Access the full text.
Sign up today, get DeepDyve free for 14 days.
B. Vieille, Victor Casado, C. Bouvet (2013)
About the impact behavior of woven-ply carbon fiber-reinforced thermoplastic- and thermosetting-composites: A comparative studyComposite Structures, 101
J. Artero-Guerrero, J. Pernas-Sánchez, J. López-Puente, D. Varas (2015)
Experimental study of the impactor mass effect on the low velocity impact of carbon/epoxy woven laminatesComposite Structures, 133
B. Icten, C. Atas, M. Aktaş, R. Karakuzu (2009)
Low temperature effect on impact response of quasi-isotropic glass/epoxy laminated platesComposite Structures, 91
Xiaofei Lou, H. Cai, Pengfei Yu, F. Jiao, Xuecheng Han (2017)
Failure analysis of composite laminate under low-velocity impact based on micromechanics of failureComposite Structures, 163
C. Atas, Yalın Akgun, Olgay Dagdelen, B. Icten, M. Sarıkanat (2011)
An experimental investigation on the low velocity impact response of composite plates repaired by VARIM and hand lay-up processesComposite Structures, 93
Dahsin Liu (2004)
Characterization of Impact Properties and Damage Process of Glass/Epoxy Composite LaminatesJournal of Composite Materials, 38
Geng Han, Zhidong Guan, Xing Li, S. Du (2016)
Failure analysis of carbon fiber reinforced composite subjected to low velocity impact and compression after impactJournal of Reinforced Plastics and Composites, 35
B. Icten, B. Kiral, M. Deniz (2013)
Impactor diameter effect on low velocity impact response of woven glass epoxy composite platesComposites Part B-engineering, 50
F. Sarasini, J. Tirillò, Simone D'Altilia, T. Valente, C. Santulli, F. Touchard, L. Chocinski-Arnault, D. Mellier, L. Lampani, P. Gaudenzi (2016)
Damage tolerance of carbon/flax hybrid composites subjected to low velocity impactComposites Part B-engineering, 91
C. Atas, Dahsin Liu (2008)
Impact response of woven composites with small weaving anglesInternational Journal of Impact Engineering, 35
A. Cherniaev, I. Telichev (2016)
Experimental and numerical study of hypervelocity impact damage in composite materials fabricated by filament windingInternational Journal of Impact Engineering, 98
V. Arıkan, O. Sayman (2015)
Comparative study on repeated impact response of E-glass fiber reinforced polypropylene & epoxy matrix compositesComposites Part B-engineering, 83
J. Carrillo, R. Gamboa, E. Flores-Johnson, P. Gonzalez-Chi (2012)
Ballistic performance of thermoplastic composite laminates made from aramid woven fabric and polypropylene matrixPolymer Testing, 31
S. Zainuddin, T. Arefin, Abdullah Fahim, M. Hosur, J. Tyson, A. Kumar, J. Trovillion, S. Jeelani (2014)
Recovery and improvement in low-velocity impact properties of e-glass/epoxy composites through novel self-healing techniqueComposite Structures, 108
R. Sikarwar, R. Velmurugan, N. Gupta (2014)
Influence of fiber orientation and thickness on the response of glass/epoxy composites subjected to impact loadingComposites Part B-engineering, 60
Hei-lam Ma, Zhemin Jia, K. Lau, J. Leng, D. Hui (2016)
Impact properties of glass fiber/epoxy composites at cryogenic environmentComposites Part B-engineering, 92
C. Atas, Akar Dogan (2015)
An experimental investigation on the repeated impact response of glass/epoxy composites subjected to thermal ageingComposites Part B-engineering, 75
In this study, the effects of temperature and impactor nose diameter on the impact behavior of woven glass-reinforced polyamide 6 (PA6) and polypropylene (PP) thermoplastic composites were investigated experimentally. Impact energies are chosen as 10, 30, 50, 70, 90, 110, 130, and 170 J. The thickness of composite materials is 4 mm. Impact tests were performed using a drop weight impact testing machine, CEAST-Fractovis Plus, and the load capacity of test machine is 22 kN. Hemispherical impactor nose diameter of 12, 7, and 20 mm were used as an impactor. The tests are conducted at room temperature (20°C and 75°C). As a result, the PP composites of the same thickness absorbed more energy than PA6 composites. The amount of absorbed energy of PP and PA6 composites decreased with temperature.
Journal of Elastomers & Plastics – SAGE
Published: Feb 1, 2019
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.