Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Comparison of experiments and computations for cold gas spraying through a mask. Part 2

Comparison of experiments and computations for cold gas spraying through a mask. Part 2 Abstract This paper presents experimental and simulation results of cold spray coating deposition using the mask placed above the plane substrate at different distances. Velocities of aluminum (mean size ~ 30 μm) and copper (mean size ~ 60 μm) particles in the vicinity of the mask are determined. It was found that particle velocities have angular distribution in flow with a representative standard deviation of 1.5–2 degrees. Modeling of coating formation behind the mask with account for this distribution was developed. The results of model agree with experimental data confirming the importance of particle angular distribution for coating deposition process in the masked area. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Thermophysics and Aeromechanics Springer Journals

Comparison of experiments and computations for cold gas spraying through a mask. Part 2

Download PDF
12 pages

Loading next page...
 
/lp/springer-journals/comparison-of-experiments-and-computations-for-cold-gas-spraying-ViwYtzjEoB
Publisher
Springer Journals
Copyright
2017 Pleiades Publishing, Ltd.
ISSN
0869-8643
eISSN
1531-8699
DOI
10.1134/S0869864317020068
Publisher site
See Article on Publisher Site

Abstract

Abstract This paper presents experimental and simulation results of cold spray coating deposition using the mask placed above the plane substrate at different distances. Velocities of aluminum (mean size ~ 30 μm) and copper (mean size ~ 60 μm) particles in the vicinity of the mask are determined. It was found that particle velocities have angular distribution in flow with a representative standard deviation of 1.5–2 degrees. Modeling of coating formation behind the mask with account for this distribution was developed. The results of model agree with experimental data confirming the importance of particle angular distribution for coating deposition process in the masked area.

Journal

Thermophysics and Aeromechanics – Springer Journals

Published: Mar 1, 2017

References

  • A method of “cold” gas-dynamic deposition
    A.P. Alkhimov, V.F. Kosarev, A.N. Papyrin
  • Influence of helium and nitrogen gases on the properties of cold gas dynamic sprayed pure titanium coatings
    W. Wong, E. Irissou, A.N. Ryabinin, J.-G. Legoux, S. Yue
  • Effect of particle morphology and size distribution on cold-sprayed pure titanium coatings
    W. Wong, P. Vo, E. Irissou, A.N. Ryabinin, J.-G. Legoux, S. Yue
  • Cold spray deposition of 316L stainless steel coatings on aluminum surface with following laser post-treatment
    A. Sova, S. Grigoriev, A. Okunkova, I. Smurov
  • Influence of impact angle and gas temperature on mechanical properties of titanium cold spray deposits
    K. Binder, J. Gottschalk, M. Kollenda, F. Gaertner, T. Klassen
  • Manufacturing and macroscopic properties of cold sprayed Cu-In coating material for sputtering target
    Y.-M. Jin, J.-H. Cho, D.-Y. Park, J.-H. Kim, K.-A. Lee
  • Influence of TGO composition on the thermal shock lifetime of thermal barrier coatings with cold-sprayed MCrAlY bond coat
    Y. Li, Ch.-J. Li, Q. Zhang, G.-J. Yang, Ch.-X. Li
  • Effect of process gas flow on the coating microstructure and mechanical properties of vacuum kinetic-sprayed TiN layers
    F. Cao, H. Park, J. Heo, J. Kwon, C. Lee
  • Deposition of Al2O3 powders using nano-particle deposition system
    W. Song, K. Jung, D.-M. Chun, S.-H. Ahn, C.S. Lee
  • Metallic coating of aerospace carbon/epoxy composites by the pulsed gas dynamic spraying process
    F. Robitaille, M. Yandouzi, S. Hind, B. Jodoin
  • Preparation of metallic coatings on polymer matrix composites by cold spray
    X.I. Zhou, A.F. Chen, J.C. Liu, X.K. Wu, J.S. Zhang
  • Deposition of metallic coatings on polymer surfaces using cold spray
    R. Lupoi, W.E. O'Neill
  • Powder stream characteristics in cold spray nozzles
    R. Lupoi, W. O'Neill
  • Cold gas spray titanium coatings onto biocompatible polymer
    M. Gardon, A. Latorre, M. Torrell, S. Dosta, J. Fernandez, J.M. Guilemany
  • Numerical and experimental investigation of cold spray gas dynamic effects for polymer coating
    A.S. Alhulaifi, G.A. Buck, W.J. Arbegast
  • Cold spray deposition of thermoplastic powder
    Y. Xu, I.M. Hutchings
  • Cold spray deposition of copper electrodes on silicon and glass substrates
    D.-Y. Kim, J.-J. Park, J.-G. Lee, D. Kim, S.J. Tark, S. Ahn, J.H. Yun, J. Gwak, K.H. Yoon, S. Chandra, S.S. Yoon
  • Parameters of the gas-powder supersonic jet in cold spraying using a mask
    A. Sova, M. Doubenskaia, S. Grigoriev, A. Okunkova, I. Smurov
  • Net shape fins for compact heat exchanger produced by cold spray
    Y. Cormier, Ph. Dupuis, B. Jodoin, A. Corbeil
  • Finite element analysis and failure mode characterization of pyramidal fin arrays produced by masked cold gas dynamic spray
    Y. Cormier, Ph. Dupuis, B. Jodoin, A. Ghaei
  • Formation of coating with cold spray technology behind a mask
    V.F. Kosarev
  • Application of mask for cold spray coating production
    N.S. Ryashin
  • Effect of mask on particle velocity distribution under cold spray conditions
  • Experimental study of cold gas spraying through a mask. Part1
    S.V. Klinkov, V.F. Kosarev, N.S. Ryashin, V.S. Shikalov
  • Conical separation zone formation at impingement of supersonic jet on obstacle under cold spraying
    A.P. Alkhimov, V.F. Kosarev, S.V. Klinkov, A.A. Sova, G.V. Trubacheev, V.N. Zaikovsky
  • Effect of a conical separation region on cold gasdynamic spraying
    A.P. Alkhimov, V.F. Kosarev, S.V. Klinkov, A.A. Sova
  • Ch. Lee Measurement of particle velocity and characterization of deposition in aluminum alloy kinetic spraying process
    J. Wu, H. Fang, S. Yoon, H.J. Kim
  • Mathematical Handbook for Scientists and Engineers, McGraw-Hill Book Company New York
    T.M. Korn
  • Measurements of cold spray deposition efficiency
    S.V. Klinkov, V.F. Kosarev
  • Modeling of particle-substrate adhesive interaction under the cold spray process
    A.N. Papyrin