Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Fault simulation of boiler heating surface ash deposition in a power plant system

Fault simulation of boiler heating surface ash deposition in a power plant system Abstract The simulation model of a power generation system was developed based on EASY5 simulation platform. The performances of the power plant under the conditions of the furnace slagging and ash deposition of the heating surfaces in the boiler were simulated. The results show that the simulation model can reasonably reflect the characteristics of the power plant when each component is under fault conditions. Through fault simulation, the change of the performance parameters can be obtained, which can be used in fault diagnosis system as the diagnosis criterion for expert system. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png "Frontiers in Energy" Springer Journals

Fault simulation of boiler heating surface ash deposition in a power plant system

Zhang, Weiwei; Zhang, Huisheng; Su, Ming
"Frontiers in Energy" , Volume 5 (4): 9 – Dec 1, 2011
Download PDF
9 pages

Loading next page...
 
/lp/springer-journals/fault-simulation-of-boiler-heating-surface-ash-deposition-in-a-power-BEXuBG70Ms
Publisher
Springer Journals
Copyright
2011 Higher Education Press and Springer-Verlag Berlin Heidelberg
ISSN
2095-1701
eISSN
1673-7504
DOI
10.1007/s11708-011-0162-x
Publisher site
See Article on Publisher Site

Abstract

Abstract The simulation model of a power generation system was developed based on EASY5 simulation platform. The performances of the power plant under the conditions of the furnace slagging and ash deposition of the heating surfaces in the boiler were simulated. The results show that the simulation model can reasonably reflect the characteristics of the power plant when each component is under fault conditions. Through fault simulation, the change of the performance parameters can be obtained, which can be used in fault diagnosis system as the diagnosis criterion for expert system.

Journal

"Frontiers in Energy" – Springer Journals

Published: Dec 1, 2011

References

  • 188th National Meeting of the American Chemical Society
    Borio R W, Levasseur A A. Overview of coal ash deposition in boilers. In
  • Ash deposition impacts in the power industry
    N. S. Harding, D. C. O’Connor
  • Development of quantitative techniques to characterize mineral matter transformations in a pulverized coal fired boiler
    R. A. Creelman
  • Modular modeling method and its implementation on the simulation platform on EASY5
    Y. Qian, Y. W. Liu
  • A volume component model and its solution for power system simulation
    M. Su
  • Modularized simulation modeling for a large steam turbine
    M. Su, S. L. Weng
  • Foundation and simulation of general module of steam turbine system
    L. Fan
  • Thermal system simulation and modeling technique based on general purpose platform-application in gas-steam combined cycle modular simulation
    L. X. Liu
  • 3rd International Conference on Bioinformatics and Biomedical Engineering
    Liu Y Q, Wang Y X, Wang H F, Li P. Experimental investigations on combustion characteristics of the blast furnace gas. In
  • A drum boiler model for long term power system dynamic simulation
    M.E. Flynn, M.J. O’Malley
  • Ash fooling in coal-fired utility boilers. Monitoring and optimization of on-load cleaning
    A. Valero, C. Cortes