Access the full text.
Sign up today, get DeepDyve free for 14 days.
G. Crammond, S. Boyd, J. Dulieu‐Barton (2014)
Evaluating the localised through-thickness load transfer and damage initiation in a composite joint using digital image correlationComposites Part A-applied Science and Manufacturing, 61
T. Kwak, Y. Kim, W. Bae (2002)
Finite element analysis on the effect of die clearance on shear planes in fine blankingJournal of Materials Processing Technology, 130
Anthony Sexton, W. Cantwell, S. Kalyanasundaram (2012)
Stretch forming studies on a fibre metal laminate based on a self-reinforcing polypropylene compositeComposite Structures, 94
H Yokoi, T Nakagawa, H Kudo (1983)
Precision piercing and blanking of fiber reinforced plastics by vibro-punchingAnn CIRP, 32
Kazutake Komori (2013)
Simulation of crack arrest in blanking using the node separation methodInternational Journal of Mechanical Sciences, 68
L. Kroll, S. Mueller, R. Mauermann, R. Gruetzner (2011)
STRENGTH OF SELF-PIERCING RIVETED JOINTS FOR CFRP / ALUMINIUM SHEETS
S. Davey, R. Das, W. Cantwell, S. Kalyanasundaram (2013)
Forming studies of carbon fibre composite sheets in dome forming processesComposite Structures, 97
M. Sadighi, E. Rabizadeh, F. Kermansaravi (2008)
Effects of laminate sequencing on thermoforming of thermoplastic matrix compositesJournal of Materials Processing Technology, 201
G. Fang, P. Zeng, L. Lou (2002)
Finite element simulation of the effect of clearance on the forming quality in the blanking processJournal of Materials Processing Technology, 122
T. Sınmazçelik, E. Avcu, M. Bora, Onur Çoban (2011)
A review: Fibre metal laminates, background, bonding types and applied test methodsMaterials & Design, 32
L. Fratini, V. Ruisi (2009)
Self-piercing riveting for aluminium alloys-composites hybrid jointsThe International Journal of Advanced Manufacturing Technology, 43
Hyunwoo So, D. Faßmann, H. Hoffmann, R. Golle, M. Schaper (2012)
An investigation of the blanking process of the quenchable boron alloyed steel 22MnB5 before and after hot stamping processJournal of Materials Processing Technology, 212
M. Pawlikowski (2014)
Non-linear approach in visco-hyperelastic constitutive modelling of polyurethane nanocompositeMechanics of Time-Dependent Materials, 18
W. Wu, D. Abliz, Bingyan Jiang, G. Ziegmann, D. Meiners (2014)
A novel process for cost effective manufacturing of fiber metal laminate with textile reinforced pCBT composites and aluminum alloyComposite Structures, 108
J. Slavič, Š. Bolka, V. Bratuš, M. Boltežar (2014)
A novel laboratory blanking apparatus for the experimental identification of blanking parametersJournal of Materials Processing Technology, 214
H. Yokoi, T. Nakagawa, H. Kudo (1983)
Precision Piercing and Blanking of Fiber Reinforced Plastics by Vibro-PunchingCIRP Annals, 32
Honglin Luo, Guang-yao Xiong, Zhiwei Yang, Sudha Raman, Qiuping Li, Chunying Ma, Deying Li, Zheren Wang, Y. Wan (2014)
Preparation of three-dimensional braided carbon fiber-reinforced PEEK composites for potential load-bearing bone fixations. Part I. Mechanical properties and cytocompatibility.Journal of the mechanical behavior of biomedical materials, 29
V. Zal, H. Naeini, A. Bahramian, B. Abbaszadeh (2016)
Experimental evaluation of blanking and piercing of PVC based composite and hybrid laminatesAdvances in Manufacturing, 4
E. Falconnet, H. Makich, J. Chambert, G. Monteil, P. Picart (2012)
Numerical and experimental analyses of punch wear in the blanking of copper alloy thin sheetWear, 296
P. Chang, P. Yeh, Jenn‐Ming Yang (2008)
Fatigue crack initiation in hybrid boron/glass/aluminum fiber metal laminatesMaterials Science and Engineering A-structural Materials Properties Microstructure and Processing, 496
Masahito Ueda, S. Miyake, H. Hasegawa, Y. Hirano (2012)
Instantaneous mechanical fastening of quasi-isotropic CFRP laminates by a self-piercing rivetComposite Structures, 94
Jie Xu, B. Guo, Chunju Wang, D. Shan (2012)
Blanking clearance and grain size effects on micro deformation behavior and fracture in micro-blanking of brass foilInternational Journal of Machine Tools & Manufacture, 60
Blanking is one of the high speed processes to produce flat products from sheets economically. In order to expand this process to new materials, the blanking of polyvinyl chloride (PVC)/fiberglass thermoplastic composite laminates and composite/aluminum hybrid laminates was investigated. The laminates were produced by the film stacking procedure and then blanked by circular die and punches. The blanking process was done in two levels of clearance including 4% and 8% of the laminates thickness, two levels of punch speed including 40 mm/min and 200 mm/min and at two levels of temperature (room temperature and 80 °C) for both composite and hybrid laminates. The effects of the parameters on the maximum blanking force, cutting energy, and quality and precision of sheared edges were studied. Cutting mechanism for blanking in different conditions was explained. It was concluded that at room temperature, blanked composite and hybrid laminates had a high quality of sheared edges but at elevated temperature, although the maximum blanking force was reduced, the quality of sheared edge was reduced significantly.
Advances in Manufacturing – Springer Journals
Published: Aug 4, 2016
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.