Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You and Your Team.

Learn More →

Optimal cutting condition determination for milling thin-walled details

Optimal cutting condition determination for milling thin-walled details This paper presents an approach for determining the optimal cutting condition for milling thin-walled elements with complex shapes. The approach is based on the interaction between the thin-walled detail and its periodic excitation by tooth passing, taking into account the high intermittency of such a process. The influence of the excitation frequency on the amplitude of the detail oscillation during milling was determined by simulation and experiments. It was found that the analytical results agreed with experimental data. The position of the detail when the tooth starts to cut was evaluated through experiments. The influence of this parameter on the processing state is presented herein. The processing stability is investigated and compared with the proposed approach. Thereafter, spectral analyses are conducted to determine the contribution of the vibrating frequencies to the detail behavior during processing. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Advances in Manufacturing Springer Journals

Optimal cutting condition determination for milling thin-walled details

Loading next page...
 
/lp/springer-journals/optimal-cutting-condition-determination-for-milling-thin-walled-5Isfctpa0J
Publisher
Springer Journals
Copyright
Copyright © 2018 by Shanghai University and Springer-Verlag GmbH Germany, part of Springer Nature
Subject
Engineering; Manufacturing, Machines, Tools; Control, Robotics, Mechatronics; Nanotechnology and Microengineering
ISSN
2095-3127
eISSN
2195-3597
DOI
10.1007/s40436-018-0224-y
Publisher site
See Article on Publisher Site

Abstract

This paper presents an approach for determining the optimal cutting condition for milling thin-walled elements with complex shapes. The approach is based on the interaction between the thin-walled detail and its periodic excitation by tooth passing, taking into account the high intermittency of such a process. The influence of the excitation frequency on the amplitude of the detail oscillation during milling was determined by simulation and experiments. It was found that the analytical results agreed with experimental data. The position of the detail when the tooth starts to cut was evaluated through experiments. The influence of this parameter on the processing state is presented herein. The processing stability is investigated and compared with the proposed approach. Thereafter, spectral analyses are conducted to determine the contribution of the vibrating frequencies to the detail behavior during processing.

Journal

Advances in ManufacturingSpringer Journals

Published: Jun 1, 2018

References