Access the full text.
Sign up today, get DeepDyve free for 14 days.
D. Y. Ren J. Y. Zhang (2002)
Trace element abundances in major minerals of Late Permian coals from southwestern Guizhou Province, ChinaInternational Journal of Coal Geology, 53
D. W. Hansell R. G. Rizeq (1994)
Predictions of metal emissions and partitioning in coal-fired boilersFuel Processing Technology, 73
D. Y. Ren J. Y. Zhang (2001)
Retention of selenium volatility using lime in coal combustionEnvironmental Science, 22
L. Zhang Y. Ninomiya (2004)
Influence of coal particle size on particulate matter emission and its chemical species produced during coal combustionFuel Processing Technology, 85
F. Stoeckli (1988)
Active Carbon
F. Jin H. C. Zeng (2004)
Removal of elemental mercury from coal combustion flue gas by chloride-impregnated activated carbonFuel, 83
X. Wan H. C. Zeng (2006)
Experimental research of removing mercury from flue gas by activated carbon fibersJournal of Huazhong University of Science and Technology, 34
R. Agnihotri S. Mahuli (1997)
Mechanism of arsenic sorption by hydrated limeEnviron Sci Technol, 31
K. Dam-Johansen F. Frandsen (1994)
Trace elements from combustion and gasification of coal—an equilibrium approachProg Energy Combust Sci, 20
C. W. Lee Y. H. Li (2003)
Importance of activated carbon’s oxygen surface functional groups on elemental mercury adsorptionFuel, 82
R. Juan X. Querol (1996)
Mobility of trace elements from coal and combustion wastesFuel, 75
D. W. Xu D. Y. Ren (2004)
A preliminary study on the enrichment mechanism and occurrence of hazardous trace elements in the tertiary lignite from the Shenbei coalfield, ChinaInternational Journal of Coal Geology, 57
C. G. Zheng J. Y. Zhang (2004)
Distribution of potentially hazardous trace elements in coals from Shanxi province, ChinaFuel, 83
Y. S. Zhou H. Du (2000)
The observation of secondary skin cancer of hyperkeratosis of skin caused by hyperarsenic coalChinese Journal of Endemiology, 19
D. Y. Ren J. Y. Zhang (2000)
Restraining of arsenic volatility using lime in coal combustionJournal of Fuel Chemistry and Technology, 28
Y. Ninomiya L. Zhang (2006)
Emission of suspended PM10 from laboratory-scale coal combustion and its correlation with coal mineral propertiesFuel, 85
S. F. Dai (2006)
Geochemistry of Trace Elements in Coal
B. K. Gullett S. V. Krishnan (1994)
Sorption of elemental mercury by activated carbonsEnviron Sci Technol, 28
Z. H. Ding B. S. Zheng (1999)
Issues of health and disease relating to coal use in southwestern ChinaInternational Journal of Coal Geology, 40
W. Orem R. B. Finkelman (2002)
Health impacts of coal and coal use: Possible solutionsInternational Journal of Coal Geology, 50
Zheng B S Belkin H E (1997)
Proceedings of Fourteenth Annual International Pittsburgh Coal ConferenceProceedings of Fourteenth Annual International Pittsburgh Coal Conference (CD-ROM ISBN 1-890977-14-4)
D. Y. Ren S. F. Dai (2004)
The cause of endemic fluorosis in western Guizhou Province, southwest ChinaFuel, 83
C. A. Miller W. P. Linak (2002)
On trimodal particle size distributions in fly ash from pulverized-coal combustionProc Combust Inst, 29
F. Wei (2005)
Study on sub-micron particle formation and agglomeration mechanism from coal combustion
D. X. Zhou Y. S. Zhou (1998)
Epidemiological investigation on coal-burning type of arsenic poisoning in different environment within 20 yearsChinese Journal of Endemiology, 17
D. Y. Ren S. F. Dai (2005)
Concentration and distribution of elements in Late Permian coals from western Guizhou Province, ChinaInternational Journal of Coal Geology, 61
L. Y. Yu J. D. Lu (2004)
Study of control with adsorbents on trace elements during fluidized bed combustionProceedings of the Chinese Society of Electrical Engineering, 24
C. A. Palmer R. B. Finkelman (1990)
Combustion and leaching behavior of elements in the Argonne Permian coal sampleEnergy & Fuels, 4
J. Y. Zhang (1999)
Enrichment mechanism and pollution restraining of potential hazardous trace elements in coal
F. Goodarzi (1995)
Environmental Aspects of Trace Elements in Coal
Y. Hong B. S. Zheng (1992)
The Se-rich carbonaceous siliceous rock and endemic selenosis in southwest Hubei, ChinaChin Sci Bull, 37
R. E. Jervis J. X. Sun (1986)
Distribution of trace element in coal during combustion processScience in China, Ser A, 12
D. W. Xu D. Y. Ren (1999)
Distribution of associated elements in coals from Shenbei coalfieldJournal of China University of Mining & Technology, 28
W. S. Seames (2003)
An initial study of the fine fragmentation fly ash particle mode generated during pulverized coal combustionFuel Processing Technology, 81
Abstract Hazardous trace element emissions have caused serious harm to human health in China. Several typical high-toxic trace element coals were collected from different districts and were used to investigate the emission characteristics of toxic trace elements (As, Se, Cr, Hg) and to explore preliminary control methods. Coal combustion tests were conducted in several bench-scale furnaces including drop tube furnace (DTF), circulating fluidized bed (CFB) combustion furnace, and fixed-bed combustion furnace. Calcium oxide was used to control the emission of arsenic and selenium. The granular activated carbons (AC) and activated-carbon fibers (ACF) were used to remove mercury in the flue gas from coal combustion. The chemical composition and trace element contents of ash and particulate matter (PM) were determined by X-ray fluorescence (XRF) spectrometry and inductively coupled plasma-atomic emission spectrometry (ICP-AES), respectively. The speciation and concentration of mercury were investigated using the Ontario-Hydro method. X-ray diffraction spectrometry (XRD) was used to determine the mineral composition of production during combustion experiments. With the addition of a calcium-based sorbent, arsenic concentration in PM1 sharply decreased from 0.25–0.11 mg/m3. In fixed-bed combustion of coal, the retention rates of selenium volatiles were between 11.6% and 50.7% using lime. In the circulating fluidized-bed combustion of coal, the content of selenium in ash from the chimney was reduced to one-fourth of its original value and that in leaching water from the chimney decreased by two orders of magnitude using lime. Calcium-based sorbent is an effective additive to control the emission of As and Se during coal combustion. The emission of chromium is influenced by the occurrence mode of Cr in coal. Chromium emission in PM2.5 during coal combustion is 55.5 and 34.7 μg/m3 for Shenbei coal and mixed Pingdingshan coal, respectively. The adsorptive capacity of granular activated carbon for Hg0 is significantly enhanced through ZnCl2-impregnation. The activated carbon fibers showed decent efficiency in mercury adsorption, on which surface oxygen complex showed positive effects on mercury adsorption.
"Frontiers in Energy" – Springer Journals
Published: Jul 1, 2007
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.