to Indian Standard (IS 1893-part 4:2015), linear time history analysis with design basis earthquake is required to generate floor response spectra for use in non-structural component design. Thus, linear time history analysis was initially performed to generate floor response spectra, and then work was extended with nonlinear time history analysis. The primary goal of this present study is to focus on the impact of torsional irregularity on the floor response continuum with tri-directional earthquake time histories. Regular and torsional irregular buildings with G + 2 storeys are considered for this. The building location is considered in the highest seismic zone in India and positioned on medium soil. The study concluded that torsional irregularity in the structure resulted in floor response spectra in the two orthogonal horizontal and vertical directions with significant design forces for each direction of earthquake excitation. Thus, the structural designer must employ these three direction response spectra for precise and protective non-structural support design.

Journal

Journal of The Institution of Engineers (India):Series A – Springer Journals

Published: Mar 1, 2022

Keywords: Non-structural component; Time history dynamic analysis; Floor response spectra; Torsional irregularity

References

  • Seismic performance of non-structural elements during the 2016 Central Italy earthquake
    Perrone, D; Calvi, PM; Nascimbene, R; Fischer, EC; Magliulo, G
  • Dynamics of elastic-plastic shear frames with secondary structures: Shake table and numerical studies
    Adam, C
  • Response of multiple-supported secondary system on torsionally coupled yielding primary system
    Agarwal, AK; Datta, TK
  • A ground motion selection algorithm based on the generalized condition intensity measure approach
    Bradley, BA
  • Spectrum-to-spectrum methods for the generation of elastic floor acceleration spectra
    Lucchini, A; Franchin, P; Mollaioli, F
  • Definition of seismic input for out-of-plane response of masonry walls: II. Formulation
    Menon, A; Magenes, G
  • Stochastic prediction of maximum seismic response of light secondary systems
    Singh, AK; Ang, AH
  • Seismic design input for secondary systems
    Singh, MP
  • Floor spectra of inelastic RC frame buildings considering ground motion characteristics
    Surana, M; Singh, Y; Lang, DH
  • A method for the direct determination of approximate floor response spectra for SDOF inelastic structures
    Vukobratovic, V; Fajfar, P
  • Floor response spectra for light components mounted on regular moment-resisting frame structures
    Medina, RA; Sankaranarayanan, R; Kingston, KM
  • Seismic design forces I: Rigid non-structural components
    Singh, MP; Moreschi, LM; Suarez, LE; Matheu, EE
  • Seismic design forces I: flexible non-structural components
    Singh, MP; Moreschi, LM; Suarez, LE; Matheu, EE
  • Dynamic analysis of light equipment in structures: response to stochastic input
    Der Kiureghian, A; Sackman, J; Nour-Omid, B
  • Dynamic characterization of two-degree-of-freedom equipment-structure systems
    Igusa, T; Der Kiureghian, A
  • Generation of seismic floor spectra
    Singh, M
  • Effect of building nonlinearity on seismic response of non-structural components: a parametric study
    Chauduri, SR; Villaverde, R
  • Floor spectra of MDOF nonlinear structures
    Politopoulos, I
  • Seismic response of secondary systems
    Chen, YQ; Soong, TT
  • Seismic design considerations for secondary structural systems
    Lai, ML; Soong, TT
  • Seismic design of secondary structures: state of the art
    Villaverde, R
  • Effect of building performance on floor response spectra
    Kumar, R; Singh, Y; Tripathi, S
  • Floor response spectra with structure–equipment interaction effects by a mode synthesis approach
    Suarez, LE; Singh, MP
  • Code-based record selection methods for seismic performance assessment of buildings
    Araujo, M; Macedo, L; Marques, M; Castro, JM
  • Seismic demand sensitivity of reinforced concrete structures to ground motion selection and modification methods
    Cantagallo, C; Camata, G; Spacone, E
  • Selection of earthquake ground motion records: A state-of-the-art review from a structural engineering perspective
    Katsanos, EI; Sextos, AG; Manolis, GD
  • A critical examination of seismic response uncertainty analysis in earthquake engineering
    Bradley, BA
  • Assessing adequacy of spectrum-matched ground motions for response history analysis
    Grant, DN; Diaferia, R
  • Numbers of scaled and matched accelerograms required for inelastic dynamic analyses
    Hancock, J; Bommer, JJ; Stafford, PJ
  • The effect of stiffened floor and roof diaphragms on the experimental seismic response of a full-scale unreinforced stone masonry building
    Senaldi, I; Magenes, G; Penna, A; Galasco, A; Rota, M
  • Conditional mean spectrum: tool for ground-motion selection
    Baker, JW
  • The use of real earthquake accelerogram as input to dynamic analysis
    Bommer, JJ; Acevedo, AB
  • Seismic drift and ductility demands and their dependence on ground motions
    Krawinkler, H; Medina, R; Alavi, B
  • Performance assessment of RC frame designed using force, displacement and energy-based approach
    Kumbhar, OG; Kumar, R
  • Comparative study of floor response spectra for regular and irregular buildings subjected to earthquake
    Landge, MV; Ingle, RK
  • Floor response spectra for seismic design of operational and functional components of concrete buildings in Canada
    Shooshtari, M; Saatcioglu, M; Naumoski, N; Foo, S
  • Earthquake induced floor horizontal accelerations in buildings
    Rodriguez, ME; Restrepo, JI; Carr, AJ
  • Seismic actions on acceleration sensitive non-structural components in ductile frames
    Uma, SR; Zhao, JX; King, AB
  • Effect of the seismic input on non-linear response of R/C building structures
    Maddaloni, G; Magliulo, G; Cosenza, E
  • Floor response spectra in RC frame structures designed according to Eurocode 8
    Petrone, C; Magliulo, G; Manfredi, G
  • Elastic floor response spectra of nonlinear frame structures subjected to forward-directivity pulses of near-fault records
    Kanee, ART; Kani, IMZ; Noorzad, A
  • Acceleration response modification factors for nonstructural components attached to inelastic moment-resisting frame structures
    Sankaranarayanan, R; Medina, RA
  • Reinforced concrete response to simulated earthquakes
    Takeda, T; Sozen, MA; Nielsen, NN