Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

C-Based Design Methodology and Topological Change for an Indian Agricultural Tractor Component

C-Based Design Methodology and Topological Change for an Indian Agricultural Tractor Component The failure of tractor components and their replacement has now become very common in India because of re-cycling, re-sale, and duplication. To over come the problem of failure we propose a design methodology for topological change co-simulating with software’s. In the proposed Design methodology, the designer checks Paxial, Pcr, Pfailue, τ by hand calculations, from which refined topological changes of R.S.Arm are formed. We explained several techniques employed in the component for reduction, removal of rib material to change center of gravity and centroid point by using system C for mixed level simulation and faster topological changes. The design process in system C can be compiled and executed with software, TURBO C7. The modified component is developed in proE and analyzed in ANSYS. The topologically changed component with slot 120 × 4.75 × 32.5 mm at the center showed greater effectiveness than the original component. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Journal of The Institution of Engineers (India): Series A Springer Journals

C-Based Design Methodology and Topological Change for an Indian Agricultural Tractor Component

Download PDF
12 pages

Loading next page...
 
/lp/springer-journals/c-based-design-methodology-and-topological-change-for-an-indian-k8vT0pUDJ4
Publisher
Springer Journals
Copyright
Copyright © 2018 by The Institution of Engineers (India)
Subject
Engineering; Civil Engineering
ISSN
2250-2149
eISSN
2250-2157
DOI
10.1007/s40030-018-0270-2
Publisher site
See Article on Publisher Site

Abstract

The failure of tractor components and their replacement has now become very common in India because of re-cycling, re-sale, and duplication. To over come the problem of failure we propose a design methodology for topological change co-simulating with software’s. In the proposed Design methodology, the designer checks Paxial, Pcr, Pfailue, τ by hand calculations, from which refined topological changes of R.S.Arm are formed. We explained several techniques employed in the component for reduction, removal of rib material to change center of gravity and centroid point by using system C for mixed level simulation and faster topological changes. The design process in system C can be compiled and executed with software, TURBO C7. The modified component is developed in proE and analyzed in ANSYS. The topologically changed component with slot 120 × 4.75 × 32.5 mm at the center showed greater effectiveness than the original component.

Journal

Journal of The Institution of Engineers (India): Series A – Springer Journals

Published: Feb 13, 2018

References

  • Applying virtual reality techniques to the interactive stress analysis of a tractor lift arm
    Ryken, MJ
  • Integration of CAD/CAM and rapid prototyping in product development: a review
    Matta, AK; Raju, DR; Suman, KNS
  • A decision support system for selection of tractor-implement system used on Indian farms
    Mehta, CR; Singh, K; Selva, MM
  • A mixed-level virtual prototyping environment for system C-based design methodology
    Park, S; Yoon, S; Chae, S-I
  • Using failure mode and effects analysis to design a comfortable automotive driver seat
    Kolich, M
  • Modeling and optimization of rapid prototyping for an agricultural tractor component
    Matta, AK; Raju, DR; Suman, KNS