to

Reset filters

A review on 3D micro-additive manufacturing technologies

A review on 3D micro-additive manufacturing technologies New microproducts need the utilization of a diversity of materials and have complicated three-dimensional (3D) microstructures with high aspect ratios. To date, many micromanufacturing processes have been developed but specific class of such processes are applicable for fabrication of functional and true 3D microcomponents/assemblies. The aptitude to process a broad range of materials and the ability to fabricate functional and geometrically complicated 3D microstructures provides the additive manufacturing (AM) processes some profits over traditional methods, such as lithography-based or micromachining approaches investigated widely in the past. In this paper, 3D micro-AM processes have been classified into three main groups, including scalable micro-AM systems, 3D direct writing, and hybrid processes, and the key processes have been reviewed comprehensively. Principle and recent progress of each 3D micro-AM process has been described, and the advantages and disadvantages of each process have been presented. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png The International Journal of Advanced Manufacturing Technology Springer Journals

A review on 3D micro-additive manufacturing technologies

34 pages
Read Article

Loading next page...
 
/lp/springer-journal/a-review-on-3d-micro-additive-manufacturing-technologies-EHJoWQ00Wm
Publisher
Springer London
Copyright
Copyright © 2012 by Springer-Verlag London
Subject
Engineering; Industrial and Production Engineering; Production/Logistics/Supply Chain; Mechanical Engineering; Computer-Aided Engineering (CAD, CAE) and Design
ISSN
0268-3768
eISSN
1433-3015
D.O.I.
10.1007/s00170-012-4605-2
Publisher site
See Article on Publisher Site

Abstract

New microproducts need the utilization of a diversity of materials and have complicated three-dimensional (3D) microstructures with high aspect ratios. To date, many micromanufacturing processes have been developed but specific class of such processes are applicable for fabrication of functional and true 3D microcomponents/assemblies. The aptitude to process a broad range of materials and the ability to fabricate functional and geometrically complicated 3D microstructures provides the additive manufacturing (AM) processes some profits over traditional methods, such as lithography-based or micromachining approaches investigated widely in the past. In this paper, 3D micro-AM processes have been classified into three main groups, including scalable micro-AM systems, 3D direct writing, and hybrid processes, and the key processes have been reviewed comprehensively. Principle and recent progress of each 3D micro-AM process has been described, and the advantages and disadvantages of each process have been presented.

Journal

The International Journal of Advanced Manufacturing Technology – Springer Journals

Published: Nov 25, 2012

References

  • Modelling of micropumps using unimorph piezoelectric actuators and ball valves
    Accoto, D; Carrozza, MC; Dario, P
  • Conformal printing of electrically small antennas on three-dimensional surfaces
    Adams, JJ; DUOSS, EB; Malkowski, TF; Motala, MJ; Ahn, BY; Nuzzo, RG; Bernhard, JT; Lewis, JA
    Bookmark
  • Freeform fabrication by controlled droplet deposition of powder filled melts
    Ainsley, C; Reis, N; Derby, B
  • Micro engineering
    Alting, L; Kimura, F; Hansen, HN; Bissacco, G
    Bookmark
  • Fabrication of 3D chitosan-hydroxyapatite scaffolds using a robotic dispensing system
    Ang, TH; Sultana, FSA; Hutmacher, DW; Wong, YS; Fuh, JYH; Mo, XM; Loh, HT; Burdet, E; Teoh, SH
  • Stereolithography of spatially controlled multi-material bioactive poly(ethylene glycol) scaffolds
    Arcaute, K; Mann, B; Wicker, R
  • Direct-Write Assembly of 3D Hydrogel Scaffolds for Guided Cell Growth
    Barry, RA; Shepherd, RF; Hanson, JN; Nuzzo, RG; Wiltzius, P; Lewis, JA
  • Biological laser printing: a novel technique for creating heterogeneous 3-dimensional cell patterns
    Barron, JA; Wu, P; Ladouceur, HD; Ringeisen, BR
  • Stereolithography: materials, processes and applications
    Bartolo, PJ
  • Metal filled resin for stereolithography metal part
    Bartolo, PJ; Gaspar, J
  • Fabrication of microstructures with high aspect ratios and great structural heights by synchrotron radiation lithography, galvanoforming, and plastic moulding (LIGA process)
    Becker, EW; Ehrfeld, W; Hagmann, P; Maner, A; Munchmeyer, D
  • Rapid prototyping of small size objects
    Bertsch, A; Bernhard, P; Vogt, C; Renaud, P
  • Static micromixers based on large-scale industrial mixer geometry
    Bertsch, A; Heimgartner, S; Cousseau, P; Renaud, P
  • Microfabrication of ceramic components by microstereolithography
    Bertsch, A; Jiguet, S; Renaud, P
  • 3D microfabrication by combining microstereolithography and thick resist UV lithography
    Bertsch, A; Lorenz, H; Renaud, P
  • Microstereophotolithography using a liquid crystal display as dynamic mask generator
    Bertsch, A; Zissi, S; Jezequel, JY; Corbel, S; Andre, JC
  • Study of the spatial resolution of a new 3D micro fabrication process; the microstereolithography using a dynamic mask-generator technique
    Bertsch, A; Jezequel, YJ; Andre, JC
  • Handbook of nanotechnology
    Bhushan, B
  • A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
    Billiet, T; Vandenhaute, M; Schelfhout, J; Vlierberghe, S; Dubruel, P
  • In-situ photopolymerization of oriented liquid-crystalline acrylates
    Broer, DJ; Mol, GN; Challa, G
  • Some recent advances in multi-material micro- and nano-manufacturing
    Brousseau, EB; Dimov, SS; Pham, DT
  • Freeform fabrication of aluminum parts by direct deposition of molten aluminum
    Cao, W; Miyamoto, Y
  • Direct inkjet printing of Si3N4: characterization of ink, green bodies and microstructure
    Cappi, B; Özkol, E; Ebert, J; Telle, R
  • Three-dimensional printing of shape memory alloys
    Carreño-Morelli, E; Martinerie, S; Bidaux, JE
  • A piezoelectric-driven stereolithography-fabricated micropump
    Carrozza, MC; Croce, N; Magnani, B; Dario, P
  • Solid freeform fabrication of ceramics
    Cawley, JD
  • UV microstereolithography system that uses spatial light modulator technology
    Chatwin, CR; Farsari, M; Huang, S; Heywood, HI; Birch, PM; Young, RCD; Richardson, JD
  • Rapid prototyping: principles and applications
    Chua, CK; Leong, KF; Lim, CS
  • Selective laser melting of high aspect ratio 3D nickel–titanium structures two way trained for MEMS applications
    Clare, AT; Chalker, PR; Davies, S; Sutcliffe, CJ; Tsopanos, S
  • Microscale metal additive manufacturing of multi-component medical devices
    Cohen, A; Chen, R; Frodis, U; Wu, MT; Folk, C
  • The MEMS handbook
    Cohen, A; Kruglick, E
  • The discovery and development of onium salt cationic photoinitiators
    Crivello, JV
  • Using SALDVI and SALD with multi-material structures
    Crocker, JE; Harrison, S; Sun, LLL; Marcus, HL
  • Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication
    Cumpston, BH; Ananthavel, SP; Barlow, S; Dyer, DL; Ehrlich, JE; Erskine, LL; Heikal, AA; Kuebler, SM; Lee, IYS; McCord-Maughon, D; Qin, J; Röckel, H; Rumi, M; Wu, XL; Marder, SR; Perry, JW
  • Use of two-photon excitation for erasablerewritable three-dimensional bit optical data storage in a photorefractive polymer
    Day, D; Gu, M
  • Low-cost micro-optical modules for board level optical interconnections
    Debaes, C; Vervaeke, M; Volckaerts, B; Erps, J; Desmet, L; Ottevaere, H; Vynck, P; Gomez, V; Hermanne, A; Thienpont, H
  • Inkjet printing of highly loaded particulate suspensions
    Derby, B; Reis, N
  • Direct laser writing of three-dimensional photonic-crystal templates for telecommunications
    Deubel, M; Freymann, G; Wegener, M; Pereira, S; Busch, K; Soukoulis, CM
  • 3D-2D-3D photonic crystal heterostructures fabricated by direct laser writing
    Deubel, M; Wegener, M; Linden, S; Freymann, G; John, S
  • Two photon induced polymerization of organic–inorganic hybrid biomaterials for microstructured medical devices
    Doraiswamy, A; Jin, C; Narayan, RJ; Mageswaran, P; Mente, P; Modi, R; Auyeung, R; Chrisey, DB; Ovsianikov, A; Chichkov, B
  • Robocasting chitosan/nanobioactive glass dual-pore structured scaffolds for bone engineering
    Dorj, B; Park, JH; Kim, HW
  • Oxygen diffusion in ceramic suspensions for stereolithography
    Dufaud, O; Corbel, S
  • Sol–gel Inks for Direct-Write Assembly of Functional Oxides
    Duoss, EB; Twardowski, M; Lewis, JA
  • Laser chemical vapor deposition: materials, modeling, and process control
    Duty, C; Jean, D; Lackey, WJ
  • Direct inkjet printing of dental prostheses made of zirconia
    Ebert, J; Özkol, E; Zeichner, A; Uibel, K; Weiss, O; Koops, U; Telle, R; Fischer, H
  • Direct write technologies for rapid prototyping applications
    Edinger, K
  • Study of precursor gases for focused ion beam insulator deposition
    Edinger, K; Melngailis, J; Orloff, J
  • Recent developments in deep X-ray lithography
    Ehrfeld, W; Schmidt, A
  • Solid freeforming and combinatorial research
    Evans, J; Yang, S
  • First results in laser micro sintering of ceramic materials
    Exner, H; Horn, M; Streek, A; Hartwig, L; Ebert, R
  • Selective functionalization of 3-D polymer microstructures
    Farrer, RA; LaFratta, CN; Li, L; Praino, J; Naughton, MJ; Saleh, BEA; Teich, MC; Fourkas, JT
  • The effect of photopolymerization on stem cells embedded in hydrogels
    Fedorovich, NE; Oudshroon, MH; Geemen, D; Hennink, WE; Alblas, J; Dhert, WJA
  • Three-dimensional fabrication of metallic nanostructures over large areas by two-photon polymerization
    Formanek, F; Takeyasu, N; Tanaka, T; Chiyoda, K; Ishikawa, A; Kawata, S
  • Argon-ion laser direct-write Al deposition from trialkylamine alane precursors
    Foulon, F; Stuke, M
  • Three-dimensional nanostructures for photonics
    Freymann, GV; Ledermann, A; Thiel, M; Staude, I; Essig, S; Busch, K; Wegener, M
  • Complex micromachines produced and driven by light
    Galajda, P; Ormos, P
  • Cure and rheological analysis of reinforced resins for stereolithography
    Gaspar, J; Bartolo, PJ; Duarte, FM
  • Rapid prototyping
    Gebhardt, A
  • Additive manufacturing technologies
    Gibson, I; Rosen, DW; Stucker, B
  • High volume production by RM: challenges and solutions for small parts and MEMS. International conference on additive technologies
    Gotzen, R; Reinhardt, A
  • Fast, functional prototypes via multiphase jet solidification
    Greulich, M; Greul, M; Pintat, T
  • Extrusion freeforming of ceramics through fine nozzles
    Grida, I; Evans, JRG
  • Log-pile photonic crystal fabricated by two-photon photopolymerization
    Guo, R; Li, Z; Jiang, Z; Yuan, D; Huang, W; Xia, A
  • Micro lens fabrication by means of femtosecond two photon polymerization
    Guo, R; Xiao, S; Zhai, X; Li, J; Xia, A; Huang, W
  • Three-dimensional microstructure using partitioned cross-sections in projection microstereolithography
    Ha, YM; Park, IB; Kim, HC; Lee, SH
  • Combination of Yb:YAG-disc laser and roll-based powder deposition for the micro-laser sintering
    Haferkamp, H; Ostendorf, A; Becker, H; Czerner, S; Stippler, P
  • Multi-directional micro switching valve chip with rotary mechanism
    Hasegawa, T; Nakashima, K; Omatsu, F; Ikuta, K
  • Vinyl esters: low cytotoxicity monomers for the fabrication of biocompatible 3D scaffolds by lithography based additive manufacturing
    Heller, C; Schwentenwein, M; Russmueller, G; Varga, F; Stampfl, J; Liska, R
  • Aqueous microfabrication of bioelectronic architectures
    Hill, RT; Lyon, JL; Allen, R; Stevenson, KJ; Shear, JB
  • Direct writing technology—advances and developments
    Hon, KKB; Li, L; Hutchings, IM
  • Numerical analysis of mask type stereolithography process using dynamic finite element method
    Huang, YM; Jiang, CP
  • Evaluation of chondrocyte growth in the highly porous scaffolds made by fused deposition manufacturing (FDM) filled with type II collagen
    Hung-Jen, Y; Ching-Shiow, T; Shan-Hui, H; Ching-Lin, T
  • Three-dimensional rotor fabrication by focused-ion-beam chemical-vapor deposition
    Igaki, J; Kometani, R; Nakamatsu, K; Kanda, K; Haruyama, Y; Ochiai, Y
  • A novel system for fused deposition of advanced multiple ceramics
    Jafari, MA; Han, W; Mohammadi, F
  • Bio-electros prays: The development of a promising tool for regenerative and therapeutic medicine
    Jayasinghe, SN
  • Research on accurate droplet generation for micro-droplet deposition manufacture
    Jiang, XS; Qi, LH; Luo, J; Huang, H; Zhou, JM
  • Development of controlled porosity polymer-ceramic composite scaffolds via fused deposition modeling
    Kalita, SJ; Bose, S; Hosick, HL; Bandyopadhyay, A
  • Finer features for functional microdevices
    Kawata, S; Sun, HB; Tanaka, T; Takada, K
  • Multi-nozzle deposition for construction of 3D biopolymer tissue scaffolds
    Khalil, S; Nam, J; Sun, W
  • Review: developments in micro/nanoscale fabrication by focused ion beams
    Kim, CS; Ahn, SH; Jang, DY
  • A barrier embedded Kenics micromixer
    Kim, DS; Lee, IH; Kwon, TH; Cho, DW
  • Two-component polymer scaffolds for controlled three-dimensional cell culture
    Klein, F; Richter, B; Striebel, T; Franz, CM; Freymann, GV; Wegener, M; Bastmeyer, M
  • One-step waveguide and optical circuit writing in photopolymerizable materials processed by two-photon absorption
    Klein, S; Barsella, A; Leblond, H; Bulou, H; Fort, A; Andraud, C; Lemercier, G; Mulatier, JC; Dorkenoo, K
  • Direct fabrication of ceramics, CMCs by rapid prototyping
    Klosterman, DA; Chartoff, RP; Osborne, NR; Graves, GA; Lightman, A; Han, GW; Bezeredi, A; Rodrigues, S; Pak, S; Kalmanovich, G; Dodin, L; Tu, S
  • Metal nanoparticle direct inkjet printing for low-temperature 3D micro metal structure fabrication
    Ko, SH; Chung, J; Hotz, N; Nam, KH; Grigoropoulos, CP
  • All-inkjet-printed flexible electronics fabrication on a polymer substrate by low-temperature high-resolution selective laser sintering of metal nanoparticles
    Ko, SH; Pan, H; Grigoropoulos, CP; Luscombe, CK; Fréchet, J; Poulikakos, D
  • Cell wall cutting tool and nano-net fabrication by FIB-CVD for subcellular operations and analysis
    Kometani, R; Funabiki, R; Hoshino, T; Kanda, K; Haruyama, Y; Kaito, T
  • Performance of nanomanipulator fabricated on glass capillary by focused ion-beam chemical vapor deposition
    Kometani, R; Hoshino, T; Kondo, K; Kanda, K; Haruyama, Y; Kaito, J
  • Nanomanipulator and actuator fabrication on glass capillary by focused-ion beam-chemical vapor deposition
    Kometani, R; Morita, T; Watanabe, K; Hoshino, T; Kondo, K; Kanda, K
  • Effect of oxidation on the breakup and monosized droplet generation of the molten metal jet
    Lai, WH; Chen, CC
  • Scaffold development using 3D printing with a starch-based polymer
    Lam, CXF; Mo, XM; Teoh, SH; Hutmacher, DW
  • Development of 3D PPF/DEF scaffolds using micro-stereolithography and surface modification
    Lan, PX; Lee, JW; Seol, YJ; Cho, DW
  • Rapid prototyping of scaffolds derived from thermoreversible hydrogels and tailored for applications in tissue engineering
    Landers, R; Hübner, U; Schmelzeisen, R; Mülhaupt, R
  • Desktop manufacturing of complex objects, prototypes and biomedical scaffolds by means of computer-assisted design combined with computer-guided 3D plotting of polymers and reactive oligomers
    Landers, R; Mühlhaupt, R
  • Improved surface finish in 3D printing using bimodal powder distribution
    Lanzetta, M; Sachs, E
  • Rhombicuboctahedral three-dimensional photonic quasicrystals
    Ledermann, A; Wegener, M; Freymann, G
  • Fabrication and characteristic analysis of a poly(propylene fumarate) scaffold using micro-stereolithography technology
    Lee, JW; Lan, PX; Kim, B; Lim, G; Cho, DW
  • Development of micro-stereolithography technology using metal powder
    Lee, JW; Lee, IH; Cho, DW
  • Direct synthesis and inkjetting of silver nanocrystals toward printed electronics
    Lee, KJ; Jun, BH; Kim, TH; Joung, J
  • Rapid prototyping of ceramic millimeterwave metamaterials: Simulations and experiments
    Lee, Y; Lu, X; Hao, Y; Yang, SF; Ubic, R; Evans, JRG; Parini, CG
  • Directive millimetre-wave antenna based on freeformed woodpile EBG structure
    Lee, Y; Lu, X; Hao, Y; Yang, SF; Ubic, R; Evans, JRG; Parini, CG
  • Advances in 3D nano/microfabrication using two-photon initiated polymerization
    Lee, KS; Kim, RH; Yang, DY; Park, SH
  • Low-profile directive millimeter-wave antennas using free-formed three-dimensional (3-D) electromagnetic bandgap structures
    Lee, Y; Lu, X; Hao, Y; Yang, SF; Evans, JRG; Parini, CG
  • Narrow-beam azimuthally omni-directional millimetre-wave antenna using freeformed cylindrical woodpile cavity
    Lee, Y; Lu, X; Hao, Y; Yang, SF; Evans, JRG; Parini, CG
  • Three-dimensional laser direct writing of electrically conducting and isolating microstructures
    Lehmann, O; Stuke, M
  • Dominant factors of metal jet breakup in micro droplet deposition manufacturing technique
    Lehua, Q; Xiaoshan, J; Jun, L; Xianghui, H; Hejun, L
  • Ink-jet printing of ceramic micro-pillar arrays
    Lejeune, M; Chartier, T; Dossou-Yovo, C; Noguera, R
  • Droplet generation from pulsed micro jets
    Li, R; Ashgriz, N; Chandra, S
  • Selective ablation-assisted two-photon stereolithography for effective nano- and microfabrication
    Lim, TW; Son, Y; Yang, DY; Kong, HJ; Lee, KS
  • High precision solder droplet printing technology and the state-of-the art
    Liu, Q; Orme, M
  • On precision droplet-based net-form manufacturing technology
    Liu, Q; Orme, M
  • Three-dimensional patterning of hydrogels containing living cells
    Liu, VA; Bhatia, SN
  • 3DP process for fine mesh structure printing
    Lu, K; Reynolds, WT
  • Photopolymerization of multilaminated poly(HEMA) hydrogels for controlled release
    Lu, S; Anseth, KS
  • Dose uniformity of fine powders in ultrasonic microfeeding
    Lu, X; Yang, S; Evans, JRG
  • Fabrication of electromagnetic crystals by extrusion freeforming
    Lu, X; Lee, Y; Yang, SF; Hao, Y; Ubic, R; Evans, JRG; Parini, CG
  • Fabrication of millimeter-wave electromagnetic bandgap crystals using microwave dielectric powders
    Lu, X; Lee, Y; Yang, SF; Hao, Y; Ubic, R; Evans, JRG; Parini, CG
  • Fine lattice structures fabricated by extrusion freeforming: process variables
    Lu, X; Lee, Y; Yang, SF; Hao, Y; Evans, JRG; Parini, CG
  • Extrusion freeforming of millimeter wave electromagnetic bandgap (EBG) structures
    Lu, X; Lee, Y; Yang, SF; Hao, Y; Evans, JRG; Parini, CG
  • Solvent-based paste extrusion solid freeforming
    Lu, X; Lee, Y; Yang, SF; Hao, Y; Evans, JRG; Parini, CG
  • Novel methods to fabricate macroporous 3D carbon scaffolds and ordered surface mesopores on carbon filaments
    Lu, XS; Chen, LF; Amini, N; Yang, SF; Evans, JRG; Guo, ZX
  • Three-dimensional microfabrication by localized electrochemical deposition
    Madden, JD; Hunter, IW
  • Fundamentals of microfabrication: the science of miniaturization
    Madou, MJ
  • Characterization of tissue-engineered scaffolds microfabricated with PAM
    Mariani, M; Rosatini, F; Vozzi, G; Previti, A; Ahluwalia, A
  • Submicron manipulation tools driven by light in a liquid
    Maruo, S; Ikuta, K; Korogi, H
  • Two-photon-absorbed near-infrared photopolymerization for three-dimensional microfabrication
    Maruo, S; Kawata, S
  • State of the art of micro-machining
    Masuzawa, T
  • Focused-ion-beam deposition for 3-D nanostructure fabrication
    Matsui, S
  • A review on stereolithography and its applications in biomedical engineering
    Melchels, FPW; Feijen, J; Grijpma, DW
  • Additive manufacturing of tissues and organs
    Melchels, FPW; Domingos, MAN; Klein, TJ; Malda, J; Bartolo, PJ; Hutmacher, DW
  • Concentrated hydroxyapatite inks for direct-write assembly of 3-D periodic scaffolds
    Michna, S; Wu, W; Lewis, JA
  • Fabrication of refractive microlens arrays by excimer laser ablation of amorphous teflon
    Mihailov, S; Lazare, S
  • Mechanical properties of calcium phosphate scaffolds fabricated by robocasting
    Miranda, P; Pajares, A; Saiz, E; Tomsia, AP; Guiberteau, F
  • Bioprinting living structures
    Mironov, V; Prestwich, G; Forgacs, G
  • Fabrication and properties of metalo-dielectric photonic crystal structures for infrared spectral region
    Mizeikis, V; Juodkazis, S; Tarozaite, R; Juodkazyte, J; Juodkazis, K; Misawa, H
  • Microstereolithography using dynamic mask generator and a non-coherent visible light source
    Monneret, S; Loubere, V; Corbel, S
  • Microfabrication of freedom and articulated alumina-based components
    Monneret, S; Provin, C; Gall, HL; Corbel, S
  • Focused ion beam mask repair
    Morgan, JC
  • Direct write technologies for rapid prototyping applications
    Nagel, DJ
  • Reaction heat effects on initial linear shrinkage and deformation in stereolithography
    Narahara, H; Tanaka, F; Kishinami, T; Igarashi, S; Saito, K
  • Direct laser writing of surface reliefs in dry self-developing photopolymer films
    Neumann, J; Wieking, KS; Kip, D
  • 3D fine scale ceramic components formed by ink-jet prototyping process
    Noguera, R; Lejeune, M; Chartier, T
  • Cross-section segmentation for improving the shape accuracy of microstructure array in projection microstereolithography
    Park, IB; Ha, YM; Lee, SH
  • Fabrication of a bunch of sub-30-nm nanofibers inside microchannels using photopolymerization via a long exposure technique
    Park, SH; Lim, TW; Yang, DY; Kim, RH; Lee, KS
  • Biocompatible Silk Printed Optical Waveguides
    Parker, ST; Domachuk, P; Amsden, J; Bressner, J; Lewis, JA; Kaplan, DL; Omenetto, FG
  • Complex ceramic-polymer composite microparts made by microstereolithography
    Provin, C; Monneret, S
  • Three-dimensional ceramic microcomponents made using microstereolithography
    Provin, C; Monneret, S; Gall, HL; Corbel, S
  • Micro-manufacturing engineering and technology
    Qin, Y
  • Micro manufacturing: research, technology outcomes and development issues
    Qin, Y; Brockett, A; Ma, Y; Razali, A; Zhao, J; Harrison, C; Pan, W; Dai, X; Loziak, D
  • A systematic approach to process selection in MEMS
    Quinn, DJ; Spearing, SM; Ashby, MF; Fleck, NA
  • Laser micro sintering: a versatile instrument for the generation of microparts
    Regenfuss, P; Ebert, R; Exner, H
  • Industrial freeform generation of micro tools by laser micro sintering
    Regenfuss, P; Hartwig, L; Klötzer, S; Ebert, R; Brabant, TH; Petsch, T; Exner, H
  • Principles of laser micro sintering
    Regenfuss, P; Streek, A; Hartwig, L; Klötzer, S; Brabant, TH; Horn, M; Ebert, R; Exner, H
  • Laser-fabricated dielectric optical components for surface plasmon polaritons
    Reinhardt, C; Passinger, S; Chichkov, B; Marquart, C; Radko, I; Bozhevolnyi, S
  • A review of focused ion beam applications in microsystem technology
    Reyntjens, S; Puers, R
  • Industrial photochemistry XXIV. Relations between light flux and polymerized depth in laser stereolithography
    Scheffer, P; Bertsch, A; Corbel, S; Jejequel, JY; Andre, JC
  • Three-dimensional cell growth on structures fabricated from ORMOCER by two-photon polymerization technique
    Schlie, S; Ngezahayo, A; Ovsianikov, A; Fabian, T; Kolb, HA; Haferkamp, H; Chichkov, BN
  • Laser direct writing of combinatorial libraries of idealized cellular constructs: Biomedical applications
    Schiele, NR; Koppes, RA; Corr, DT; Ellison, KS; Thompson, DM; Ligon, LA; Lippert, TKM; Chrisey, DB
  • Bioprinting of hybrid tissue constructs with tailorable mechanical properties
    Schuurman, W; Khristov, V; Pot, MW; Weeren, PR; Dhert, WJA; Malda, J
  • Gelatin-based photopolymers for bone replacement materials
    Schuster, M; Turecek, C; Weigel, G; Saf, R; Stampfl, J; Varga, F; Liska, R
  • Three-dimensional spiral—architecture photonic crystals obtained by direct laser writing
    Seet, KK; Mizeikis, V; Matsuo, S; Juodkazis, S; Misawa, H
  • Three dimensional printing of porous ceramic scaffolds for bone tissue engineering
    Seitz, H; Rieder, W; Leukers, B; Tille, C
  • Three-dimensional nanostructuring of hybrid materials by two-photon polymerization
    Serbin, J; Chichkov, BN; Houbertz, R
  • Photofabrication of a photonic crystal using interference of a UV laser
    Shoji, S; Smith, N; Kawata, S
  • Photofabrication of wood-pile three-dimensional photonic crystals using four-beam interference
    Shoji, S; Sun, HB; Kawata, S
  • In vivo bone response to 3D periodic hydroxyapatite scaffolds assembled by direct ink writing
    Simon, JL; Michna, S; Lewis, JA; Rekow, ED; Thompson, VP; Smay, JE; Yampolsky, A; Parsons, JR; Ricci, JL
  • Directed colloidal assembly of 3D periodic structures
    Smay, JE; Gratson, GM; Shepherd, RF; Cesarano, J; Lewis, JA
  • Fabrication and moulding of cellular materials by rapid prototyping
    Stampfl, J; Fouad, H; Seidler, S; Liska, R; Schwager, F; Woesz, A; Fratzl, P
  • Waveguides in three-dimensional photonic-bandgap materials by direct laser writing and silicon double inversion
    Staude, I; Freymann, G; Essig, S; Busch, K; Wegener, M
  • Complex-shaped three-dimensional microstructures and photonic crystals generated in a polysiloxane polymer by two-photon micro-stereo-lithography
    Straub, M; Nguyen, LH; Fazlic, A; Gu, M
  • Multiple higher-order stop gaps in infrared polymer photonic crystals
    Straub, M; Ventura, M; Gu, M
  • Laser- direct-write creation of three-dimensional orest microcages for contact-free trapping, handling and transfer of small polarizable neutral objects in solution
    Stuke, M; Mueller, K; Mueller, T; Hagedorn, R; Jaeger, M; Fuhr, G
  • Selective laser sintering of alumina with polymer binders
    Subramanian, K; Vail, N; Barlow, J; Marcus, H
  • Progress toward development of all-printed RFID tags: materials, processes, and devices
    Subramanian, V; Fréchet, JMJ; Chang, PC; Huang, DC; Lee, JB; Molesa, SE; Murphy, AR; Redinger, DR; Volkman, SK
  • Projection micro-stereolithography using digtal micro-mirror dynamic mask
    Sun, C; Fang, N; Wu, DM; Zhang, X
  • Real three-dimensional microstructures fabricated by photopolymerization of resins through two-photon absorption
    Sun, H; Kawakami, T; Xu, Y; Ye, J; Matuso, S; Misawa, H; Miwa, M; Kaneko, R
  • Three-dimensional photonic crystal structures achieved with two-photon absorption photopolymerization of resin
    Sun, HB; Matsuo, S; Misawa, H
  • Direct-write assembly of 3D silk/hydroxyapatite scaffolds for bone co-cultures
    Sun, L; Parker, ST; Syoji, D; Wang, X; Lewis, JA; Kaplan, DL
  • Micro fabrication of integrated FMAs using stereolithography
    Suzumori, K; Koga, A; Haneda, R
  • Investigation of some phenomena occurring during continuous ink-jet printing of ceramics
    Tay, B; Edirisinghe, MJ
  • Micro-rapid-prototyping via multi-layered photo-lithography
    Thian, SCH; Tang, Y; Fuh, JYH; Wong, YS; Lu, L; Loh, HT
  • Three-dimensional bi-chiral photonic crystals
    Thiel, M; Rill, MS; Freymann, GV; Wegener, M
  • Free-space micro-optical modules: the missing link for photonic interconnects to silicon chips
    Thienpont, H; Baukens, V; Ottevaere, H; Volckaerts, B; Tuteleers, P; Vynck, P; Vervaeke, M; Debaes, C; Verschaffelt, G; Hermanne, A; Veretennicoff, I
  • The PAM(2) system: a multilevel approach for fabrication of complex three-dimensional microstructures
    Tirella, A; Maria, C; Criscenti, G; Vozzi, G; Ahluwalia, A
  • Pneumatic dispensing of nano- to picoliter droplets of liquid metal with the StarJet method for rapid prototyping of metal microstructures
    Tropmann, A; Lass, N; Paust, N; Metz, T; Ziegler, C; Zengerle, R; Koltay, P
  • Stereolithography on silicon for microfluidics and microsensor packaging
    Tse, AL; Hesketh, PJ; Rosen, DW; Gole, JL
  • Thermal-expansion and fracture toughness properties of parts made from liquid crystal stereolithography resins
    Ullett, JS; Benson-Tolle, T; Schultz, JW; Chartoff, RP
  • Novel liquid crystal resins for stereolithography
    Ullett, JS; Schultz, JW; Chartoff, RP
  • Microstereolithography and other fabrication techniques for 3D MEMS
    Varadan, VK; Jiang, S; Varadan, VV
  • 3D printing of β-tricalcium phosphate ceramics
    Vorndran, E; Klammert, U; Klarner, M; Grover, LM; Barralet, JE; Gbureck, U
  • Microfabrication for tissue engineering: rethinking the cells-on-a scaffold approach
    Vozzi, G; Ahluwalia, A
  • Microfabricated PLGA scaffolds: a comparative study for application to tissue engineering
    Vozzi, G; Flaim, CJ; Bianchi, F; Ahluwalia, A; Bhatia, S
  • Microfabricated fractal branching networks
    Vozzi, G; Previti, A; Ciaravella, G; Ahluwalia, A
  • Precision extruding deposition and characterization of cellular poly-epsilon-caprolactone tissue scaffolds
    Wang, F; Shor, L; Darling, A; Khalil, S; Güceri, S; Lau, A
  • Laser rapid prototyping of photonic band-gap microstructures
    Wanke, MC; Lehmann, O; Muller, K; Wen, Q; Stuke, M
  • Design of porous scaffolds for cartilage tissue engineering using a three-dimensional fiber-deposition technique
    Woodfield, TBF; Malda, J; Wijn, J; Péters, F; Riesle, J; Blitterswijk, CA
  • Soft lithography
    Xia, Y; Whitesides, GM
  • Fabrication of porous poly(L-lactic acid) scaffolds for bone tissue engineering via precise extrusion
    Xiong, Z; Yan, YN; Zhang, RJ; Sun, L
  • Novel stereolithography system for small size objects
    Xu, G; Zhao, W; Tang, Y; Lu, B
  • Generation of 3-dimensional microstructure by metal jet
    Yamaguchi, K
  • Generation of three-dimensional micro structure using metal jet
    Yamaguchi, K; Sakai, K; Yamanka, T; Hirayama, T
  • A dry powder jet printer for dispensing and combinatorial research
    Yang, S; Evans, JRG
  • Metering and dispensing of powder; the quest for new solid freeforming techniques
    Yang, S; Evans, JRG
  • Fine ceramic lattices prepared by extrusion freeforming
    Yang, HY; Yang, SF; Chi, XP; Evans, JRG
  • Sintering behaviour of calcium phosphate filaments for use as hard tissue scaffolds
    Yang, HY; Yang, SF; Chi, XP; Evans, JRG; Thompson, I; Cook, RJ; Robinson, P
  • Dissolution characteristics of extrusion freeformed hydroxyapatite-tricalcium phosphate scaffolds
    Yang, HY; Thompson, I; Yang, SF; Chi, XP; Evans, JRG; Cook, RJ; Robinson, P
  • Mechanical strength of extrusion freeformed calcium phosphate filaments
    Yang, HY; Yang, SF; Chi, XP; Evans, JRG
  • Focused ion beam insulator deposition
    Young, RJ; Puretz, J
  • Chemically amplified positive resists for two photon three-dimensional microfabrication
    Yu, T; Ober, CK; Kuebler, SM; Zhou, W; Marder, SR; Perry, JW
  • Fused deposition modeling of novel scaffold architectures for tissue engineering applications
    Zein, I; Hutmacher, DW; Tan, KC; Teoh, SH
  • Micro-stereolithography for MEMS. Micro electro mechanical systems (MEMS)
    Zhang, X; Jiang, XN; Sun, C
  • Micro-stereolithography of polymeric and ceramic microstructures
    Zhang, X; Jiang, X; Sun, C
  • Designable 3D nanofabrication by femtosecond laser direct writing
    Zhang, YL; Chen, QD; Xia, H; Sun, HB
  • Additive manufacturing based on optimized mask video projection for improved accuracy and resolution
    Zhou, C; Chen, Y
  • Fabrication of porous scaffolds for bone tissue engineering via low-temperature deposition
    Zhuo, X; Yongnian, Y; Shenguo, W; Renji, Z; Chao, Z
  • Stereolithography and microtechniques
    Zissi, S; Bertsch, A; Jejequel, JY; Corbel, S; Lougnot, DJ; Andre, JC

You’re reading a free preview. Subscribe to read the entire article.

Try 2 weeks free now

DeepDyve is your
personal research library

It’s your single place to instantly
discover and read the research
that matters to you.

Enjoy affordable access to
over 18 million articles from more than
15,000 peer-reviewed journals.

All for just $49/month

Explore the DeepDyve Library

or browse the journals available

Search

Query the DeepDyve database, plus search all of PubMed and Google Scholar seamlessly

Organize

Save any article or search result from DeepDyve, PubMed, and Google Scholar... all in one place.

Access

Get unlimited, online access to over 18 million full-text articles from more than 15,000 scientific journals.

Your journals are on DeepDyve

Read from thousands of the leading scholarly journals from SpringerNature, Elsevier, Wiley-Blackwell, Oxford University Press and more.

All the latest content is available, no embargo periods.

See the journals in your area

DeepDyve

Freelancer

DeepDyve

Pro

Price

FREE

$49/month
$360/year

Save searches from
Google Scholar,
PubMed

Create lists to
organize your research

Export lists, citations

Read DeepDyve articles

Abstract access only

Unlimited access to over
18 million full-text articles

Print

20 pages / month

PDF Discount

20% off

Sign up
for free
Start 14 day
Free Trial