Access the full text.
Sign up today, get DeepDyve free for 14 days.
Loading next page...
/lp/springer-journals/a-pulse-plating-method-for-the-electrosynthesis-of-znse-008r8W7Z7Z
References (18)
-
G. Riveros, D. Lincot, J. Guillemoles, R. Henríquez, R. Schrebler, R. Córdova, H. Gómez (2003)
Redox and solution chemistry of the SeSO32−–Zn–EDTA2− system and electrodeposition behavior of ZnSe from alkaline solutionsJournal of Electroanalytical Chemistry, 558
-
V. Swaminathan, K. Murali (2000)
Influence of pulse reversal on the PEC performance of pulse-plated CdSe filmsSolar Energy Materials and Solar Cells, 63
-
N. Ibl, J. Puippe, H. Angerer (1978)
Electrocrystallization in pulse electrolysisSurface Technology, 6
-
M. Bouroushian, Tatjana Kosanovic, Z. Loizos, N. Spyrellis (2002)
Electrochemical formation of zinc selenide from acidic aqueous solutionsJournal of Solid State Electrochemistry, 6
-
G. Morris, R. Vanderveen (1993)
Cadmium telluride films prepared by pulsed electrodepositionSolar Energy Materials and Solar Cells, 30
-
D. Gal, G. Hodes (2000)
Electrochemical Deposition of ZnSe and (Zn,Cd)Se Films from Nonaqueous SolutionsJournal of The Electrochemical Society, 147
-
S. Sanchez, C. Lucas, G. Picard, M. Bermejo, Y. Castrillejo (2000)
Molten salt route for ZnSe high-temperature electrosynthesisThin Solid Films, 361
-
A. Samantilleke, M. Boyle, J. Young, I. Dharmadasa (1998)
Growth of n-type and p-type ZnSe thin films using an electrochemical technique for applications in large area optoelectronic devicesJournal of Materials Science: Materials in Electronics, 9
-
C. Natarajan, M. Sharon, C. Lévy‐Clément, M. Neumann-Spallart (1994)
Electrodeposition of zinc selenideThin Solid Films, 237
-
T. Chu, S. Chu, G. Chen, J. Britt, C. Ferekides, C. Wu (1992)
Zinc selenide films and heterojunctionsJournal of Applied Physics, 71
-
S. Babu, R. Dhanasekaran, P. Ramasamy (1991)
Electrodeposition of CdTe by potentiostatic and periodic pulse techniquesThin Solid Films, 202
-
S. Babu, T. Rajalakshmi, R. Dhanasekaran, P. Ramasamy (1991)
Electrodeposition of CdSexTe1 − x by periodic pulse techniqueJournal of Crystal Growth, 110
-
T. Niina, K. Yoneda, T. Toda (1983)
Dependence of the Characteristics of ZnSe MBE Grown on GaAs and GaP on Thermal Treatment in a VacuumJournal of The Electrochemical Society, 130
-
R. Henríquez, H. Gómez, G. Riveros, J. Guillemoles, M. Froment, D. Lincot (2004)
A novel approach for the electrodeposition of epitaxial films of ZnSe on (111) and (100) InP using dimethylsulfoxide as a solventElectrochemical and Solid State Letters, 7
-
T. Kosanovic, M. Bouroushian, N. Spyrellis (2005)
Soft growth of the ZnSe compound from alkaline selenosulfite solutionsMaterials Chemistry and Physics, 90
-
J. Puippe, N. Ibl (1980)
Influence of charge and discharge of electric double layer in pulse platingJournal of Applied Electrochemistry, 10
-
C. Chang, C. Lee (2000)
Characterization and fabrication of ZnSe epilayer on porous silicon substrateThin Solid Films, 379
-
J. Wang, D. Balamurugan, D. Chin (1992)
An experimental study of mass transfer in pulse reversal platingJournal of Applied Electrochemistry, 22
- Publisher
- Springer Journals
- Copyright
- Copyright © 2006 by Springer Science+Business Media, Inc.
- Subject
- Chemistry; Industrial Chemistry/Chemical Engineering; Physical Chemistry ; Electrochemistry
- ISSN
- 0021-891X
- eISSN
- 1572-8838
- DOI
- 10.1007/s10800-006-9141-z
- Publisher site
- See Article on Publisher Site
Abstract
Polycrystalline, thin films of ZnSe semiconductor compound were formed by cathodic electrodeposition from acidic aqueous selenite solutions of zinc sulphate, by using a potentiodynamic technique involving the application of repeated double pulses of controlled potential. Conditions for obtaining coherently uniform deposits with enhanced ZnSe to Se ratios were specified, on the basis of X-ray diffraction (XRD) and scanning electron microscopy results, by investigating the combined effect of the potential and length of each pulse as determined by duty cycle and frequency. It was shown that pulse plating process is a viable alternative to potentiostatic electrodeposition allowing improved control of the solid phase composition.
Journal
Journal of Applied Electrochemistry – Springer Journals
Published: May 10, 2006