Access the full text.
Sign up today, get DeepDyve free for 14 days.
Loading next page...
/lp/springer-journals/experimental-study-of-eccentrically-loaded-single-angle-compression-kphr7jT0jH
References (24)
-
WH Mueller, H Erzurumlu (1983)
Limit State Behavior of Steel Angle Columns -
S. Adluri, M. Madugula, G. Monforton (1991)
Finite element failure analysis of schifflerized anglesComputers & Structures, 41
-
(2007)
Keelor, Toward a simplified design of singleangle beam-columns -
Eccentrically loaded single angle struts -
(1975)
Buckling tests on crossed diagonals in lattice towers -
JB Kennedy (1972)
10.1061/JSDEAG.0003378J. Struct. Div., 98
-
A. Stang, L. Strickenberg (2018)
Results of Some Compression Tests of Structural Steel Angles -
(1998)
Practical compactness and bracing provisions for the design of single angle beams -
Yi Liu, L. Hui (2008)
Experimental study of beam–column behaviour of steel single anglesJournal of Constructional Steel Research, 64
-
J. Kennedy, M. Murty (1972)
Buckling of Steel Angle and Tee StrutsJournal of the Structural Division, 98
-
Y Liu, L Hui (2010)
Finite element study of single angle beam-columnsJ. Eng. Struct., 32
-
S. Kitipornchai, H. Lee (1986)
Inelastic buckling of single-angle, tee and double-angle strutsJournal of Constructional Steel Research, 6
-
S. Alsayed, R. Bjorhovde (1989)
Experimental study of single angle columnsJournal of Constructional Steel Research, 12
-
10.6028/nbst.6395
-
CJ Earls, DC Keelor (2007)
Toward a simplified design of single-angle beam-columnsEng. J. AISC, 44
-
WH Mueller, AL Wagner (1983)
Plastic Behavior Of Steel Angle Columns -
S. Kitipornchai, Ho Lee (1986)
Inelastic experiments on angle and tee strutsJournal of Constructional Steel Research, 6
-
S. Adluri, M. Madugula (1996)
Flexural Buckling of Steel Angles: Experimental InvestigationJournal of Structural Engineering-asce, 122
-
M. Wakabayashi, T. Nonaka (1965)
On the Buckling Strength of Angles in Transmission TowersBulletin of the Disaster Prevention Research Institute, 15
-
M. Temple, S. Sakla (1998)
Single-angle compression members welded by one leg to a gusset plate. II. A parametric study and design equationCanadian Journal of Civil Engineering, 25
-
(1983)
Limit State Behavior of Steel Angle Columns (Civil-Structural Engineering -
Y Liu (2010)
10.1016/j.engstruct.2010.03.009J. Eng. Struct., 32
-
Yi Liu, L. Hui (2010)
Behaviour of steel single angles subjected to eccentric axial loadsCanadian Journal of Civil Engineering, 37
-
(2003)
Behaviour and Design of Angle Compression Members
- Publisher
- Springer Journals
- Copyright
- Copyright © 2018 by The Institution of Engineers (India)
- Subject
- Engineering; Civil Engineering
- ISSN
- 2250-2149
- eISSN
- 2250-2157
- DOI
- 10.1007/s40030-018-0263-1
- Publisher site
- See Article on Publisher Site
Abstract
An experimental investigation of the buckling response of single angle compression member is presented here. Equal angle was used with a range of maximum principal slenderness ratios to determine elastic and inelastic failure characteristics, including flexural torsional effects. A nonlinear finite element model applicable to steel single angle compression members eccentrically loaded through one leg has been developed using an existing finite element package. A finite element study was conducted to investigate the strength and behavior of angle compression member. The finite element analysis was performed for angle as per experimental investigation. The results obtained by this study, emphasize the importance of the flexural–torsional buckling mode, especially in the inelastic range of behavior for angle.
Journal
Journal of The Institution of Engineers (India): Series A – Springer Journals
Published: Feb 9, 2018