Access the full text.
Sign up today, get DeepDyve free for 14 days.
Loading next page...
/lp/springer-journals/correlation-for-estimating-the-effects-of-temperature-on-the-viscosity-QCaRL6PSnG
References (18)
-
M.J. Assael, N.K. Dalaouti, J.H. Dymond (2000)
The Viscosity of Toluene in the Temperature Range 210 to 370 KInt. J. Thermophys., 21
-
M.J.P. Comuñas, A. Baylaucq, C. Boned, J. Fernández (2001)
High-Pressure Measurements of the Viscosity and Density of Two Polyethers and Two Dialkyl CarbonatesInt. J. Thermophys., 22
-
C.K. Zéberg-Mikkelsen, M. Barrouhou, A. Baylaucq, C. Boned (2003)
Viscosity and Density of Binary Mixtures Composed of Methylcyclohexane + cis-Decalin Versus Temperature and PressureInt. J. Thermophys., 24
-
Z. Suoqi (1997)
Predicting Fluid Viscosity by Enthropy ProductionFluid Phase Equilib., 136
-
M.J. Assael, N.K. Dalaouti, S. Polimatidou (1999)
The Viscosity of Toluene in the Temperature Range from 210 to 370 K at Pressures up to 30 MPaInt. J. Thermophys., 20
-
C.K. Zéberg-Mikkelsen, M. Barrouhou, A. Baylaucq, C. Boned (2002)
Measurements of the Viscosity and Density Versus Temperature for the Binary System Methylcyclohexane + 2,2,4,4,6,8,8-HeptamethylnonameHigh Temp.-High Pressures, 34
-
A. Miadonye, V.R. Puttagunta, B. Singh (1993)
Viscosity Modelling of American Crude Oil FractionsFuel Sci. Technol. Int., 11
-
A.J. Queimada, E.H. Stenby, I.M. Marrucho, J.A.P. Coutinho (2003)
A New Corresponding States Model for the Estimation of Thermophysical Properties of Long Chain n-AlkanesFluid Phase Equilib., 212
-
F. Audonnet, A.A.H. Pádua (2004)
Viscosity and Density of Mixtures of Methane and n-Decane from 298 to 393 K and up to 75 MPaFluid Phase Equilib., 216
-
J.H. Dymond, H.A. Øye (1994)
Viscosity of Selected n-AlkanesJ. Phys. Chem. Ref. Data, 23
-
J. Shanshool, E.T. Hashim (2001)
Kinematic Viscosity-Temperature Correlation for Undefined Petroleum Fraction of a Wide Boiling RangePet. Sci. Technol., 19
-
C. Boned, C.K. Zéberg-Mikkelsen, A. Baylaucq, P. Daugé (2003)
High-Pressure Dynamic Viscosity and Density of Two Synthetic Hydrocarbon Mixtures Representative of Some Heavy Petroleum Distillation CutsFluid Phase Equilib., 212
-
M.J. Assael, H.M.T. Avelino, N.K. Dalaouti, J.M.N.A. Farefeira, K.R. Harris (2001)
Reference Correlation for the Viscosity of Liquid Toluene from 213 to 373 K at Pressures to 250 MPaInt. J. Thermophys., 22
-
V.R. Puttagunta, A. Miadonye, B. Singh (1992)
Viscosity-Temperature Correlation for Prediction of Kinematic Viscosity of Conventional Petroleum LiquidChem. Eng. Res. Des., 70
-
H.M. Moharam, M.A. Fahim (1995)
Prediction of Viscosity of Heavy Petroleum Fractions Oils Using a Corresponding States MethodInd. Eng. Chem. Res., 34
-
M.B. Amin, R.N. Maddox (1980)
Estimate Viscosity Vs TemperatureHydrocarbon Process., 59
-
M. Kanti, H. Zhou, S. Ye, C. Boned, B. Lagorette, H. Saint-Guirons, P. Xans, F. Montel (1989)
Viscosity of Liquid Hydrocarbons, Mixtures and Petroleum Cuts, as a Function of Pressure and TemperatureJ. Phys. Chem., 93
-
D. Ducoulombier, H. Zhou, C. Boned, J. Peyrelasse, H. Saint-Guirons, P. Xans (1986)
Pressure (1–1000 bars) and Temperature (20–100 °C) Dependence of the Viscosity of Liguid HydrocarbonsJ. Phys. Chem., 90
- Publisher
- Springer Journals
- Copyright
- Copyright © 2006 by ASM International
- Subject
- Materials Science; Characterization and Evaluation of Materials; Tribology, Corrosion and Coatings; Quality Control, Reliability, Safety and Risk; Engineering Design
- ISSN
- 1059-9495
- eISSN
- 1544-1024
- DOI
- 10.1361/105994906X83529
- Publisher site
- See Article on Publisher Site
Abstract
Viscosity-temperature correlation has been developed for light hydrocarbon solvents. The correlation is based on one-parameter viscosity model developed by Puttagunta et al. (Chem. Eng. Res. Des., Vol 70, 1992, p 627–631) for conventional crude oils, which has been modified by incorporating a solvent viscosity reduction factor, Ф. The correlation was compared with the model of Puttagunta et al. on 22 light hydrocarbon solvents for a total of 318 data points. The average absolute deviation improves to 1.9%, compared with 2.2% obtained with the model over a temperature range from −54.41 to 160 °C. The correlation can accurately predict the viscosity of any light hydrocarbon solvent without the need to determine multiple characteristic parameters. This eliminates the consumption of time, energy, and money by costly and cumbersome calculations.
Journal
Journal of Materials Engineering and Performance – Springer Journals
Published: Mar 24, 2007