Access the full text.
Sign up today, get DeepDyve free for 14 days.
Loading next page...
/lp/springer-journals/experimental-investigations-of-carbon-nanotubes-reinforcement-on-BnMYWk3tT1
References (34)
-
G. Bolelli, V. Cannillo, L. Lusvarghi, M. Montorsi, F. Mantini, M. Barletta (2007)
Microstructural and tribological comparison of HVOF-sprayed and post-treated M–Mo–Cr–Si (M = Co, Ni) alloy coatingsWear, 263
-
K. Jasim (2013)
Laser sealing of zirconia–yttria–alumina plasma sprayed coatingJournal of King Saud University: Engineering Sciences, 25
-
S. Kanagaraj, F. Varanda, Tatiana Zhil’tsova, Mónica Oliveira, José Simões (2007)
Mechanical properties of high density polyethylene/carbon nanotube compositesComposites Science and Technology, 67
-
Uţu Dragoş, Marginean Gabriela, Brandl Waltraut, Cartis Ioan (2005)
Improvement of the oxidation behaviour of electron beam remelted MCrAlY coatingsSolid State Sciences, 7
-
Yi Feng, Hailong Yuan, Min Zhang (2005)
Fabrication and properties of silver-matrix composites reinforced by carbon nanotubesMaterials Characterization, 55
-
D. Lim, D. You, H.-J. Choi, S. Lim, H. Jang (2005)
Effect of CNT distribution on tribological behavior of alumina–CNT compositesWear, 259
-
P. Silva, V. Almeida, G. Machado, E. Benvenutti, T. Costa, M. Gallas (2012)
Surfactant-based dispersant for multiwall carbon nanotubes to prepare ceramic composites by a sol-gel method.Langmuir : the ACS journal of surfaces and colloids, 28 2
-
S. Bhaskar, T. Rajmohan, K. Palanikumar, B. Kumar (2015)
Synthesis and Characterization of Multi Wall Carbon Nanotubes (MWCNT) Reinforced Sintered Magnesium Matrix CompositesJournal of The Institution of Engineers (India): Series D, 97
-
A. Esawi, K. Morsi, A. Sayed, M. Taher, S. Lanka (2010)
Effect of carbon nanotube (CNT) content on the mechanical properties of CNT-reinforced aluminium compositesComposites Science and Technology, 70
-
K. Balani, A. Agarwal (2008)
Process Map for Plasma Sprayed Aluminum Oxide-Carbon Nanotube Nanocomposite CoatingsMetal Finishing, 106
-
X. Qi, N. Eigen, E. Aust, F. Gärtner, T. Klassen, R. Bormann (2006)
Two-body abrasive wear of nano- and microcrystalline TiC–Ni-based thermal spray coatingsSurface & Coatings Technology, 200
-
G. Overney, W. Zhong, D. Tománek (1993)
Structural rigidity and low frequency vibrational modes of long carbon tubulesZeitschrift für Physik D Atoms, Molecules and Clusters, 27
-
P. Ajayan, L. Schadler, Cindy Giannaris, Á. Rubio (2000)
Single‐Walled Carbon Nanotube–Polymer Composites: Strength and WeaknessAdvanced Materials, 12
-
V. Sidhu, K. Goyal, R. Goyal (2017)
Comparative study of corrosion behaviour of HVOF-coated boiler steel in actual boiler environment of a thermal power plantJournal of the Australian Ceramic Society, 53
-
R. Goyal, B. Sidhu, V. Chawla (2017)
Characterization of plasma-sprayed carbon nanotube (CNT)-reinforced alumina coatings on ASME-SA213-T11 boiler tube steelThe International Journal of Advanced Manufacturing Technology, 92
-
E. Wong, P. Sheehan, Charles Lieber (1997)
Nanobeam Mechanics: Elasticity, Strength, and Toughness of Nanorods and NanotubesScience, 277
-
B. Marple, C. Moreau (2003)
Thermal Spray 2003: Advancing the Science And Applying the Technology -
E. Anand, S. Natarajan (2014)
Effect of Carbon Nanotubes on Corrosion and Tribological Properties of Pulse-Electrodeposited Co-W Composite CoatingsJournal of Materials Engineering and Performance, 24
-
A. Keshri, A. Agarwal (2011)
Splat morphology of plasma sprayed aluminum oxide reinforced with carbon nanotubes: A comparison between experiments and simulationSurface & Coatings Technology, 206
-
E. Turunen, T. Varis, T. Gustafsson, J. Keskinen, Teppo Fält, S. Hannula (2006)
Parameter optimization of HVOF sprayed nanostructured alumina and alumina-nickel composite coatingsSurface & Coatings Technology, 200
-
S. Chatha, H. Sidhu, B. Sidhu (2013)
High-Temperature Behavior of a NiCr-Coated T91 Boiler Steel in the Platen Superheater of Coal-Fired BoilerJournal of Thermal Spray Technology, 22
-
(2016)
Current status of thermal spray coatings for high temperature corrosion resistance of boiler steel -
M. Roy, A. Pauschitz, R. Polak, F. Franek (2006)
Comparative evaluation of ambient temperature friction behaviour of thermal sprayed Cr3C2–25(Ni20Cr) coatings with conventional and nano-crystalline grainsTribology International, 39
-
S. Rawal (2001)
Metal-matrix composites for space applicationsJOM, 53
-
A. Portinha, V. Teixeira, J. Carneiro, J. Martins, Manuel Costa, R. Vaßen, D. Stoever (2005)
Characterization of thermal barrier coatings with a gradient in porositySurface & Coatings Technology, 195
-
M. Uusitalo, P.M.J Vuoristo, T.A Mäntylä (2004)
High temperature corrosion of coatings and boiler steels below chlorine-containing salt depositsCorrosion Science, 46
-
H. Herman, S. Sampath, R. Mccune (2000)
Thermal Spray: Current Status and Future TrendsMRS Bulletin, 25
-
T. Laha, A. Agarwal (2008)
Effect of sintering on thermally sprayed carbon nanotube reinforced aluminum nanocompositeMaterials Science and Engineering A-structural Materials Properties Microstructure and Processing, 480
-
W. Tillmann, E. Vogli, I. Baumann, G. Kopp, C. Weihs (2010)
Desirability-Based Multi-Criteria Optimization of HVOF Spray Experiments to Manufacture Fine Structured Wear-Resistant 75Cr3C2-25(NiCr20) CoatingsJournal of Thermal Spray Technology, 19
-
K. Jasim (2013)
Corrigendum to “Laser sealing of zirconia–yttria–alumina plasma sprayed coating” [J. Kind Saud Univ. Eng. Sci. 25 (1) 2013 11–20]Journal of King Saud University: Engineering Sciences, 28
-
SV Bhaskar, T Rajmohan, K Palanikumar, BBG Kumar (2016)
Synthesis and characterization of multi wall carbon nanotubes (MWCNT) reinforced sintered magnesium matrix compositesJ Inst Eng (India): Ser D, 97
-
S. Chatha, H. Sidhu, B. Sidhu (2012)
Characterisation and Corrosion-Erosion Behaviour of Carbide based Thermal Spray CoatingsJournal of Minerals and Materials Characterization and Engineering, 11
-
K. Balani, T. Zhang, A. Karakoti, Wenzhi Li, S. Seal, A. Agarwal (2008)
In situ carbon nanotube reinforcements in a plasma-sprayed aluminum oxide nanocomposite coatingActa Materialia, 56
-
P. Hvizdoš, V. Puchý, A. Duszová, J. Dusza (2011)
Carbon Nanofibers Reinforced Ceramic Matrix Composites
- Publisher
- Springer Journals
- Copyright
- Copyright © 2018 by Australian Ceramic Society
- Subject
- Materials Science; Ceramics, Glass, Composites, Natural Materials; Materials Engineering; Inorganic Chemistry
- ISSN
- 2510-1560
- eISSN
- 2510-1579
- DOI
- 10.1007/s41779-018-0237-9
- Publisher site
- See Article on Publisher Site
Abstract
This paper deals with the preparation and development of carbon nanotubes (CNT)-reinforced chromium oxide coatings. The 8% by weight CNT was reinforced with 92% by weight chromium oxide. The composite powder was blended in a ball mill and deposited successfully with high velocity oxy-fuel spraying technique. The microhardness of CNT-reinforced coating was found to be 30% higher than conventional coatings. The CNT reinforcement was able to decrease porosity of composite by 20%. The XRD spectrum indicated that CNT were present in pure graphite form and were found to be chemically inert during the spraying process. CNT did not react with chromium oxide to form carbides. The metallurgical analysis of surface and cross-section of composite coating revealed that CNT were uniformly distributed throughout the composite matrix, and formed a bridge-like structure between the splats of chromium oxide, which improved the properties of composite coating.
Journal
Journal of the Australian Ceramic Society – Springer Journals
Published: Jul 16, 2018