Access the full text.
Sign up today, get DeepDyve free for 14 days.
Liang Wang, S. Felicelli, J. Craig (2007)
Thermal Modeling and Experimental Validation in the LENS™ Process
A. Matsunawa, Jong-Do Kim, N. Seto, M. Mizutani, S. Katayama (1998)
Dynamics of keyhole and molten pool in laser weldingJournal of Laser Applications, 10
H. Wei, J. Elmer, T. DebRoy (2016)
Origin of grain orientation during solidification of an aluminum alloyActa Materialia, 115
T. Craeghs, S. Clijsters, E. Yasa, J. Kruth (2011)
Online Quality Control of Selective Laser Melting
(2015)
Powder Metallurgy Processing by Hot Isostatic Pressing
O. Lobkis, S. Rokhlin (2010)
Characterization of polycrystals with elongated duplex microstructure by inversion of ultrasonic backscattering dataApplied Physics Letters, 96
Y. Kawahito, M. Mizutani, S. Katayama (2007)
Elucidation of high-power fibre laser welding phenomena of stainless steel and effect of factors on weld geometryJournal of Physics D: Applied Physics, 40
L. Chehami, E. Moulin, J. Rosny, C. Prada, E. Châtelet, G. Lacerra, K. Gryllias, F. Massi (2017)
Nonlinear secondary noise sources for passive defect detection using ultrasound sensorsJournal of Sound and Vibration, 386
E. Reutzel, A. Nassar (2015)
A survey of sensing and control systems for machine and process monitoring of directed-energy, metal-based additive manufacturingRapid Prototyping Journal, 21
하시구치돈에이치 (2002)
Hot isostatic pressing of castings
R. Dewhurst, D. Hutchins, S. Palmer, C. Scruby (1982)
Quantitative measurements of laser‐generated acoustic waveformsJournal of Applied Physics, 53
(2016)
Online Monitoring of Additive Manufacturing Processes Using Ultrasound
M. Islam, Tuomas Purtonen, H. Piili, A. Salminen, O. Nyrhilae (2013)
Temperature profile and imaging analysis of laser additive manufacturing of stainless steelPhysics Procedia, 41
D. Pandey, S. Pandey (2010)
Ultrasonics: A Technique of Material Characterization
N. Kumbhar, A. Mulay (2016)
Post Processing Methods used to Improve Surface Finish of Products which are Manufactured by Additive Manufacturing Technologies: A ReviewJournal of The Institution of Engineers (India): Series C, 99
S. Kleszczynski, J. Jacobsmühlen, J. Sehrt, G. Witt (2012)
ERROR DETECTION IN LASER BEAM MELTING SYSTEMS BY HIGH RESOLUTION IMAGING
J. Blecher, T. Palmer, T. DebRoy (2016)
Porosity in thick section alloy 690 welds - Experiments, modeling, mechanism, and remedyWelding Journal, 95
S. Berumen, F. Bechmann, S. Lindner, J. Kruth, T. Craeghs (2010)
Quality control of laser- and powder bed-based Additive Manufacturing (AM) technologiesPhysics Procedia, 5
(1998)
Solidification Crack Susceptibility for Weld Metals with the Trans - Varestraint Test , Part 2 : commercially used Aluminum and Aluminum Alloys
T. DebRoy, H. Wei, J. Zuback, T. Mukherjee, J. Elmer, J. Milewski, A. Beese, A. Wilson-Heid, A. De, Wei Zhang (2018)
Additive manufacturing of metallic components – Process, structure and propertiesProgress in Materials Science, 92
S. Katayama, Yoshihiro Kobayashi, M. Mizutani, A. Matsunawa (2001)
Effect of vacuum on penetration and defects in laser weldingJournal of Laser Applications, 13
W. Marsden (2012)
I and J
Aaas News, E. Lu, Min-Min Zhou, Rong Mocsai, A. Myers, E. Huang, B. Jackson, Davide Ferrari, V. Tybulewicz, V. Lowell, Clifford Lepore, J. Koretzky, Gary Kahn, M. L., F. Achard, H. Eva, Ernst-Detlef Schulze, J. Acharya, U. Acharya, U. Acharya, Shetal Patel, E. Koundakjian, K. Nagashima, Xianlin Han, J. Acharya, D. Adams, Jonathan Horton, Blood, M. Adams, M. McVey, J. Sekelsky, J. Adamson, G. Kochendoerfer, A. Adeleke, A. Kamdem-Toham, Alan Aderem, C. Picard, Aeschlimann, G. Haug, G. Agarwal, M. Scully, H. Aguilaniu, L. Gustafsson, M. Rigoulet, T. Nyström, Asymmetric Inheri, Ferhaan Ahmad, J. Schmitt, M. Aida, S. Ammal, J. Aizenberg, D. Muller, J. Grazul, D. Hamann, J. Ajioka, C. Su, A. Akella, M. Alam, F. Gao, A. Alatas, H. Sinn, Titus Albu, P. Zuev, M. Al-Dayeh, J. Dwyer, A. Al-ghonaium, Sami Al-Hajjar, S. Al-Jumaah, A. Allakhverdov, V. Pokrovsky, Allen, A. Brown, James Allen, A. Brown, James Gillooly, James (1893)
Book ReviewsBuffalo Medical and Surgical Journal, 33
S. Everton, P. Dickens, C. Tuck, B. Dutton (2017)
Using Laser Ultrasound to Detect Subsurface Defects in Metal Laser Powder Bed Fusion ComponentsJom (Warrendale, Pa. : 1989), 70
S. Shiva, I. Palani, S. Mishra, C. Paul, L. Kukreja (2015)
Investigations on the influence of composition in the development of Ni-Ti shape memory alloy using laser based additive manufacturingOptics and Laser Technology, 69
M. Blodgett, D. Eylon (2001)
The Influence of Texture and Phase Distortion on Ultrasonic Attenuation in Ti-6Al-4VJournal of Nondestructive Evaluation, 20
H. Angermann, O. Biest (1995)
Scientific and Technological Progress in Binder Burnout from Metal Injection Molded CompactsMaterials and Manufacturing Processes, 10
Cang Zhao, K. Fezzaa, Ross Cunningham, H. Wen, F. Carlo, Lianyi Chen, A. Rollett, T. Sun (2017)
Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffractionScientific Reports, 7
Shyam Barua, F. Liou, J. Newkirk, T. Sparks (2014)
Vision-based defect detection in laser metal deposition processRapid Prototyping Journal, 20
K. Barraclough (2001)
I and iBMJ : British Medical Journal, 323
A. Nassar, T. Spurgeon, E. Reutzel (2015)
Sensing defects during directed-energy additive manufacturing of metal parts using optical emissions spectroscopy
MD KINAMI, I. Miyazaki, Mdi
AND T
W. Sames, F. List, S. Pannala, R. Dehoff, S. Babu (2016)
The metallurgy and processing science of metal additive manufacturingInternational Materials Reviews, 61
D. Cerniglia, M. Scafidi, Antonio Pantano, John Rudlin (2015)
Inspection of additive-manufactured layered components.Ultrasonics, 62
富男 仙田, 福久 松田, 元太 高野 (1973)
Trans-Varestraint試験法による溶接金属の凝固割れ感受性の研究(2)Quarterly Journal of The Japan Welding Society, 42
H. Krauss, C. Eschey, M. Zaeh (2012)
Thermography for Monitoring the Selective Laser Melting Process
H. Rieder, Alexander Dillhöfer, M. Spies, J. Bamberg, Thomas Hess (2015)
Ultrasonic online monitoring of additive manufacturing processes based on selective laser melting, 1650
M. Pavlov, M. Doubenskaia, I. Smurov (2010)
Pyrometric analysis of thermal processes in SLM technologyPhysics Procedia, 5
M. Klein, J. Sears (2004)
Laser ultrasonic inspection of laser cladded 316LSS and TI-6-4, 2004
A. Ancona, V. Spagnolo, P. Lugarà, M. Ferrara (2001)
Optical Sensor for real-time Monitoring of CO(2) Laser Welding Process.Applied optics, 40 33
A. Gusarov, M. Pavlov, I. Smurov (2011)
Residual Stresses at Laser Surface Remelting and Additive ManufacturingPhysics Procedia, 12
Alexander Rovira, Nicolas Müller, Weiwen Deng, Chudi Ndubaku, Richmond Sarpong (2019)
Bio-inspired synthesis of xishacorenes A, B, and C, and a new congener from fuscol† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c9sc02572cChemical Science, 10
(2014)
Porosity Measurements and Analysis for Metal Additive Manufacturing Process Control, J
Takao Tanaka, Y. Izawa (2001)
Nondestructive Detection of Small Internal Defects in Carbon Steel by Laser UltrasonicsJapanese Journal of Applied Physics, 40
(1990)
Scruby, Laser Ultrasonics Techniques and Applications, 1st ed
C. Cross (2005)
On the Origin of Weld Solidification Cracking
R. Coble (1961)
Sintering Crystalline Solids. I. Intermediate and Final State Diffusion ModelsJournal of Applied Physics, 32
Andrea Arguelles, J. Turner (2017)
Ultrasonic attenuation of polycrystalline materials with a distribution of grain sizes.The Journal of the Acoustical Society of America, 141 6
A. Nassar, J. Keist, E. Reutzel, T. Spurgeon (2015)
Intra-layer closed-loop control of build plan during directed energy additive manufacturing of Ti–6Al–4VAdditive manufacturing, 6
RL Coble, JE Burke, JE Burke (1963)
Sintering in CeramicsProgress in Ceramic Science
M. Gorelik (2017)
Additive manufacturing in the context of structural integrityInternational Journal of Fatigue, 94
V. Manvatkar, A. De, T. DebRoy (2014)
Heat transfer and material flow during laser assisted multi-layer additive manufacturingJournal of Applied Physics, 116
T. Garcin, J. Schmitt, M. Militzer (2014)
Application of laser ultrasonics to monitor microstructure evolution in Inconel 718 superalloy, 14
Xiongbing Li, Xiaoqin Han, Andrea Arguelles, Yongfeng Song, Hong-wei Hu (2017)
Evaluating grain size in polycrystals with rough surfaces by corrected ultrasonic attenuationUltrasonics, 78
G. Dinda, Lijun Song, Jyoti Mazumder (2008)
Fabrication of Ti-6Al-4V Scaffolds by Direct Metal DepositionMetallurgical and Materials Transactions A, 39
H. Atkinson, S. Davies (2000)
Fundamental aspects of hot isostatic pressing: An overviewMetallurgical and Materials Transactions A, 31
T. Vilaro, C. Colin, J. Bartout (2011)
As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser MeltingMetallurgical and Materials Transactions A, 42
S. Karnati, Niroop Matta, T. Sparks, F. Liou (2013)
Vision-based Process Monitoring for Laser Metal Deposition Processes
A. Shinbine, T. Garcin, C. Sinclair (2016)
In-situ laser ultrasonic measurement of the hcp to bcc transformation in commercially pure titaniumMaterials Characterization, 117
S. Tammas-Williams, P. Withers, I. Todd, P. Prangnell (2016)
Porosity Regrowth During Heat Treatment of Hot Isostatically Pressed Additively Manufactured Titanium ComponentsScripta Materialia, 122
Peizhen Lu, J. Lannutti (2004)
Effect of Density Gradients on Dimensional Tolerance During Binder RemovalJournal of the American Ceramic Society, 83
H. Fredriksson, I. Svensson (1976)
On the mechanism of pore formation in metalsMetallurgical Transactions B, 7
Hailiang Zhao, T. DebRoy (2003)
Macroporosity free aluminum alloy weldments through numerical simulation of keyhole mode laser weldingJournal of Applied Physics, 93
Hideo Cho, Shingo Ogawa, M. Takemoto (1996)
Non-contact laser ultrasonics for detecting subsurface lateral defectsNdt & E International, 29
Hai-jun Gong, K. Rafi, H. Gu, T. Starr, B. Stucker (2014)
Analysis of defect generation in Ti–6Al–4V parts made using powder bed fusion additive manufacturing processesAdditive manufacturing, 1
S. Clijsters, T. Craeghs, S. Buls, K. Kempen, J. Kruth (2014)
In situ quality control of the selective laser melting process using a high-speed, real-time melt pool monitoring systemThe International Journal of Advanced Manufacturing Technology, 75
Tan Hua, Chen Jing, Lin Xin, Fengying Zhang, Weidong Huang (2008)
Research on molten pool temperature in the process of laser rapid formingJournal of Materials Processing Technology, 198
J. Dupont, A. Marder, C. Robino (1998)
Solidification and weldability of Nb-bearing superalloysWelding Journal, 77
S. Moylan, E. Whitenton, B. Lane, J. Slotwinski (2014)
Infrared thermography for laser-based powder bed fusion additive manufacturing processes, 1581
E. Whitenton (2012)
An introduction for machining researchers to measurement uncertainty sources in thermal images of metal cuttingInternational Journal of Machining and Machinability of Materials, 12
S. Everton, M. Hirsch, Petros Stravroulakis, R. Leach, A. Clare (2016)
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturingMaterials & Design, 95
D. Hu, R. Kovacevic (2003)
Sensing, modeling and control for laser-based additive manufacturingInternational Journal of Machine Tools & Manufacture, 43
R. Stephenson (1962)
A and VBritish Journal of Ophthalmology, 46
J. Dupont, A. Marder, C. Robino (1997)
Solidification modeling of Nb bearing superalloysSuperalloys
M. Khanzadeh, Sudipta Chowdhury, M. Tschopp, H. Doude, M. Marufuzzaman, L. Bian (2019)
In-situ monitoring of melt pool images for porosity prediction in directed energy deposition processesIISE Transactions, 51
Lijun Song, J. Mazumder (2012)
Real Time Cr Measurement Using Optical Emission Spectroscopy During Direct Metal Deposition ProcessIEEE Sensors Journal, 12
R. Trevisan, D. Schwemmer, D. Olson (1990)
CHAPTER 3 - The Fundamentals of Weld Metal Pore Formation, 8
H Taheri, MM Shoaib, LW Koester, TA Bigelow, PC Collins, LJ Bond (2017)
Powder Based Additive Manufacturing—a Review of Types of Defects, Generation Mechanisms, Detection, Property Evaluation and MetrologyInt. J. Addit. Subtrac. Mater. Manuf., 1
K. Bartkowiak (2010)
Direct laser deposition process within spectrographic analysis in situPhysics Procedia, 5
S. Khairallah, A. Anderson, A. Rubenchik, W. King (2015)
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zonesActa Materialia, 108
(1952)
Strain Theory of Hot Tearing
H. Taheri, Mohammad Shoaib, L. Koester, T. Bigelow, P. Collins, L. Bond (2017)
Powder-based additive manufacturing – a review of types of defects, generation mechanisms, detection, property evaluation and metrology, 1
(1997)
Effects of Surface Treatments on Materials Performance
Richard Smith, M. Hirsch, Rikesh Patel, Wenqi Li, A. Clare, S. Sharples (2016)
Spatially resolved acoustic spectroscopy for selective laser meltingJournal of Materials Processing Technology, 236
Fujun Wang, H. Mao, Dawei Zhang, Xingyu Zhao, Yu Shen (2008)
Online study of cracks during laser cladding process based on acoustic emission technique and finite element analysisApplied Surface Science, 255
T. Garcin, J. Schmitt, M. Militzer (2016)
In-situ laser ultrasonic grain size measurement in superalloy INCONEL 718Journal of Alloys and Compounds, 670
(1963)
Sintering in Ceramics, Progress in Ceramic Science
Suk-joong Kang (2005)
Sintering: Densification, Grain Growth and Microstructure
I. Robertson, G. Schaffer (2010)
Review of densification of titanium based powder systems in press and sinter processingPowder Metallurgy, 53
B. Lane, E. Whitenton, V. Madhavan, V. Madhavan, A. Donmez (2013)
Uncertainty of temperature measurements by infrared thermography for metal cutting applicationsMetrologia, 50
S. Matar, M. Edirisinghe, John Evans, E. Twizell (2005)
Diffusion of Degradation Products in Ceramic Moldings during Pyrolysis: Effect of GeometryJournal of the American Ceramic Society, 79
Publisher's Note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations
J. Lippold (2015)
Welding Metallurgy and Weldability: Lippold/Welding Metallurgy and Weldability
The formation of defects within additive-manufactured (AM) components is a major concern for critical structural and cyclic load applications. Thus, understanding the mechanisms of defect formation in fusion-based processes is important for prescribing the appropriate process parameters specific to the alloy system and selected processing technique. This article discusses the formation of defects within metal additive manufacturing, namely fusion-based processes and solid-state/sintering processes. Defects observed in fusion-based processes include lack of fusion, keyhole collapse, gas porosity, solidification cracking, solid-state cracking, and surface-connected porosity. The types of defects in solid-state/sintering processes are sintering porosity and improper binder burnout. The article also discusses defect-mitigation strategies, such as postprocess machining, surface treatment, and postprocessing HIP, to eliminate defects detrimental to properties from the as-built condition. The use of noncontact thermal, optical, and ultrasound techniques for inspecting AM components are also considered. The final section summarizes the knowledge gap in our understanding of the defects observed within AM components.
Journal of Materials Engineering and Performance – Springer Journals
Published: Jul 1, 2021
Keywords: additive manufacturing; hot isostatic pressing; machining; manufacturing defects; surface treatment
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.