Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You and Your Team.

Learn More →

Tools for the Workshop

Tools for the Workshop The Brush Surface Analyzer is designed for rapidly analyzing and directly recording the irregularities of finished surfaces of metals, glass, paper, plated and painted surfaces and the like. It consists of three principal units an analyzing head, a calibrating amplifier and a direct inking oscillograph. These three units give an instantaneous and permanent record of a finished surface, the irregularities of which may be magnified as desired up to 100,000 times. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Aircraft Engineering and Aerospace Technology Emerald Publishing

Tools for the Workshop

Aircraft Engineering and Aerospace Technology , Volume 13 (5): 2 – May 1, 1941

Loading next page...
 
/lp/emerald-publishing/tools-for-the-workshop-6dawMlAExf
Publisher
Emerald Publishing
Copyright
Copyright © Emerald Group Publishing Limited
ISSN
0002-2667
DOI
10.1108/eb030777
Publisher site
See Article on Publisher Site

Abstract

The Brush Surface Analyzer is designed for rapidly analyzing and directly recording the irregularities of finished surfaces of metals, glass, paper, plated and painted surfaces and the like. It consists of three principal units an analyzing head, a calibrating amplifier and a direct inking oscillograph. These three units give an instantaneous and permanent record of a finished surface, the irregularities of which may be magnified as desired up to 100,000 times.

Journal

Aircraft Engineering and Aerospace TechnologyEmerald Publishing

Published: May 1, 1941

There are no references for this article.