Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Experimental analysis of properties of materials for rapid prototyping

Experimental analysis of properties of materials for rapid prototyping Rapid prototyping (RP) can substantially shorten the time and reduce the cost of developing a new product from the initial idea to production. Rapid prototyping can help in recognizing the basic defects whose subsequent correction may prove very expensive, especially if they have already been made when the product is ready for production. There are also many restrictions of RP procedures, primarily in the number of available materials and their properties, which may differ significantly from the properties of end product materials. In this work, based on the stipulated standards of the 3D printing machines (ZPrinter 310 Plus) and the hybrid Polyjet technique (Objet Eden 330), adequate test specimens were made. Furthermore, with adequate equipment, we carried out the analysis of the dimensions, roughness of surfaces, and mechanical properties of prototype test specimens. Then, based on the data obtained by testing of properties, we provided a critical commentary regarding the data stipulated by their producers. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png The International Journal of Advanced Manufacturing Technology Springer Journals

Experimental analysis of properties of materials for rapid prototyping

Download PDF
11 pages

Loading next page...
 
/lp/springer-journals/experimental-analysis-of-properties-of-materials-for-rapid-prototyping-kAnAXxrKcP

References (0)

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

Publisher
Springer Journals
Copyright
Copyright © 2007 by Springer-Verlag London Limited
Subject
Engineering; Industrial and Production Engineering; Media Management; Mechanical Engineering; Computer-Aided Engineering (CAD, CAE) and Design
ISSN
0268-3768
eISSN
1433-3015
DOI
10.1007/s00170-007-1310-7
Publisher site
See Article on Publisher Site

Abstract

Rapid prototyping (RP) can substantially shorten the time and reduce the cost of developing a new product from the initial idea to production. Rapid prototyping can help in recognizing the basic defects whose subsequent correction may prove very expensive, especially if they have already been made when the product is ready for production. There are also many restrictions of RP procedures, primarily in the number of available materials and their properties, which may differ significantly from the properties of end product materials. In this work, based on the stipulated standards of the 3D printing machines (ZPrinter 310 Plus) and the hybrid Polyjet technique (Objet Eden 330), adequate test specimens were made. Furthermore, with adequate equipment, we carried out the analysis of the dimensions, roughness of surfaces, and mechanical properties of prototype test specimens. Then, based on the data obtained by testing of properties, we provided a critical commentary regarding the data stipulated by their producers.

Journal

The International Journal of Advanced Manufacturing Technology – Springer Journals

Published: Dec 19, 2007

There are no references for this article.