Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Wetting characteristic of Sn-(3-x)Ag-0.5Cu-xBi quaternary solder alloy systems

Wetting characteristic of Sn-(3-x)Ag-0.5Cu-xBi quaternary solder alloy systems This paper aims to invastigate of the wetting and interfacial properties of Sn-(3-x)Ag-0.5Cu-(x)Bi (x = 0.5, 1 and 2 in Wt.%) Pb-free solder alloys at various temperatures ( 250, 280 and 310°C) on Cu substrate in Ar atmosphere.Design/methodology/approachIn this study, new Sn-(3-x)Ag-0.5Cu-xBi systems, low Ag content quaternary lead-free solder alloys, were produced by adding 0.5, 1 and 2% Bi to the near-eutectic SAC305 alloy. The wetting angles of three new alloys, Sn-2.5Ag-0.5Cu-0.5 Bi(SAC-0.5 Bi), Sn-2Ag-0.5Cu-1Bi(SAC-1Bi) and Sn-1Ag-0.5Cu-2Bi(SAC-2Bi) were measured by sessile drop technique on the Cu substrate in argon atmosphere.FindingsIn accordance with the interfacial analyses, intermetallic compounds of Cu3Sn, Cu6Sn5, and Ag3Sn were detected at the SAC-Bi/Cu interface. The results of wetting tests show that the addition of 1 Wt.% Bi improves the wetting properties of the Sn-3Ag-0.5Cu solder. The lowest wetting angle (θ) was obtained as 35,34° for Sn-2Ag-0.5Cu-1Bi alloy at a temperature of 310 °C.Originality/valueThis work was carried out with our handmade experiment set and the production of the quaternary lead-free solder alloy used in wetting tests belongs to us. Experiments were conducted using the sessile drop method in accordance with wetting tests. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Soldering & Surface Mount Technology Emerald Publishing

Wetting characteristic of Sn-(3-x)Ag-0.5Cu-xBi quaternary solder alloy systems

Loading next page...
 
/lp/emerald-publishing/wetting-characteristic-of-sn-3-x-ag-0-5cu-xbi-quaternary-solder-alloy-vobgn56o0u

References (15)

Publisher
Emerald Publishing
Copyright
© Emerald Publishing Limited
ISSN
0954-0911
DOI
10.1108/ssmt-08-2018-0028
Publisher site
See Article on Publisher Site

Abstract

This paper aims to invastigate of the wetting and interfacial properties of Sn-(3-x)Ag-0.5Cu-(x)Bi (x = 0.5, 1 and 2 in Wt.%) Pb-free solder alloys at various temperatures ( 250, 280 and 310°C) on Cu substrate in Ar atmosphere.Design/methodology/approachIn this study, new Sn-(3-x)Ag-0.5Cu-xBi systems, low Ag content quaternary lead-free solder alloys, were produced by adding 0.5, 1 and 2% Bi to the near-eutectic SAC305 alloy. The wetting angles of three new alloys, Sn-2.5Ag-0.5Cu-0.5 Bi(SAC-0.5 Bi), Sn-2Ag-0.5Cu-1Bi(SAC-1Bi) and Sn-1Ag-0.5Cu-2Bi(SAC-2Bi) were measured by sessile drop technique on the Cu substrate in argon atmosphere.FindingsIn accordance with the interfacial analyses, intermetallic compounds of Cu3Sn, Cu6Sn5, and Ag3Sn were detected at the SAC-Bi/Cu interface. The results of wetting tests show that the addition of 1 Wt.% Bi improves the wetting properties of the Sn-3Ag-0.5Cu solder. The lowest wetting angle (θ) was obtained as 35,34° for Sn-2Ag-0.5Cu-1Bi alloy at a temperature of 310 °C.Originality/valueThis work was carried out with our handmade experiment set and the production of the quaternary lead-free solder alloy used in wetting tests belongs to us. Experiments were conducted using the sessile drop method in accordance with wetting tests.

Journal

Soldering & Surface Mount TechnologyEmerald Publishing

Published: Jan 17, 2020

Keywords: Contact angle; Wettability; IMC's; Pb-free solder alloy

There are no references for this article.