Access the full text.
Sign up today, get DeepDyve free for 14 days.
Giancarlo Banda, S. Moraes, A. Motheo, S. Machado (2009)
Anticorrosive cerium-based coatings prepared by the sol–gel methodJournal of Sol-Gel Science and Technology, 52
L. Palomino, P. Suegama, I. Aoki, M. Montemor, H. Melo (2009)
Electrochemical study of modified cerium-silane bi-layer on Al alloy 2024-T3Corrosion Science, 51
P. Hammer, Fábio Santos, B. Cerrutti, S. Pulcinelli, C. Santilli (2012)
Highly corrosion resistant siloxane-polymethyl methacrylate hybrid coatingsJournal of Sol-Gel Science and Technology, 63
T. Peng, Rui-lin Man (2009)
Rare earth and silane as chromate replacers for corrosion protection on galvanized steelJournal of Rare Earths, 27
F. Deflorian, S. Rossi, M. Fedel, C. Motte (2010)
Electrochemical investigation of high-performance silane sol-gel films containing clay nanoparticlesProgress in Organic Coatings, 69
R. Naderi, M. Attar (2008)
Electrochemical assessing corrosion inhibiting effects of zinc aluminum polyphosphate (ZAPP) as a modified zinc phosphate pigmentElectrochimica Acta, 53
F. Deflorian, S. Rossi, L. Fedrizzi, M. Fedel (2008)
Integrated electrochemical approach for the investigation of silane pre-treatments for painting copperProgress in Organic Coatings, 63
J. Bajat, V. Mišković‐Stanković (2004)
Protective properties of epoxy coatings electrodeposited on steel electrochemically modified by Zn–Ni alloysProgress in Organic Coatings, 49
R. Cottis (2001)
Interpretation of Electrochemical Noise DataCorrosion, 57
Anne-Pascale Romano, M. Fedel, F. Deflorian, M. Olivier (2011)
Silane sol–gel film as pretreatment for improvement of barrier properties and filiform corrosion resistance of 6016 aluminium alloy covered by cataphoretic coatingProgress in Organic Coatings, 72
M. Montemor, R. Pinto, M. Ferreira (2009)
Chemical composition and corrosion protection of silane films modified with CeO2 nanoparticlesElectrochimica Acta, 54
R. Naderi, M. Attar (2009)
EIS and ENM as tools to evaluate inhibitive performance of second generation of phosphate-based anticorrosion pigmentsJournal of Applied Electrochemistry, 39
A. Cabral, R. Duarte, M. Montemor, M. Ferreira (2005)
A comparative study on the corrosion resistance of AA2024-T3 substrates pre-treated with different silane solutions Composition of the films formedProgress in Organic Coatings, 54
J. Kearns, J. Scully, P. Roberge, D. Reichert, J. Dawson (1996)
Electrochemical noise measurement for corrosion applications
S. Rehim, H. Hassan, M. Amin (2004)
Corrosion inhibition study of pure Al and some of its alloys in 1.0 M HCl solution by impedance techniqueCorrosion Science, 46
J. Gandhi, Tammy Metroke, M. Eastman, W. Ooij, A. Apblett (2006)
Effect of the Degree of Hydrolysis and Condensation of Bis-[Triethoxysilylpropyl]Tetrasulfide on the Corrosion Protection of Coated Aluminum Alloy 2024-T3Corrosion, 62
A. Franquet, C. Pen, H. Terryn, J. Vereecken (2003)
Effect of bath concentration and curing time on the structure of non-functional thin organosilane layers on aluminiumElectrochimica Acta, 48
P. Suegama, A.A.C. Recco, A. Tschiptschin, I. Aoki (2007)
Influence of silica nanoparticles added to an organosilane film on carbon steel electrochemical and tribological behaviourProgress in Organic Coatings, 60
S. Lamaka, M. Montemor, A. Galio, M. Zheludkevich, C. Trindade, L. Dick, M. Ferreira (2008)
Novel hybrid sol-gel coatings for corrosion protection of AZ31B magnesium alloyElectrochimica Acta, 53
B. Chico, D. Fuente, M. Pérez, M. Morcillo (2010)
Corrosion resistance of steel treated with different silane/paint systemsJournal of Coatings Technology and Research, 9
R. Naderi, M. Mahdavian, M. Attar (2009)
Electrochemical behavior of organic and inorganic complexes of Zn(II) as corrosion inhibitors for mild steel: Solution phase studyElectrochimica Acta, 54
(2004)
Characterization of a high solid coating by EIS and ENM
Jing Chen, W. Bogaerts (1995)
The physical meaning of noise resistanceCorrosion Science, 37
G. Bierwagen, R. Brown, Dante Battocchi, S. Hayes (2010)
Active metal-based corrosion protective coating systems for aircraft requiring no-chromate pretreatment ☆Progress in Organic Coatings, 67
A. Phanasgaonkar, V. Raja (2009)
Influence of curing temperature, silica nanoparticles- and cerium on surface morphology and corrosion behaviour of hybrid silane coatings on mild steelSurface & Coatings Technology, 203
T. Chou, C. Chandrasekaran, G. Cao (2003)
Sol-Gel-Derived Hybrid Coatings for Corrosion ProtectionJournal of Sol-Gel Science and Technology, 26
R. Naderi, M. Fedel, F. Deflorian, M. Poelman, M. Olivier (2013)
Synergistic effect of clay nanoparticles and cerium component on the corrosion behavior of eco-friendly silane sol–gel layer applied on pure aluminumSurface & Coatings Technology, 224
W. Trabelsi, P. Cecílio, M. Ferreira, M. Ferreira, M. Montemor (2005)
Electrochemical assessment of the self-healing properties of Ce-doped silane solutions for the pre-treatment of galvanised steel substratesProgress in Organic Coatings, 54
T. Schaftinghen, C. Pen, H. Terryn, F. Hörzenberger (2004)
Investigation of the barrier properties of silanes on cold rolled steelElectrochimica Acta, 49
P. Schweitzer (2005)
Paint and Coatings: Applications and Corrosion Resistance
Dinesh Balgude, A. Sabnis (2012)
Sol–gel derived hybrid coatings as an environment friendly surface treatment for corrosion protection of metals and their alloysJournal of Sol-Gel Science and Technology, 64
W. Ooij, Danqing Zhu, Matthew Stacy, A. Seth, T. Mugada, J. Gandhi, P. Puomi (2005)
Corrosion Protection Properties of Organofunctional Silanes—An OverviewTsinghua Science & Technology, 10
R. Naderi, M. Attar (2009)
Application of the electrochemical noise method to evaluate the effectiveness of modification of zinc phosphate anticorrosion pigmentCorrosion Science, 51
B. Chico, Juan Galván, D. Fuente, M. Morcillo (2007)
Electrochemical impedance spectroscopy study of the effect of curing time on the early barrier properties of silane systems applied on steel substratesProgress in Organic Coatings, 60
P. Banerjee, R. Raman (2011)
Electrochemical impedance spectroscopic investigation of the role of alkaline pre-treatment in corrosion resistance of a silane coating on magnesium alloy, ZE41Electrochimica Acta, 56
M. Mahdavian, R. Naderi (2011)
Corrosion inhibition of mild steel in sodium chloride solution by some zinc complexesCorrosion Science, 53
ShunXing Zheng, Jinhuan Li (2010)
Inorganic–organic sol gel hybrid coatings for corrosion protection of metalsJournal of Sol-Gel Science and Technology, 54
(2005)
Image of a water drop on the surface of hybrid coatings formed in the silane solutions with pH
M. Montemor, M. Ferreira (2007)
Cerium salt activated nanoparticles as fillers for silane films: Evaluation of the corrosion inhibition performance on galvanised steel substratesElectrochimica Acta, 52
I. Graeve, E. Tourwé, M. Biesemans,, R. Willem,, H. Terryn (2008)
Silane solution stability and film morphology of water-based bis-1,2-(triethoxysilyl)ethane for thin-film deposition on aluminiumProgress in Organic Coatings, 63
V. Palanivel, Yuhong Huang, W. Ooij (2005)
Effects of addition of corrosion inhibitors to silane films on the performance of AA2024-T3 in a 0.5 M NaCl solutionProgress in Organic Coatings, 53
(2001)
Colloid Surf A 176:253–266
G. Kong, Jin-tang Lu, Hai-jiang Wu (2009)
Post treatment of silane and cerium salt as chromate replacers on galvanized steelJournal of Rare Earths, 27
F. Zanotto, V. Grassi, A. Frignani, F. Zucchi (2011)
Protection of the AZ31 magnesium alloy with cerium modified silane coatingsMaterials Chemistry and Physics, 129
H. Fan, Shuying Li, Zongchang Zhao, Hua Wang, Zhicong Shi, Lin Zhang (2011)
Inhibition of brass corrosion in sodium chloride solutions by self-assembled silane filmsCorrosion Science, 53
M. Fedel (2009)
Environmentally friendly hybrid coatings for corrosion protection: silane based pre-treatments and nanostructured waterborne coatings
F. Brusciotti, A. Batan, I. Graeve, M. Wenkin, M. Biessemans, R. Willem,, F. Reniers, J. Pireaux, M. Piens, J. Vereecken, H. Terryn (2010)
Characterization of thin water-based silane pre-treatments on aluminium with the incorporation of nano-dispersed CeO2 particlesSurface & Coatings Technology, 205
T. Muster, C. Prestidge, R. Hayes (2001)
Water adsorption kinetics and contact angles of silica particlesColloids and Surfaces A: Physicochemical and Engineering Aspects, 176
V. Palanivel, Danqing Zhu, W. Ooij (2003)
Nanoparticle-filled silane films as chromate replacements for aluminum alloysProgress in Organic Coatings, 47
R. Naderi, M. Fedel, T. Urios, M. Poelman, M. Olivier, F. Deflorian (2013)
Optimization of silane sol–gel coatings for the protection of aluminium components of heat exchangersSurface and Interface Analysis, 45
I. Graeve, J. Vereecken, A. Franquet, T. Schaftinghen, H. Terryn (2007)
Silane coating of metal substrates: Complementary use of electrochemical, optical and thermal analysis for the evaluation of film propertiesProgress in Organic Coatings, 59
H. Emira, A. Shakour, S. Rehim, Inas Saleh, M. El-Hashemy (2012)
Evaluation of corrosion protection of carbon steel by anticorrosive paintsAnti-corrosion Methods and Materials, 59
L. Palomino, P. Suegama, I. Aoki, M. Montemor, H. Melo (2008)
Electrochemical study of modified non-functional bis-silane layers on Al alloy 2024-T3Corrosion Science, 50
R. Zand, K. Verbeken, A. Adriaens (2011)
The corrosion resistance of 316L stainless steel coated with a silane hybrid nanocomposite coatingProgress in Organic Coatings, 72
The effects of dipping duration in the silane solution and the sol pH on the protective performance of an eco-friendly silane sol–gel coating consisting a mixture of tetraethoxysilane, methyltriethoxysilane and glycidyloxypropyltrimethoxysilane applied on mild steel substrate were studied in this paper using electrochemical techniques and surface analysis. In consistency with the data obtained from electrochemical impedance spectroscopy and polarization curves, electrochemical current noise fluctuation analysis, appearance of the power spectral density plots and noise resistance indicated the most efficient sol pH and immersion time in the silane solution. In this regard, field emission type scanning electron microscopy images and water contact angle values revealed impact of the sol pH on the film structure. The enhancement in protective performance of the hybrid coating resulting from optimum immersion in the silane solution with appropriate pH was connected to the film homogeneity and higher cross linking and thickness as well. Moreover, a good trend correlation was observed between the noise resistance and low-frequency impedance modulus data.
Journal of Sol-Gel Science and Technology – Springer Journals
Published: Jan 29, 2014
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.