Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Chelating ionophores based electrochemical sensor for Hg(II) ions

Chelating ionophores based electrochemical sensor for Hg(II) ions Poly(vinyl chloride) (PVC)-based membranes of pyrimidines, 1-(2′-aminoaryl)-4, 4, 6-trimethyl-1, 4, 5, 6-tetrahydro-6-hydroxypyrimidine-2-thiol (HPT) (R = −H, −CH3, −OCH3) with sodium tetraphenylborate (NaTPB) as an anion inhibitor and dibutylphthalate (DBP), dioctylphthalate (DOP), dibutyl (butyl) phosphonate (DBBP) and 1-chloro naphthalene (CN) as plasticizing solvent mediators were prepared and used as Hg2+ selective electrodes. Optimum performance was observed with the membrane having HPT(−OCH3)−PVC−NaTPB−DOP in the ratio 1:33:1:65 (w/w). The electrode works well over a wide concentration range 5.0 × 10−6−1.0 × 10−1 M (detection limit 1.0 ppm) with Nernstian compliance (29.5 mV decade−1) between pH 2.5 and 4.0 with a fast response time of about 20 s. The selectivity coefficient values of the order of 0.001 for mono-, bi- and trivalent cations, indicate high selectivity for Hg2+ ions over these cations. Further, anions such as Cl− and SO 4 2− do not interfere in the functioning of Hg2+ sensor. The electrodes were used over a period of five months with good reproducibility (std. dev. ±0.2 mV) and the performance of the electrodes was found satisfactory even up to 10% nonaqueous medium. The electrode assembly was also evaluated for potentiometric determination of Hg2+. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Journal of Applied Electrochemistry Springer Journals

Chelating ionophores based electrochemical sensor for Hg(II) ions

Loading next page...
 
/lp/springer-journals/chelating-ionophores-based-electrochemical-sensor-for-hg-ii-ions-kIEfnlmZNS

References (16)

Publisher
Springer Journals
Copyright
Copyright © 2004 by Kluwer Academic Publishers
Subject
Chemistry; Physical Chemistry; Industrial Chemistry/Chemical Engineering; Electrochemistry
ISSN
0021-891X
eISSN
1572-8838
DOI
10.1023/B:JACH.0000016612.99921.b6
Publisher site
See Article on Publisher Site

Abstract

Poly(vinyl chloride) (PVC)-based membranes of pyrimidines, 1-(2′-aminoaryl)-4, 4, 6-trimethyl-1, 4, 5, 6-tetrahydro-6-hydroxypyrimidine-2-thiol (HPT) (R = −H, −CH3, −OCH3) with sodium tetraphenylborate (NaTPB) as an anion inhibitor and dibutylphthalate (DBP), dioctylphthalate (DOP), dibutyl (butyl) phosphonate (DBBP) and 1-chloro naphthalene (CN) as plasticizing solvent mediators were prepared and used as Hg2+ selective electrodes. Optimum performance was observed with the membrane having HPT(−OCH3)−PVC−NaTPB−DOP in the ratio 1:33:1:65 (w/w). The electrode works well over a wide concentration range 5.0 × 10−6−1.0 × 10−1 M (detection limit 1.0 ppm) with Nernstian compliance (29.5 mV decade−1) between pH 2.5 and 4.0 with a fast response time of about 20 s. The selectivity coefficient values of the order of 0.001 for mono-, bi- and trivalent cations, indicate high selectivity for Hg2+ ions over these cations. Further, anions such as Cl− and SO 4 2− do not interfere in the functioning of Hg2+ sensor. The electrodes were used over a period of five months with good reproducibility (std. dev. ±0.2 mV) and the performance of the electrodes was found satisfactory even up to 10% nonaqueous medium. The electrode assembly was also evaluated for potentiometric determination of Hg2+.

Journal

Journal of Applied ElectrochemistrySpringer Journals

Published: Oct 17, 2004

There are no references for this article.